Cadmium Electroplate

Cadmium electroplate per AMS QQ-P-416 — the smooth, high-lubricity legacy finish that torques more consistently than zinc, now largely confined to military-legacy callouts at a reported cost above four times zinc.

Last updated: 2026-11

Request a Quote

Cadmium Electroplate in an industrial setting
Illustrative image redrawn from real Cadmium Electroplate product references — not a photograph of stocked items.

Specifications

Cadmium electroplate is produced by the same electrolytic process as zinc, on a metal that gives the coating two properties buyers used to value: a smooth surface with lubricity above plain steel, and more consistent torque-tension behavior than zinc at equal thickness. Toxicity ended that — cad has been virtually eliminated from commercial products and from new military design, and as platers dropped the line the reported price climbed to more than four times zinc. What survives is the legacy spec base: AMS QQ-P-416 Type II Class 2 (0.0003″) with yellow dichromate is the callout still received, alongside ASTM F1941 FE/CD. Specify cad only where an existing platform or military-legacy drawing demands it; new designs take zinc-nickel, which was developed to replace it.

Process Electroplating — same deposition process as zinc electroplate, cadmium metal
Reference standards AMS QQ-P-416 (Type II CL2, 0.0003″, yellow dichromate) and ASTM F1941 (FE/CD 8C)
Corrosion resistance 72–168 h neutral salt spray by specification — AMS QQ-P-416 Type II CL2: 96 h; F1941-17 FE/CD 8C: 72 h
Lubricity Smooth surface, increased lubricity vs plain steel — parts coated to QQ-P-416 torque more consistently than zinc per ASTM B633
Hydrogen embrittlement Electroplated process — high-strength hardened parts baked after plating
Status Virtually eliminated from commercial products and new military design (toxicity); remaining use is legacy-spec replacement
Relative cost More than four times zinc and rising — many platers no longer offer the line (reported plating-shop comparison)
Salt spray (NSS) — AMS QQ-P-416 Type II CL2 96 h — Yellow
Salt spray (NSS) — ASTM F1941-17 FE/CD 8C 72 h — Yellow

Materials

  • Carbon steel fasteners (legacy specs)
  • High-strength steel fasteners (baked after plating)

Ordering & documentation

Documents

Shipments of Cadmium Electroplate are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Cadmium Electroplate orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (Cadmium Electroplate), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for cadmium electroplate is per batch, carried with the fastener order (applies to the standard sizes and finishes for cadmium electroplate; mixed, special or custom variants are quoted — final commercial terms per quotation) Finishing for cadmium electroplate run adds 5–10 days to the fastener lead time. Quantities or variants of cadmium electroplate outside the standard range are confirmed at quotation.

Storage & shipping

Coated parts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store finished fasteners dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Should a new design specify cadmium?

Almost never. Cadmium's toxicity has removed it from commercial products and new military design, availability is shrinking, and the reported price runs above four times zinc. Its genuine advantages — smooth finish, high lubricity, consistent torque-tension — are what zinc-nickel plating was engineered to preserve in a compliant system, and zinc-nickel also carries several times the salt-spray life. Specify cad only to service an existing platform whose drawing still calls it out, and expect sourcing to be the long pole in the schedule.

What is the MOQ and lead time for this finish?

Finishing runs per batch carried with the fastener order and adds 5–10 days to the fastener lead time. Coated parts follow the finish line that processes them, so confirm the exact schedule against quantity and finish class at quotation.

What should an RFQ for this finish state?

State the base fastener (grade, diameter, length), the coating standard and class (or the process plus thickness/color requirement where no standard callout exists), any salt-spray or friction requirement, and quantity per size — plus destination country and required documents such as a mill test certificate.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Cadmium Electroplate inquiry

  • ✓ Identify the base fastener material/grade and substrate condition before coating.
  • ✓ Name the coating process and governing specification, with required coating thickness and any post-treatment.
  • ✓ Define corrosion acceptance explicitly: test method, exposure duration, and whether white corrosion or red rust is the rejection criterion.
  • ✓ State any friction-coefficient, torque-tension, temperature or hydrogen-embrittlement controls relevant to the joint.
  • ✓ Factory-direct pricing for your Cadmium Electroplate
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.