Threaded Fasteners & Washers

Bolted-joint families: bolts, screws and nuts with their mating washers, to DIN, ISO, JIS, ANSI/ASME and ASTM grades.

Choosing across the bolted-joint families

A bolted joint is specified as a system, not as a single part: the bolt or screw, its nut, and the washers on both faces must agree on standard, property class and coating before anything is quoted. The practical order is to fix the joint standard first (metric per DIN and ISO, inch per ANSI/ASME, or a print-controlled ASTM grade for structural work), then the property class, and only then the surface treatment — because some coatings change the usable class or the torque the joint can carry. When you send an inquiry across families, naming the standard and class together lets us quote bolts, nuts and washers that actually mate.

Coating compatibility is the most common cross-family mismatch we see. A hot-dip galvanized bolt needs a nut whose thread clearance accepts the galvanized coating; pairing it with a fine-tolerance plated nut produces galling or an under-strength assembly. Electroplated and zinc-flake systems have different hydrogen-embrittlement behaviour on high-strength steels, so the coating choice should follow the property class rather than be added afterwards. Where a joint carries fatigue or safety relevance, the inspection documents you require (works certificate or third-party certification) should be stated in the same inquiry so the whole set ships with consistent paperwork.

Quality assurance & delivery terms

Full batch traceability from raw material to finished product. Every shipment leaves with documented inspection results, so what you approve in sampling is what arrives in production.

Certifications

  • ISO 9001:2015
  • RoHS
  • REACH

Documents with every order

  • Mill Test Certificate (MTC)
  • Dimensional Report
  • Salt Spray Test Report

Typical lead times

  • Standard samples: 3-5 Days
  • Bulk standard parts: 15-25 Days
  • Custom OEM parts: 30-45 Days

Manufacturing base

  • 5000 m² facility, 8 production lines
  • 50-100 employees
  • Monthly output 80-120 Tons

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Threaded Fasteners & Washers inquiry

  • ✓ List each part separately by family, drawing or standard designation; do not combine unlike parts under one fastener size.
  • ✓ For each item, give its nominal size, thread or plain-hole geometry, length or thickness, and the applicable dimensional series.
  • ✓ State the material or property class that applies to that part, plus the required coating or finish.
  • ✓ Identify mating components, joint conditions, quantity per item and any inspection documents required.
  • ✓ Factory-direct pricing for your Threaded Fasteners & Washers
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.