Hex bolt vs socket head cap screw: ISO 4014 / 4017 vs DIN 912 / ISO 4762

The choice between an external-wrench hex head and an internal-key socket head decides the tooling, the envelope and — at the top of the range — the strength class you can buy off the shelf. This page compares the four identifiers we publish specification pages for, two from each family, using only fields that mean the same thing across the columns. Where a figure is not established by the collected evidence, or sits at a different anchor size per column, the cell says so; nothing is converted or filled in with an assumption.

Comparison table

The hex columns come from the bolts family, the socket columns from the screws family — each cell links through to the full specification page.

Field ISO 4014 Hex Bolt (partial thread)

in Bolts

ISO 4017 Hex Screw (full thread)

in Bolts

DIN 912 Socket Head Cap Screw

in Screws

ISO 4762 Socket Head Cap Screw

in Screws

Standard & designation status ISO 4014 — hexagon head bolt, product grades A/B, partially threaded; predecessor DIN 931 ISO 4017 — hexagon head screw, product grades A/B, threaded to the head; predecessor DIN 933 DIN 912 — hexagon socket head cap screw; current norm DIN EN ISO 4762 ISO 4762 — the international designation that absorbed DIN 912
Size range M1.6–M64 (M1/M1.2/M1.4 rows in collected tables are manufacturer series — quote as specials) M1.6–M64 (M1/M1.2/M1.4 rows in collected tables are manufacturer series — quote as specials) M1.6–M64 M1.6–M64
Thread & extent

The 4014/4017 split is thread extent, not strength; both share the same head geometry.

Metric coarse; partial thread with a standard-defined unthreaded shank Metric coarse; full thread along the usable length beneath the head Metric coarse, 6g (5g6g for class 12.9); threaded to the head Metric coarse, 6g (5g6g for class 12.9); threaded to the head
Wrenching

External hex wrench (across flats, s) versus internal hex key (socket, s) — different access and torque scale by design. Figures sit at each column's collected anchor size.

External wrench, s = 16 mm at M10 External wrench, s = 16 mm at M10 (head geometry shared with ISO 4014) Internal hex key, s = 8 mm nominal at M10 Internal hex key, s = 10 mm nominal at M12 (different anchor size from the M10 columns — not directly comparable)
Head height (k)

Each column quotes its own collected basis; the socket head is taller at the same diameter but bears on a smaller circular face.

k nominal 3.5 mm at M5, tabulated up to 40 mm at M64 k nominal 3.5 mm at M5, tabulated up to 30 mm at M48 k max 10.00 mm at M10 k max 12.00 mm at M12 (different anchor size — not directly comparable)
Strength classes available Property class per ISO 898-1, specified separately from the dimensional standard (8.8/10.9 typical) Conditional — confirm configuration Property class per ISO 898-1, specified separately from the dimensional standard (8.8/10.9 typical) Conditional — confirm configuration Steel 8.8, 10.9, 12.9; stainless A2, A4 — 12.9 the common stock condition Steel 8.8, 10.9, 12.9; stainless A2, A4 — 12.9 the common stock condition
Where it wins

Orientation drawn from the identifier pages and the linked knowledge guide, not a performance claim.

General and structural assemblies needing an external-wrench joint and a defined unthreaded shank Through-bolting where full thread engagement or adjustment along the shank is needed Precision equipment, tooling, tight envelopes — internal keying and a cylindrical head that fits counterbores Same as DIN 912 under the international designation for global drawings
  • Verified
  • Differs
  • Unverified — confirm at RFQ
  • Conditional — confirm configuration

How to choose

Within the hex family (4014 vs 4017)

The split is thread extent, not strength: ISO 4014 carries a defined unthreaded shank so shear lands on solid material, while ISO 4017 is threaded to the head for through-bolting where grip length varies. Both share head geometry, so the wrench investment does not change between them.

Within the socket family (DIN 912 vs ISO 4762)

These name the same screw — DIN 912's current norm is DIN EN ISO 4762 — so the choice follows the drawing and the receiving inspector's expectation, not the hardware. Quote the designation the drawing uses and certify against that wording.

Across the two families

Socket head cap screws stock in class 12.9 as the common condition, so coating choice follows the high-strength embrittlement guidance rather than the ordinary finishing shelf. Hex bolts cover the general and structural duty at 8.8 / 10.9 with full coating freedom including hot-dip galvanizing. The mechanism-level comparison is in the drive-comparison knowledge guide linked below.

How much installation clearance does each head need?

Clearance is the first physical filter, and the two families fail in opposite directions. A hex bolt needs wrench clearance around the entire head — roughly 1.5× the head width of swing room for a wrench or socket — while a socket head cap screw only needs vertical clearance for a hex key, and its cylindrical head is narrower than a hex head of the same thread size. If the joint offers side access but no swing room, neither family installs cleanly: check the access geometry before the specification, not on the assembly floor.

Can a hex bolt stand in for a socket head cap screw — or the reverse?

Two substitution limits decide this, and both fail quietly. Geometry first: a counterbored hole is sized exactly to the cylindrical socket head, so the wider hexagonal profile cannot seat in a counterbore designed for a socket cap — check the hole diameter before substituting in either direction. Strength second: standard socket caps are alloy steel at class 12.9, and a Grade 5 hex bolt dropped into that joint carries only about 60% of the clamping-force capacity the designer specified — never substitute a lower grade where the drawing calls for the higher one.

Why does the socket family stock in class 12.9, and what does the drive demand back?

The internal hex is both the advantage and the weak point. Socket head height equals the nominal diameter by design — the deeper socket gives the key more engagement and more torque capacity before the socket rounds out, and a lower-grade material would not survive the torque an L-key can apply, which is why class 12.9 is the common stock condition rather than an upgrade. The same geometry means the internal hex is the first element to strip under over-torque, so production tightening on socket caps belongs on a torque wrench against the manufacturer's specification.

Which family costs more, and when is the premium justified?

Socket head cap screws typically cost 2–4× the equivalent hex cap screw. The premium buys the envelope and the strength shelf — the flush counterbored fit and the class 12.9 stock condition — not a general durability advantage. Where access is free, the load is ordinary and hot-dip galvanizing governs, paying the socket premium buys nothing a Grade 8 or class 10.9 hex bolt does not already deliver.

What this page cannot verify

This page cannot verify installation torque values, joint strength, or the machined counterbore dimensions of your actual part — those live on the drawing and in the manufacturer's torque specification for the exact grade and lubrication condition. Per-size head figures sit at each column's collected anchor size and are marked, not converted. Confirm the grade marking and the certificate at receiving, and match the thread pitch with a gauge before substituting any fastener on an existing joint.

Frequently asked questions

When does a socket head cap screw beat a hex bolt?

Three practical cases: a compact or counterbored envelope where a cylindrical head is the only head that fits; precision assemblies where an internal hex key avoids swinging a wrench; and high-strength compact joints, because socket caps ship in class 12.9 as the common stock condition. Where an external wrench, hot-dip galvanizing or structural practice governs, the hex bolt stays the right answer.

ISO 4014 or ISO 4017 — does the thread extent matter?

Yes, and it is a geometry decision, not a strength one. ISO 4014 carries a defined unthreaded shank, which puts shear on the solid shank rather than the threads — the usual choice for fitted structural joints. ISO 4017 is threaded to the head, which suits through-bolting where grip length varies or adjustment along the shank is needed. Both share the same head geometry, so the wrench does not change.

What fails first if a socket head cap screw is over-torqued?

The internal hex, not the thread. Socket head cap screws can strip internally when over-torqued because the internal hex is the weak point of the design — the head and thread may look undamaged while the drive is rounded out. Production tightening on socket caps belongs on a torque wrench against the manufacturer's specification, and an L-key should be torqued on its short arm with the long arm reserved for reaching into tight spaces.

Do hex bolts and socket head cap screws share the same threads?

Yes — thread form and pitch do not change with head style, so an M8 × 1.25 socket cap screws into the same nut as an M8 × 1.25 hex bolt, and the same holds across imperial sizes. The caveat sits on the socket side: fine-thread socket caps exist (M8 × 1.0 alongside the standard M8 × 1.25), so gauge the pitch with a thread gauge when replacing a fastener instead of assuming coarse because the diameter matches.

Are DIN 912 and ISO 4762 interchangeable on a drawing?

They name the same screw — DIN 912's current norm is DIN EN ISO 4762 — so the choice is usually about which designation the drawing and the receiving inspector expect. Quote the designation the drawing uses; if a customer standard still says DIN 912, ship and certify against that wording and confirm at RFQ.

What do the head dimensions actually measure, and why do they differ?

The two heads solve different geometry problems, and the numbers make the trade concrete. A socket cap screw head is cylindrical with a height roughly equal to the bolt diameter and a width across the head of about 1.5x the diameter — that height is deliberate: a taller head creates more socket depth, which means more hex-key engagement and more torque capacity before the socket rounds out. A hex bolt head is wide and flat with width across flats of roughly 1.5-1.7x the diameter for metric (slightly larger for SAE); the large bearing surface spreads clamping load over a bigger area, which is what you want in soft materials like aluminum or plastic, ideally with a washer. On a concrete size: for 1/2"-13, the hex cap screw head is 3/4" across flats and 5/16" tall, while the socket head is a 0.75"-diameter cylinder 0.50" tall — the hex head is wider but shorter, the socket head taller and narrower. Grade ranges follow the same pattern: hex cap screws span Grade 2 (74 ksi tensile, light duty), Grade 5 (120 ksi, standard industrial) and Grade 8 (150 ksi, high strength), while socket caps stock almost entirely in the high-tensile 10.9/12.9 classes — so the socket family buys strength in a compact, recessable head, and the hex family buys bearing area and wrench access at a lower price.

Which drive is the weak side, and how do you drive it without rounding?

The failure side differs by family, and so does the tooling discipline. The hex cap screw’s external hex takes larger wrenches with better leverage and therefore tolerates higher applied torque — its clearance cost is radial, roughly 1.5x the head width of swing room all around. The socket cap screw needs only vertical access, but its internal hex is the weak point: over-torque strips the socket from the inside, which is why the tooling rule is a torque wrench against the manufacturer’s specification, not feel. Metric socket sizes pair predictably — M4 -> 3 mm, M5 -> 4 mm, M6 -> 5 mm, M8 -> 6 mm, M10 -> 8 mm, M12 -> 10 mm (imperial: 1/4-20 -> 3/16", 3/8-16 -> 5/16", 1/2-13 -> 3/8"). Drive with the L-key’s long arm to reach a confined seat, but finish the torque on the short arm — the long arm multiplies torque past what the socket survives; a ball-end key buys up to 25 degrees of off-axis access at the cost of full-strength engagement, and T-handles or hex-bit drivers reduce rounding risk on production work. Once a socket shows wear or a prior slip, replace the fastener instead of chasing a partially rounded socket — the screws are inexpensive; the tapped hole is not.

Individual specification pages

Each identifier has its own page — full dimension tables, strength classes and RFQ guidance.

The full drive-style mechanics and head-type selection: Hex bolt vs socket head cap screw compared

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Hex bolts and socket screws inquiry

  • ✓ Standard and property class (e.g. DIN 912, ISO 4762, class 8.8) for the Hex bolts and socket screws — or a drawing for custom parts.
  • ✓ Sizes, lengths and thread type (metric or inch).
  • ✓ Quantity per size and your target delivery date.
  • ✓ Destination country, plus any coating or finish requirement for the Hex bolts and socket screws.
  • ✓ Any documents you need with the shipment of the Hex bolts and socket screws (e.g. mill test certificate) so the quote includes them.
  • ✓ Your inquiry goes straight to the factory team by email and gets a reply within 24 hours.
  • ✓ Factory-direct pricing for your Hex bolts and socket screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.