A-286 Fasteners
A-286 precipitation-hardened austenitic stainless fasteners for aerospace and high-temperature joints — -423 °F to 1200 °F service window and up to 220 ksi tensile strength in the collected NASA fastener-material table, usually produced at 160 ksi with 220 ksi on special order.
Last updated: 2026-11
Specifications
A-286 is the stainless fastener alloy the collected NASA fastener-design prose calls "the best fastener material for aerospace usage" among stainless steels: it is not susceptible to stress corrosion, and the table gives it a -423 to 1200 °F useful design temperature limit with up to 220 ksi ultimate tensile strength, passivated per MIL-S-5002. The same prose sets production expectations honestly — A286 is usually produced only up to 160-ksi strength, with 220-ksi A286 fasteners available on special order — so strength above 160 ksi is a sourcing line, not a stock assumption.
| Designation | A-286 (A286) precipitation-hardened austenitic stainless steel |
|---|---|
| Useful design temperature limit | -423 to 1200 °F (collected NASA fastener-material table, °F verbatim) |
| Ultimate tensile strength, room temperature | Up to 220 ksi (collected table, ksi verbatim); usually produced only up to 160-ksi strength, 220-ksi fasteners on special order (collected prose) |
| Surface treatment per source table | Passivated per MIL-S-5002 |
| Stress-corrosion behaviour | Not susceptible to stress corrosion (collected NASA prose; the higher-strength 180–220 ksi stainless space is otherwise filled by stress-corrosion-susceptible 17-7PH / 17-4PH) |
| Positioning vs 17-4PH / 17-7PH | A286 trades the PH-martensitic grades' stress-corrosion sensitivity for austenitic toughness across the wider -423 to 1200 °F window |
| MOQ / lead time | Not owner-confirmed for this family — confirmed at quotation |
Materials
- A-286 precipitation-hardened austenitic stainless steel
A-286 is the aerospace-proven precipitation-hardened austenitic stainless: the NASA fastener design criteria chart it passivated (per MIL-S-5002) with service from -423 to 1200 °F and strength up to 220 ksi, and rate it the best stainless fastener material for aerospace usage because it is not susceptible to stress corrosion.
The practical strength ceiling is lower than the chart maximum — A-286 is usually produced only up to 160 ksi, with 220-ksi fasteners a special-order item — so confirm the strength class and the passivation surface treatment on the certificate rather than assuming the top of the range.
Ordering & documentation
Documents
Shipments of A-286 Fasteners are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for A-286 Fasteners orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (A-286 Fasteners), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantities and lead times for a-286 fasteners are confirmed at quotation — send alloy grade, product form and size on the RFQ and the quote will carry a firm schedule; sample availability is confirmed with the quotation.
Storage & shipping
A-286 Fasteners are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store a-286 fasteners dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
A286 or 17-4PH for a high-strength stainless joint?
The collected NASA prose is direct: of the stainless steels, A286 is the best fastener material for aerospace usage because it is not susceptible to stress corrosion, while the higher-strength 180–220 ksi stainless fasteners are usually 17-7PH or 17-4PH, which are stress-corrosion susceptible. If the joint sees aggressive environment plus high strength, A286 is the collected-source answer.
Can A286 fasteners be coated?
A zinc-flake coating reference treats precipitation-hardened stainless steels including A286 as coatable and notes zinc flake is the safe choice where added protection is needed, since PH stainless hardened above 1100 MPa is susceptible to hydrogen embrittlement under electroplating. Quote your strength level and coating intent on the RFQ.
What should an RFQ for A-286 fasteners state?
State the designation (A-286), fastener type and thread sizes, strength basis (160 ksi production or 220 ksi special order per the collected source), the service temperature range, and surface treatment (passivated per MIL-S-5002 in the collected table). Commercial terms are confirmed at quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your A-286 Fasteners inquiry
- ✓ Name the exact alloy/grade and product form (bolt, stud, nut, rod or machined fastener).
- ✓ State the governing material/product specification and required heat-treatment or aging condition.
- ✓ Give thread form, nominal size, length and drawing tolerances.
- ✓ Describe operating temperature, corrosive medium, oxidation or hydrogen/sour-service exposure and design duty.
- ✓ Specify heat-lot traceability and required chemical, mechanical and inspection certificates.
- ✓ Factory-direct pricing for your A-286 Fasteners
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support