F1554 Grade 55 Anchor Bolts
ASTM F1554 Grade 55 high-strength low-alloy steel anchor bolts — 55 ksi minimum yield, 75–95 ksi tensile, 21% elongation, in diameters from 1/4" to 4".
Last updated: 2026-11
Specifications
Grade 55 is the high-strength low-alloy step up from Grade 36: 55 ksi minimum yield at 75–95 ksi tensile, specified where base-plate loads or uplift demand more than a mild-steel rod can carry while the design still wants the weldability and ductility of the lower-strength grades. Supplied straight or L-shaped (hooked), with hot-dip galvanizing available.
| Standard designation | ASTM F1554 Grade 55 |
|---|---|
| Material | High-strength low-alloy steel (modified mild steel) |
| Minimum yield strength | 55 ksi (380 MPa) |
| Tensile strength | 75–95 ksi |
| Elongation (2 in) | 21% |
| Diameter range | 1/4" – 4" |
| Form | Straight rod or L-shaped (hook) |
| Coating | Hot-dip galvanizing, zinc plated (blue/yellow), Geomet, Dacromet |
| Marking | Grade color code on the unthreaded end |
| Grade | Field | Recorded value |
|---|---|---|
| ASTM F1554 55 | Nominal size range | 1/4 in to 2 in; 2-1/4 in to 2-1/2 in; 2-3/4 in to 3 in; 3-3/4 in to 4 in |
| ASTM F1554 55 | Strength grade | ASTM F1554 Grade 55 — tensile 75 ksi min / 95 ksi max; segmented size range 1/4 in to 4 in (2″–2-1/4″, 2-1/2″–2-3/4″, 3″–3-3/4″ gaps) |
| ASTM F1554 55 | Strength grade | ASTM F1554 Grade 55 anchor bolts — yield min 55 ksi; tensile 75 ksi min / 95 ksi max; size range 1/4 in to 4 in |
Industry reference — figures as printed in the collected technical tables; availability confirmed per quotation.
Materials
- High-strength low-alloy steel
High-strength low-alloy steel, supplied as-rolled or normalized — 55 ksi minimum yield with 75–95 ksi tensile, the middle rung of the F1554 ladder between the mild Grade 36 and the heat-treated Grade 105.
Weldability is not automatic. Grade 55 must meet the requirements of supplement S1 of the ASTM F1554 specification in order to be certified as weldable — S1 controls chemical composition and carbon equivalent for that purpose. A standard Grade 55 should not be welded merely because it has a lower yield strength than Grade 105; when the design requires field welding, order Grade 55 with S1 called out in the purchase order.
The substitution ladder runs one way: a weldable (S1) Grade 55 may stand in for a specified Grade 36, but there is no equivalent allowance that turns a plain Grade 55 lot into a weldable one after the fact — weldability comes from the order chemistry, not from re-grading later.
What this page cannot verify: whether a given lot carries S1. The supplement applies only when it is specified in the purchase order, so weldability has to be confirmed from the order documents and the mill certificate — the grade marking on the end does not carry S1.
Ordering & documentation
Documents
Shipments of F1554 Grade 55 Anchor Bolts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for F1554 Grade 55 Anchor Bolts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (F1554 Grade 55 Anchor Bolts), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for f1554 grade 55 anchor bolts is 500–1,000 pieces (applies to the standard sizes and finishes for f1554 grade 55 anchor bolts; mixed, special or custom variants are quoted — final commercial terms per quotation) Standard production for f1554 grade 55 anchor bolts run 15–30 days. Quantities or variants of f1554 grade 55 anchor bolts outside the standard range are confirmed at quotation.
Storage & shipping
F1554 Grade 55 Anchor Bolts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store f1554 grade 55 anchor bolts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
When does a design move from Grade 36 to Grade 55?
The grade follows the structural design: Grade 55 carries roughly half again the minimum yield of Grade 36 (55 ksi vs 36 ksi) with 75–95 ksi tensile, so engineers specify it where column-base uplift, shear or moment loads exceed what a mild-steel rod is rated for. Order the grade the engineer of record specified — substituting a grade is not a purchasing decision.
What is the MOQ and lead time for this grade?
The minimum order quantity is 500–1,000 pieces. Standard production runs 15–30 days. Bent or custom hook geometries are quoted against the drawing.
What should an RFQ for this grade state?
State the grade, diameter and thread callout (for example 1"-8 UNC), overall length and thread length, hook or straight-rod geometry, coating, and quantity per size — plus destination country and any required documents such as a mill test certificate. Thread and hook lengths differ by supplier and diameter, so read them from your drawing rather than a generic chart.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your F1554 Grade 55 Anchor Bolts inquiry
- ✓ This listed family is cast-in foundation anchor rods, including L-shaped/bent rods; identify the ASTM F1554 grade or drawing.
- ✓ Give rod diameter/thread, overall length, hook length, projection and thread length as separate dimensions.
- ✓ Provide the supported base plate/structure details and the concrete design inputs, embedment, edge distance and spacing from the engineer’s design.
- ✓ State corrosion protection, quantity, destination and required material/lot certificates.
- ✓ Factory-direct pricing for your F1554 Grade 55 Anchor Bolts
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support