ASTM F1136 Zinc/Aluminum Protective Coatings (Withdrawn 2025)

ASTM F1136/F1136M — Zinc/Aluminum Corrosion Protective Coatings for fasteners. The coating standard cited by structural bolting specifications before 2025; withdrawn in 2025 and replaced by ASTM F3393. Grade 3, the chromate-free grade, carried a 720-hour minimum salt-spray requirement closely equivalent to ISO 10683.

Last updated: 2026-11

Request a Quote

ASTM F1136 Zinc/Aluminum Protective Coatings (Withdrawn 2025) in an industrial setting
Illustrative image redrawn from real ASTM F1136 Zinc/Aluminum Protective Coatings (Withdrawn 2025) product references — not a photograph of stocked items.

Specifications

ASTM F1136/F1136M specified zinc/aluminum corrosion-protective coatings for fasteners and was the standard behind non-chrome zinc-flake callouts on high-strength structural bolts — the classic case being its Grade 3 non-chrome (GEOMET 321-type) systems qualified for use with ASTM A490 bolts, where plating was prohibited on hydrogen-embrittlement grounds. The standard was withdrawn in 2025: the RCSC Specification's 2025 edition commentary records that ASTM F3393, Zinc-Flake Coating Systems for Fasteners, replaced the three coating standards its prior editions cited — F1136, F2833 and F3019 — with the transition documented in F3393 Appendix X.1. Parts coated to F1136 remain in the supply chain under older drawings, so the page documents what the designation meant and how it maps forward; new callouts should specify F3393 with the classification the joint expects.

Standard ASTM F1136/F1136M-11(2019) — Zinc/Aluminum Corrosion Protective Coatings (fasteners)
Status Withdrawn 2025; replaced by ASTM F3393 per RCSC 2025 edition commentary (see F3393 Appendix X.1)
Grade 3 (chromate-free) Minimum 720 h salt spray, chromate-free — closely equivalent to ISO 10683; test methods differ slightly, so substitution needs customer confirmation and documentation
Historic structural use Non-chrome Grade 3 systems (e.g. GEOMET 321) qualified for use with ASTM A490 high-strength structural bolts — boltcouncil qualification-study title
Prior-edition citation Cited by earlier editions of the RCSC Specification alongside ASTM F2833 and ASTM F3019 until the 2025 edition consolidated on F3393
Substitution discipline A drawing callout needs friction class, mating condition and sealer requirements to hold installation torque — carry these into any F3393 re-callout

Materials

  • High-strength carbon steel fasteners (historic A490 qualification use)
  • Alloy steel fasteners where electroplating was prohibited
  • Fasteners under legacy drawings specifying F1136 Grade 3

Ordering & documentation

Documents

Shipments of ASTM F1136 Zinc/Aluminum Protective Coatings (Withdrawn 2025) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASTM F1136 Zinc/Aluminum Protective Coatings (Withdrawn 2025) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ASTM F1136 Zinc/Aluminum Protective Coatings (Withdrawn 2025)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for astm f1136 zinc/aluminum protective coatings (withdrawn 2025) is per batch, carried with the fastener order (applies to the standard sizes and finishes for astm f1136 zinc/aluminum protective coatings (withdrawn 2025); mixed, special or custom variants are quoted — final commercial terms per quotation) Finishing for astm f1136 zinc/aluminum protective coatings (withdrawn 2025) run adds 5–10 days to the fastener lead time. Quantities or variants of astm f1136 zinc/aluminum protective coatings (withdrawn 2025) outside the standard range are confirmed at quotation.

Storage & shipping

Coated parts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store finished fasteners dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Is ASTM F1136 still a valid callout for new work?

No. The standard was withdrawn in 2025, and the RCSC Specification's 2025 edition — the controlling document for high-strength structural joints — now cites ASTM F3393 in its place, with F1136 named among the three replaced coating standards. Coated inventory to F1136 can still fulfill older drawings, but new callouts and new qualifications should specify F3393 with the corrosion, appearance and friction classification the joint expects. If your customer insists on F1136 wording, the honest path is a documented substitution to the equivalent F3393 class.

What did F1136 Grade 3 actually specify?

Grade 3 was the chromate-free grade: a minimum 720-hour salt-spray performance with no chromium-based passivate, which made it the zinc-flake system qualified for A490 high-strength bolts — where plating risked hydrogen embrittlement and hexavalent-chrome passivates were excluded. Its performance class is closely equivalent to ISO 10683, but the test methods differ slightly, so the substitution was always documented rather than assumed — name the standard, grade and friction requirements, and confirm the equivalence with the customer in writing.

What is the MOQ and lead time for this finish?

Finishing runs per batch carried with the fastener order and adds 5–10 days to the fastener lead time. Coated parts follow the finish line that processes them, so confirm the exact schedule against quantity and finish class at quotation.

What should an RFQ for this finish state?

State the base fastener (grade, diameter, length), the coating standard and class (for example ASTM B841 Class 2 with black trivalent passivate, or ISO 10683 with a specified topcoat), any thickness or salt-spray requirement, lubrication or torque-tension needs, and quantity per size — plus destination country and required documents such as a mill test certificate.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ASTM F1136 Zinc/Aluminum Protective Coatings (Withdrawn 2025) inquiry

  • ✓ Identify the base fastener material/grade and substrate condition before coating.
  • ✓ Name the coating process and governing specification, with required coating thickness and any post-treatment.
  • ✓ Define corrosion acceptance explicitly: test method, exposure duration, and whether white corrosion or red rust is the rejection criterion.
  • ✓ State any friction-coefficient, torque-tension, temperature or hydrogen-embrittlement controls relevant to the joint.
  • ✓ Factory-direct pricing for your ASTM F1136 Zinc/Aluminum Protective Coatings (Withdrawn 2025)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.