Pins

Non-threaded locating and fastening pins — DIN 7 / ISO 2338 parallel dowel pins and DIN 1481 / ISO 8752 straight slotted spring pins (heavy type).

Dowel, clevis and spring-pin selection logic

Pin selection follows the job the pin does. Parallel dowel pins per DIN 7 / ISO 2338 locate two machined parts against each other with a defined fit, so the bore tolerance and the extraction method matter as much as the pin diameter — an inquiry that names the fit (interference or transition) and whether the pin will be pressed or drifted in gets the correct end chamfer and hardness. Slotted spring pins per DIN 1481 / ISO 8752 instead work by compression: the slot lets the pin flex to fill the hole, which tolerates repeated assembly and vibration, and they are the usual answer where a shear pin may need to be driven out and replaced.

Beyond those two workhorses, the family extends to clevis pins for hinged linkages, tapered pins for assemblies that are dismantled from one side, and coiled spring pins where hole preparation is thinner sheet. Material and coating follow the surrounding assembly — a stainless dowel in an aluminium housing solves a corrosion pairing that a plated steel pin cannot — and hardness class matters where the pin is expected to shear predictably rather than resist. Because pin failures are rarely visible until disassembly, stating the load character (static shear, vibration, or safety-critical) in the inquiry lets us propose the pin type, fit and documentation set that matches the duty instead of the cheapest nominal diameter.

Quality assurance & delivery terms

Full batch traceability from raw material to finished product. Every shipment leaves with documented inspection results, so what you approve in sampling is what arrives in production.

Certifications

  • ISO 9001:2015
  • RoHS
  • REACH

Documents with every order

  • Mill Test Certificate (MTC)
  • Dimensional Report
  • Salt Spray Test Report

Typical lead times

  • Standard samples: 3-5 Days
  • Bulk standard parts: 15-25 Days
  • Custom OEM parts: 30-45 Days

Manufacturing base

  • 5000 m² facility, 8 production lines
  • 50-100 employees
  • Monthly output 80-120 Tons

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Pins inquiry

  • ✓ Identify the pin type and its standard (for example parallel dowel or slotted spring pin).
  • ✓ Give nominal diameter, length and required fit/tolerance; include the mating-hole size and whether it is drilled or reamed.
  • ✓ State material, heat-treatment condition and corrosion finish, plus any specified shear or retention duty.
  • ✓ Give quantity per size, destination and inspection/certificate requirements.
  • ✓ Factory-direct pricing for your Pins
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.