BS 449 Bolt Loading Capacities — Grade 6.8
BS 449 working loading capacities for grade 6.8 bolts, M 1.6 to M 68 — tension capacity at 210 N/mm 2, shear at 140 N/mm 2, and bearing capacity at a bolt bearing strength of 438 N/mm 2 (ply 250 N/mm 2), with end distance at least 2d.
Last updated: 2026-11
Reference data
This page tabulates working loading capacities for grade 6.8 bolts in the BS 449 (structural steelwork) tradition: for every nominal diameter from M 1.6 to M 68 it gives the tensile capacity on the shank and on the threaded portion at 210 N/mm 2, the single- and double-shear capacity at 140 N/mm 2, and the bearing capacity of the bolt for ply thicknesses from 5 mm to 25 mm at a bolt bearing strength of 438 N/mm 2 against a ply bearing strength of 250 N/mm 2 — all conditional on an end distance of at least 2d (twice the bolt diameter). The capacity ladder is a design reference, not a dimensional table: the same geometry appears in five grades on this site (4.6, 6.8, 8.8, 10.9, 12.9), each with its own stress assumptions, so match the page to the grade your connection specifies. Tension capacities split shank vs threads because the threaded portion's reduced effective area governs; shear doubles from single to double plane at the same stress. Head dimensions, lengths, threads and finishes are not tabulated here — per RFQ against the bolt's dimensional standard.
| Standard | BS 449 loading-capacity table, Bolt Grade = 68 (printed without the decimal point; the grade is 6.8 per the page title) — capacities at the printed stress assumptions |
|---|---|
| Grade | 6.8 |
| Diameter range | M 1.6 to M 68, 29 nominal diameters (preferred sizes parenthesised in the table, e.g. (M 14), (M 27)) |
| Tension capacity | Shank kN and Threads kN at 210 N/mm 2 |
| Shear capacity | Single kN and Double kN at 140 N/mm 2 |
| Bearing capacity | Bolt bearing strength 438 N/mm 2; ply bearing strength 250 N/mm 2; for end distance >= 2d |
| Ply thickness grid | Bearing capacity in kN for ply thicknesses 5, 6, 7, 8, 9, 10, 12.5, 15, 20 and 25 mm |
| Not tabulated | Head dimensions, lengths, thread classes, finishes, materials — per RFQ |
| Dia. mm | Tensile Area mm 2 | Shank kN | Threads kN | Single kN | Double kN | 5 mm | 6 mm | 7 mm | 8 mm | 9 mm | 10 mm | 12.5 mm | 15 mm | 20 mm | 25 mm |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M 1.6 | 1.27 | 0.422 | 0.267 | 0.281 | 0.562 | 2.0 | 2.4 | 2.8 | 3.2 | 3.6 | 4.0 | 5.0 | 6.0 | 8.0 | 10.0 |
| M 2 | 2.07 | 0.66 | 0.435 | 0.44 | 0.88 | 2.5 | 3.0 | 3.5 | 4.0 | 4.5 | 5.0 | 6.3 | 7.5 | 10.0 | 12.5 |
| M 2.5 | 3.39 | 1.03 | 0.712 | 0.687 | 1.374 | 3.1 | 3.8 | 4.4 | 5.0 | 5.6 | 6.3 | 7.8 | 9.4 | 12.5 | 15.6 |
| M 3 | 5.03 | 1.48 | 1.06 | 0.99 | 1.98 | 3.8 | 4.5 | 5.3 | 6.0 | 6.8 | 7.5 | 9.4 | 11.3 | 15.0 | 18.8 |
| M 4 | 8.78 | 2.64 | 1.84 | 1.76 | 3.52 | 5.0 | 6.0 | 7.0 | 8.0 | 9.0 | 10.0 | 12.5 | 15.0 | 20.0 | 25.0 |
| M 5 | 14.2 | 4.12 | 2.98 | 2.75 | 5.5 | 6.3 | 7.5 | 8.8 | 10.0 | 11.3 | 12.5 | 15.6 | 18.8 | 25.0 | 31.3 |
| M 6 | 20.1 | 5.94 | 4.22 | 3.96 | 7.92 | 7.5 | 9.0 | 10.5 | 12.0 | 13.5 | 15.0 | 18.8 | 22.5 | 30.0 | 37.5 |
| M 8 | 36.6 | 10.6 | 7.69 | 7.04 | 14.08 | 10.0 | 12.0 | 14.0 | 16.0 | 18.0 | 20.0 | 25.0 | 30.0 | 40.0 | 50.0 |
| M 10 | 58 | 16.5 | 12.2 | 11 | 22 | 12.5 | 15.0 | 17.5 | 20.0 | 22.5 | 25.0 | 31.3 | 37.5 | 50.0 | 62.5 |
| M 12 | 84.3 | 23.8 | 17.7 | 15.8 | 31.6 | 15.0 | 18.0 | 21.0 | 24.0 | 27.0 | 30.0 | 37.5 | 45.0 | 60.0 | 75.0 |
| (M 14) | 115 | 32.3 | 24.2 | 21.6 | 43.2 | 17.5 | 21.0 | 24.5 | 28.0 | 31.5 | 35.0 | 43.8 | 52.5 | 70.0 | 87.5 |
| M 16 | 157 | 42.2 | 33 | 28.1 | 56.2 | 20.0 | 24.0 | 28.0 | 32.0 | 36.0 | 40.0 | 50.0 | 60.0 | 80.0 | 100.0 |
| (M 18) | 192 | 53.4 | 40.3 | 35.6 | 71.2 | 22.5 | 27.0 | 31.5 | 36.0 | 40.5 | 45.0 | 56.3 | 67.5 | 90.0 | 112.5 |
| M 20 | 245 | 66 | 51.5 | 44 | 88 | 25.0 | 30.0 | 35.0 | 40.0 | 45.0 | 50.0 | 62.5 | 75.0 | 100.0 | 125.0 |
| (M 22) | 303 | 79.8 | 63.6 | 53.2 | 106.4 | 27.5 | 33.0 | 38.5 | 44.0 | 49.5 | 55.0 | 68.8 | 82.5 | 110.0 | 137.5 |
| M 24 | 353 | 95 | 74.1 | 63.3 | 126.6 | 30.0 | 36.0 | 42.0 | 48.0 | 54.0 | 60.0 | 75.0 | 90.0 | 120.0 | 150.0 |
| (M 27) | 459 | 120.2 | 96.4 | 80.2 | 160.4 | 33.8 | 40.5 | 47.3 | 54.0 | 60.8 | 67.5 | 84.4 | 101.3 | 135.0 | 168.8 |
| M 30 | 561 | 148.4 | 117.8 | 99 | 198 | 37.5 | 45.0 | 52.5 | 60.0 | 67.5 | 75.0 | 93.8 | 112.5 | 150.0 | 187.5 |
| (M 33) | 694 | 179.6 | 145.7 | 119.7 | 239.4 | 41.3 | 49.5 | 57.8 | 66.0 | 74.3 | 82.5 | 103.1 | 123.8 | 165.0 | 206.3 |
| M 36 | 817 | 213.8 | 171.6 | 142.5 | 285 | 45.0 | 54.0 | 63.0 | 72.0 | 81.0 | 90.0 | 112.5 | 135.0 | 180.0 | 225.0 |
| (M 39) | 976 | 250.9 | 205 | 167.2 | 334.4 | 48.8 | 58.5 | 68.3 | 78.0 | 87.8 | 97.5 | 121.9 | 146.3 | 195.0 | 243.8 |
| M 42 | 1120 | 290.9 | 235.2 | 194 | 388 | 52.5 | 63.0 | 73.5 | 84.0 | 94.5 | 105.0 | 131.3 | 157.5 | 210.0 | 262.5 |
| (M 45) | 1300 | 334 | 273 | 222.7 | 445.4 | 56.3 | 67.5 | 78.8 | 90.0 | 101.3 | 112.5 | 140.6 | 168.8 | 225.0 | 281.3 |
| M 48 | 1470 | 380 | 308.7 | 253.3 | 506.6 | 60.0 | 72.0 | 84.0 | 96.0 | 108.0 | 120.0 | 150.0 | 180.0 | 240.0 | 300.0 |
| (M 52) | 1760 | 446 | 369.6 | 297.3 | 594.6 | 65.0 | 78.0 | 91.0 | 104.0 | 117.0 | 130.0 | 162.5 | 195.0 | 260.0 | 325.0 |
| M 56 | 2030 | 517.2 | 426.3 | 344.8 | 689.6 | 70.0 | 84.0 | 98.0 | 112.0 | 126.0 | 140.0 | 175.0 | 210.0 | 280.0 | 350.0 |
| (M 60) | 2360 | 593.8 | 495.6 | 395.8 | 791.6 | 75.0 | 90.0 | 105.0 | 120.0 | 135.0 | 150.0 | 187.5 | 225.0 | 300.0 | 375.0 |
| M 64 | 2680 | 675.6 | 562.8 | 450.4 | 900.8 | 80.0 | 96.0 | 112.0 | 128.0 | 144.0 | 160.0 | 200.0 | 240.0 | 320.0 | 400.0 |
| (M 68) | 3060 | 762.7 | 642.6 | 508.4 | 1016.8 | 85.0 | 102.0 | 119.0 | 136.0 | 153.0 | 170.0 | 212.5 | 255.0 | 340.0 | 425.0 |
- Row 1 (M 1.6): the collected header prints "Bolt Grade = 68" without the decimal point; the grade is 6.8 per the page title
How to use it
- Material and finish specified per RFQ against the dimensional standard of the bolt you are buying (hex bolt, stud or socket product). Grade 6.8 capacity values assume the printed stresses; if your connection design uses different ply strengths, end distances below 2d, or a different code basis, the table values do not transfer — send the joint stack-up (ply thicknesses, hole type, end distance) and grade with the RFQ so the capacities can be quoted against the actual geometry
These figures are engineering reference data, not a stocked-range claim. Parts manufactured or sourced to the standards named here are quoted on request — send an RFQ with your sizes, grades and quantities and the quote carries the confirmed schedule and documents.
Frequently asked questions
How do I read the grade 6.8 loading-capacity table for a real joint?
Pick the row for the bolt diameter, then read three numbers. Tension: use the Threads kN column if the shear plane or the grip puts threads in the stressed section, the higher Shank kN value only where the full-diameter shank carries the load. Shear: Single kN for one shear plane, Double kN for two — the double value is exactly twice the single at the same stress. Bearing: take the ply thickness actually passed through (the thinnest ply, if several) and read kN across the 5–25 mm columns; the grid already assumes end distance of at least 2d and a ply bearing strength of 250 N/mm 2. The connection's allowable load is the smallest of the three — tension, shear or bearing — and combined tension-plus-shear needs an interaction check against the governing code, which this table alone does not cover.
Why are there five separate BS 449 capacity pages instead of one table?
Because the grade is the load-bearing assumption: each page tabulates the same 29 diameters but at that grade's own stress values — tension from 120 N/mm 2 at grade 4.6 up to 420 N/mm 2 at grade 12.9, shear and bolt bearing strength rising with it, while the ply bearing strength stays 250 N/mm 2 across all five. Reading a grade 8.8 joint from the grade 4.6 page would understate capacity by more than half; the reverse would overstate it. Choose the page matching the property grade marked on the bolts you order (ISO 898-1 classes use the same numbering), then quote lengths, heads and finish per RFQ — this table series carries capacities only, no dimensions.