AASHTO to ASTM Standard Conversions — Fastener and Structural Designations Chart

Eleven common AASHTO designations mapped to their ASTM counterparts — structural bolts (M-164/A325, M-253/A490), nuts (M-291/A563, M-292/A194), washers (M-293/F436), anchor bolts (M-314/F1554) and the coating/steel pair — transcribed row-for-row from the collected chart.

Last updated: 2026-11

AASHTO to ASTM Standard Conversions — Fastener and Structural Designations Chart — engineering reference
Illustrative image redrawn from real product references — not a photograph of stocked items.

Reference data

Highway and bridge work is specified in AASHTO designations while the fastener on the receiving end of the purchase order is almost always named in ASTM — and the same part sits behind both names. This chart lines up the eleven conversions that cover most structural bolting calls: the structural bolt pair (AASHTO M-164 to ASTM A325 and M-253 to A490), the nuts that mate them (M-291 to A563 carbon and alloy steel nuts, M-292 to A194 high-strength heavy hex nuts), the hardened washer (M-293 to F436), the anchor-bolt standard (M-314 to F1554), and the material/coating rows that surround the hardware — M-183/A36 low-carbon structural steel, M-222/A588 weathering steel, M-223/A572 high-strength low-alloy steel, and the two hot-dip galvanizing designations M-111/A123 (product coatings) and M-232/A153 (fastener coatings). Read it as a routing table, not a substitution certificate: AASHTO standards frequently reference their ASTM counterparts and overlap them, but the specifying agency owns equivalence — a drawing that calls M-164 is satisfied by material made to ASTM A325 only because the agency says so, and galvanized work needs the M-111/M-232 split respected (structural steel sections versus the fasteners threaded into them are coated under different documents). Coating class, testing frequency and lot traceability stay with the governing specification, not this page.

Coverage 11 AASHTO↔ASTM pairs: bolts M-164/A325, M-253/A490; nuts M-291/A563, M-292/A194; washers M-293/F436; anchor bolts M-314/F1554; steels M-183/A36, M-222/A588, M-223/A572; coatings M-111/A123, M-232/A153
Per-row data AASHTO designation, ASTM counterpart, one-line description (e.g. M-293 → F436, "Hardened Steel Washers")
How to read Cross-reference for procurement routing; equivalence is owned by the specifying agency — the chart does not license substitution
Coating split M-111/A123 covers hot-dip galvanized iron and steel products; M-232/A153 covers hot-dip coating on fasteners — threaded hardware follows A153, not A123
Test/lot requirements Not tabulated — governed by the invoked specification; per RFQ
AASHTO to ASTM standard conversions for fasteners and structural materialsCommon AASHTO material/standards designations mapped to their ASTM counterparts with a one-line description, as printed by the source.
AASHTOASTMSpecification Description
M-111A123Hot-Dip Galvanized Coatings on Iron and Steel Products
M-232A153Hot-Dip Coating on Fasteners
M-164A325Structural Bolt
M-253A490Structural Bolt
M-183A36Low Carbon Structural Steel
M-222A588High Strength Weathering Steel
M-223A572High Strength Low Alloy Structural Steel
M-291A563Carbon and Alloy Steel Nuts
M-292A194High Strength Heavy Hex Nuts
M-293F436Hardened Steel Washers

How to use it

  • The chart is a designation cross-reference — material grades, coating weights and mechanical requirements live in the ASTM/AASHTO documents themselves

These figures are engineering reference data, not a stocked-range claim. Parts manufactured or sourced to the standards named here are quoted on request — send an RFQ with your sizes, grades and quantities and the quote carries the confirmed schedule and documents.

Frequently asked questions

A drawing calls out M-164 bolts — can I quote ASTM A325 directly, and where does the galvanizing callout land?

In practice yes — M-164 and A325 name the same structural bolt, and the chart exists precisely so a quote can be written in the language the buyer's drawing uses while the mill ships to the ASTM document. What the conversion does not do is let either side improvise: equivalence holds because AASHTO references the ASTM standard, so the certificate, test reports and lot marking must satisfy the ASTM document the AASHTO one invokes — and on public work, the agency's own supplement (coating class, rotation-capacity testing, lot frequency) rides on top. Galvanizing is the case worth pausing on, because the two coating standards are not interchangeable: M-111/A123 governs hot-dip coatings on iron and steel products (sections, plates, hardware generally), while M-232/A153 governs the fasteners themselves — a galvanized assembly needs the bolts, nuts and washers coated under A153 (which threads after coating or oversizes to fit) and the surrounding steelwork under A123. Quote the fastener line to A153/M-232 and note the split explicitly. Anything beyond the eleven rows here — specialty steels, mechanical-vs-hot-dip decisions, metric conversions — is not charted and comes back as an RFQ answer.

What is the MOQ and lead time for structural bolts to these standards?

The minimum order quantity for AASHTO to ASTM Standard Conversions — Fastener and Structural Designations Chart is 1,000–10,000 pieces depending on size. Stock items of AASHTO to ASTM Standard Conversions — Fastener and Structural Designations Chart ship in 3–7 days; high-strength and custom parts in 15–25 days. Confirm the exact schedule against quantity, size mix and coating at quotation.