Pipe Support & Clamping
U-bolts for pipe clamping and support in waterworks and mechanical services, measured per the IFI-136 convention (length, hook, diameter, thread length).
U-bolts: measuring, material and lining practice
U-bolts for pipe clamping are quoted from a measurement convention before anything else. The trade convention (IFI-136) measures a U-bolt by the inside width and inside height of the U and the threaded-leg length below the bend, so a U-bolt quoted "for a pipe size" without those dimensions is ambiguous — pipe OD, insulation, and whether the bolt must clear a support steel section all change the same nominal size. With insulation, the inside width must clear the insulated diameter, and the usual practice is to state the pipe OD, the insulation thickness and the supporting steel, letting us size the U rather than reverse-engineering it from a photo.
Material and lining decide the service life. Plain carbon steel with coating is the mechanical-services default; hot-dip galvanized and stainless options carry waterworks and corrosive environments; and where the U-bolt contacts an insulated or coated pipe, a lining — EPDM, neoprene or similar — prevents both coating damage and vibration transfer, and should be quoted with the bolt so the groove geometry matches. Thread engagement on both legs, the matching heavy hex nuts, and whether the bolt must anchor (both nuts torqued) or allow thermal movement (locked with a gap) are the remaining questions. Because waterworks U-bolts often carry a certification requirement from the utility side, naming any certificate and coating standard in the first inquiry keeps the production batch and its paperwork in one pass.
Quality assurance & delivery terms
Full batch traceability from raw material to finished product. Every shipment leaves with documented inspection results, so what you approve in sampling is what arrives in production.
Certifications
- ISO 9001:2015
- RoHS
- REACH
Documents with every order
- Mill Test Certificate (MTC)
- Dimensional Report
- Salt Spray Test Report
Typical lead times
- Standard samples: 3-5 Days
- Bulk standard parts: 15-25 Days
- Custom OEM parts: 30-45 Days
Manufacturing base
- 5000 m² facility, 8 production lines
- 50-100 employees
- Monthly output 80-120 Tons
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your Pipe Support & Clamping inquiry
- ✓ Standard and property class (e.g. DIN 912, ISO 4762, class 8.8) for the Pipe Support & Clamping — or a drawing for custom parts.
- ✓ Sizes, lengths and thread type (metric or inch).
- ✓ Quantity per size and your target delivery date.
- ✓ Destination country, plus any coating or finish requirement for the Pipe Support & Clamping.
- ✓ Any documents you need with the shipment of the Pipe Support & Clamping (e.g. mill test certificate) so the quote includes them.
- ✓ Your inquiry goes straight to the factory team by email and gets a reply within 24 hours.
- ✓ Factory-direct pricing for your Pipe Support & Clamping
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support