ISO 9001 · DIN · ISO · ANSI/ASME standard & custom fasteners
Products
Standard and custom industrial fasteners manufactured in Hefei — DIN, ISO, JIS, ANSI/ASME and GB grades, from carbon steel to titanium. Owner-declared factory data is merged with gate-checked specifications extracted from published technical sources.
Threaded Fasteners & Washers 4
Bolted-joint families: bolts, screws and nuts with their mating washers, to DIN, ISO, JIS, ANSI/ASME and ASTM grades.
Illustrative image — not a photograph of stocked items.
Product family
Bolts
DIN 933 / DIN 931 · ISO 4014 / 4017 · grades 8.8, 10.9, A2-70, A4-80
Bolts are threaded fasteners with a head, available in various grades, materials, and dimensions for industrial and construction application
diameter: Up to M36 / 1-1/2" (36 mm)length: Up to 300 mmthread: Metric (M), UNC/UNF, BSW/BSFstrength grade: Grade 8.8 / 10.9 / 12.9; A2-70 / A4-80 stainlesshead type: Hex, socket head cap, carriage, flangecoating: Zinc plated (blue/yellow), Geomet, Dacromet, hot-dip galvanized
Bolts are usually ordered with matching nuts and washers; the pairings below are complements, not equivalent substitutes — confirm the fit against your drawing.
View specifications →
Illustrative image — not a photograph of stocked items.
Product family
Screws
DIN 912 / ISO 4762 · DIN 913 / ISO 4026 · DIN 7991 / ISO 10642 · DIN 916 / ISO 4029 · DIN 7985 / ISO 7045
Screws are externally threaded fasteners used to join materials, available in machine, driver, and metric styles with a range of head types,
diameter: Up to M36 / 1-1/2" (36 mm)length: Up to 300 mmthread: Metric (M), UNC/UNF, BSW/BSFhead type: Hex socket cap, countersunk, button headdrive type: Hex socket, Phillips, slotted, Torx, squarecoating: Zinc plated (blue/yellow), Geomet, Dacromet, hot-dip galvanized
Screws run against the nut and washer families below; threaded inserts are the cross-family complement for tapped-hole repair and reinforcement.
View specifications →
Illustrative image — not a photograph of stocked items.
Product family
Nuts
DIN 934 / ISO 4032 · DIN 985 / ISO 10511 · ASTM A563 / A194
Metric and inch hex nuts, heavy hex nuts, flange nuts, jam nuts and locking nuts for bolted assemblies. Specify the thread, nut pattern, pro
diameter: Up to M36 / 1-1/2" (36 mm)thread: Metric (M), UNC/UNF, BSW/BSFstrength grade: Grade 8 / 10 / 12 (ISO 898-2); A2 / A4 stainless (ISO 3506-2)coating: Zinc plated (blue/yellow), Geomet, Dacromet, hot-dip galvanized
Nuts are ordered against the bolt class they mate with — the pairings below are joint complements, not equivalent substitutes.
View specifications →
Illustrative image — not a photograph of stocked items.
Product family
Washers
DIN 125 A/B · DIN 9021 · ISO 7089 / 7090
Flat washers support load distribution, protect bearing surfaces and help maintain the specified seating geometry in bolted assemblies. Lock
diameter: Up to M36 / 1-1/2" (36 mm)coating: Zinc plated (blue/yellow), Geomet, Dacromet, hot-dip galvanized
Washers are sized to the bolt or nut they seat — the families below are joint complements, not equivalent substitutes.
View specifications →Rivets 1
Non-threaded permanent fastening — blind (pop), solid and structural rivets.
Anchors 1
Cast-in foundation anchor rods, including L-shaped and bent anchor bolts, to ASTM F1554 Grades 36, 55 and 105.
Surface Finishes & Coatings 1
Zinc electroplate, hot-dip galvanizing, zinc-nickel, zinc-flake (Dacromet/Geomet) and PTFE post-treatment, carried with fastener orders.
Pins 1
Non-threaded locating and fastening pins — DIN 7 / ISO 2338 parallel dowel pins and DIN 1481 / ISO 8752 straight slotted spring pins (heavy type).
Self-Clinching Fasteners 1
PEM-style self-clinching hardware for thin sheet — self-locking and non-locking clinch nuts (Series CFE/CFEO/CFEX/CFEOX), with standoffs and studs to follow as the range expands.
Retaining Rings 1
Metric retaining rings (circlips) to DIN 471 (external, shafts) and DIN 472 (internal, bores) - axially assembled into grooves on shafts and in housings.
Exotic Alloy & High-Temperature Fasteners 1
Material-grade fastener selection for extreme joints - nickel superalloys (Inconel 718, X-750), A-286 aerospace stainless, ASTM A193 B8M/B8M3 austenitic studs, Monel K-500 and titanium, each with its own temperature window, strength class and service environment.
Threaded Inserts 1
Insert-type selection for creating or repairing internal threads - wire and tangless helical inserts, self-tapping and heavy-duty variants, key-locking anti-rotation inserts, heat-set inserts for plastics and 3D prints, stainless-steel corrosion service, and expansion rivet nuts for blind sheet-metal installation.
Threaded Rods & Lead-Screw Threads 2
Headless fully threaded rods and studs (DIN 975 / DIN 976-1, ASME B18.31.2) plus metric trapezoidal thread forms (DIN 103) for suspension systems, flange bolting and linear power transmission.
Illustrative image — not a photograph of stocked items.
Product family
Threaded Rods & Studs
DIN 975 (withdrawn, integrated into DIN 976-1) · ASME B18.31.2 · ASTM A193/A194 pairings
Headless fully threaded rods and studs used with nuts on both ends — DIN 975 / DIN 976-1 metric rods (M2–M64) and ASME B18.31.2 continuous-t
strength grade: Stainless Class 70 (≥700 MPa) up to M24, Class 50 (≥500 MPa) M27 and above,Carbon steel 4.6, 4.8, 8.8, 10.9, 12.9,Stud bolts paired to ASTM A193 (B7, B8/B8M), A320 L7, A453 Gr 660 with A194 nuts
Threaded rod carries load through nuts on both ends; the grades and standards below change what the rod can hold, not how it installs.
View specifications →
Illustrative image — not a photograph of stocked items.
Product family
Trapezoidal Thread Rods & Nuts
DIN 103 · Tr10–Tr60 · tolerance class 7e · steel 1.0401 (C15) / stainless 1.4301
DIN 103 metric trapezoidal (Tr) thread rods and mating nuts for linear power transmission — Tr10–Tr60 rod series with matched pitch per size
Tr threads are transmission threads for converting rotation to linear motion — a different job from ISO metric clamping threads, not a coarse-pitch variant of them.
View specifications →Lifting Eye Fasteners 1
Lifting eye bolts and screws (DIN 580 / DIN 444), shoulder-type lifting eye bolts (ASME B18.15) and lifting eye nuts (DIN 582) for load-attachment points on machines and fabricated assemblies.
Weld Fasteners 1
Weld nuts that fuse into sheet-metal assemblies — square per DIN 928 and hex per DIN 929 — replacing tapped holes where the far side of the panel is unreachable.
Pipe Support & Clamping 1
U-bolts for pipe clamping and support in waterworks and mechanical services, measured per the IFI-136 convention (length, hook, diameter, thread length).
Quality assurance & delivery terms
Full batch traceability from raw material to finished product. Every shipment leaves with documented inspection results, so what you approve in sampling is what arrives in production.
Certifications
- ISO 9001:2015
- RoHS
- REACH
Documents with every order
- Mill Test Certificate (MTC)
- Dimensional Report
- Salt Spray Test Report
Typical lead times
- Standard samples: 3-5 Days
- Bulk standard parts: 15-25 Days
- Custom OEM parts: 30-45 Days
Manufacturing base
- 5000 m² facility, 8 production lines
- 50-100 employees
- Monthly output 80-120 Tons
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your inquiry
- ✓ Standard and property class (e.g. DIN 912, ISO 4762, class 8.8) — or a drawing for custom parts.
- ✓ Sizes, lengths and thread type (metric or inch).
- ✓ Quantity per size and your target delivery date.
- ✓ Destination country, plus any coating or finish requirement.
- ✓ Any documents you need with the shipment (e.g. mill test certificate) so the quote includes them.
- ✓ Your inquiry goes straight to the factory team by email and gets a reply within 24 hours.
- ✓ Factory-direct pricing
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support