External Shaft Rings, Poodle Style
Poodle-style external retaining rings for shafts — heavy-arc rings whose looped lug gives a deep plier grip for large shafts — with the collected 11-size table (rings 15 to 125): d2, d3, s, dg, b, d1, m, n and the source’s six supplementary columns.
Last updated: 2026-11
Specifications
The poodle-style ring is an external retaining ring named for its looped, poodle-head lug: a heavy open arc with a formed eye that gives pliers a deep, positive grip on large-diameter shafts. It serves where a standard circlip is awkward to compress at size — the loop gives the tool purchase without the ring’s section giving way. The collected table lists rings 15 through 125 — 11 sizes — with groove-side geometry (d2 with per-size tolerance, d3 reference, s, dg, b, d1, m with tolerance, n min.) plus six supplementary columns under their printed labels. The collected page header prints "All measurements in millimeters (mm)", yet the value scale and the ring numbering follow the imperial retaining-ring convention; every figure below is reproduced exactly as printed and the unit question should be confirmed at quotation.
| Type | External shaft rings, poodle style (collected table covers rings 15–125) |
|---|---|
| Working principle | Heavy-arc external ring with a looped lug for deep plier engagement on large shafts |
| Units note | Collected header prints millimeters while the value scale follows the imperial series convention — figures rendered as printed; confirm at quotation |
| Column labels | FN Lbr. / Fs Lbr. / g / Fsg Lib. / nabl min. / lbs reproduced as printed — the collected table carries no unit legend |
| Row, ring 1 | ring 15 | d2 0.120 +0.004/-0.004 | d3 ref. 0.320 | s 0.035 +0.002/-0.002 | dg 0.110 +0.003/-0.003 | b 0.042 | d1 0.156 | m 0.039 +0.006/-0.000 | n min. 0.036 | FN Lbr. 110 | Fs Lbr. 457 | g 0.040 | Fsg Lib. 250 | nabl min. 80000 | lbs 0.418 |
| Row, ring 2 | ring 18 | d2 0.148 +0.005/-0.005 | d3 ref. 0.400 | s 0.035 +0.002/-0.002 | dg 0.140 +0.003/-0.003 | b 0.048 | d1 0.188 | m 0.039 +0.006/-0.000 | n min. 0.040 | FN Lbr. 130 | Fs Lbr. 609 | g 0.040 | Fsg Lib. 270 | nabl min. 80000 | lbs 0.594 |
| Row, ring 3 | ring 25 | d2 0.210 +0.006/-0.006 | d3 ref. 0.482 | s 0.035 +0.002/-0.002 | dg 0.188 +0.003/-0.003 | b 0.058 | d1 0.250 | m 0.039 +0.006/-0.000 | n min. 0.040 | FN Lbr. 200 | Fs Lbr. 914 | g 0.040 | Fsg Lib. 310 | nabl min. 65000 | lbs 0.878 |
| Row, ring 4 | ring 31 | d2 0.272 +0.006/-0.006 | d3 ref. 0.588 | s 0.042 +0.002/-0.002 | dg 0.250 +0.003/-0.003 | b 0.074 | d1 0.312 | m 0.046 +0.006/-0.000 | n min. 0.040 | FN Lbr. 250 | Fs Lbr. 1320 | g 0.050 | Fsg Lib. 400 | nabl min. 65000 | lbs 1.518 |
| Row, ring 5 | ring 37 | d2 0.331 +0.006/-0.006 | d3 ref. 0.680 | s 0.042 +0.002/-0.002 | dg 0.312 +0.004/-0.004 | b 0.081 | d1 0.375 | m 0.046 +0.006/-0.000 | n min. 0.044 | FN Lbr. 300 | Fs Lbr. 1573 | g 0.050 | Fsg Lib. 430 | nabl min. 65000 | lbs 2.002 |
| Row, ring 6 | ring 43 | d2 0.390 +0.008/-0.008 | d3 ref. 0.752 | s 0.050 +0.002/-0.002 | dg 0.375 +0.004/-0.004 | b 0.081 | d1 0.438 | m 0.056 +0.006/-0.000 | n min. 0.048 | FN Lbr. 400 | Fs Lbr. 2233 | g 0.060 | Fsg Lib. 600 | nabl min. 60000 | lbs 2.684 |
| Row, ring 7 | ring 50 | d2 0.440 +0.008/-0.008 | d3 ref. 0.826 | s 0.050 +0.002/-0.002 | dg 0.406 +0.004/-0.004 | b 0.097 | d1 0.500 | m 0.056 +0.006/-0.000 | n min. 0.060 | FN Lbr. 600 | Fs Lbr. 2538 | g 0.060 | Fsg Lib. 630 | nabl min. 50000 | lbs 3.322 |
| Row, ring 8 | ring 62 | d2 0.531 +0.008/-0.008 | d3 ref. 0.966 | s 0.050 +0.002/-0.002 | dg 0.500 +0.005/-0.005 | b 0.086 | d1 0.625 | m 0.056 +0.006/-0.000 | n min. 0.094 | FN Lbr. 1100 | Fs Lbr. 3045 | g 0.060 | Fsg Lib. 720 | nabl min. 45000 | lbs 3.322 |
| Row, ring 9 | ring 75 | d2 0.632 +0.010/-0.010 | d3 ref. 1.095 | s 0.062 +0.003/-0.003 | dg 0.594 +0.005/-0.005 | b 0.095 | d1 0.750 | m 0.068 +0.008/-0.000 | n min. 0.118 | FN Lbr. 1600 | Fs Lbr. 4669 | g 0.065 | Fsg Lib. 1000 | nabl min. 38000 | lbs 6.688 |
| Row, ring 10 | ring 100 | d2 0.860 +0.010/-0.010 | d3 ref. 1.415 | s 0.078 +0.003/-0.003 | dg 0.812 +0.006/-0.006 | b 0.113 | d1 1.000 | m 0.086 +0.008/-0.000 | n min. 0.140 | FN Lbr. 2600 | Fs Lbr. 7613 | g 0.065 | Fsg Lib. 1800 | nabl min. 25000 | lbs 13.024 |
| Row, ring 11 | ring 125 | d2 1.090 +0.010/-0.010 | d3 ref. 1.800 | s 0.093 +0.003/-0.003 | dg 1.032 +0.006/-0.006 | b 0.180 | d1 1.250 | m 0.103 +0.008/-0.000 | n min. 0.160 | FN Lbr. 3500 | Fs Lbr. 11165 | g 0.065 | Fsg Lib. 2750 | nabl min. 11000 | lbs 25.498 |
| Materials / finish | Not printed by the collected specification — per RFQ |
| MOQ / lead time | Not owner-confirmed for this family — confirmed at quotation |
- Unit conflict (source-level, verified against the collected page): the source header prints "All measurements in millimeters (mm)" while every value follows the imperial retaining-ring convention — the decimal-inch value scale, the ring-numbering ladder and the supplementary load columns match the inch-series ring tables elsewhere in the same source programme. All figures are reproduced exactly as printed with no conversion; treat the dimensional columns as inch values and confirm units at quotation.
Materials
- Not printed by the collected specification — per RFQ
Ordering & documentation
Documents
Shipments of External Shaft Rings, Poodle Style are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for External Shaft Rings, Poodle Style orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (External Shaft Rings, Poodle Style), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantities and lead times for external shaft rings, poodle style are confirmed at quotation — send ring type, shaft or housing diameter and groove dimensions on the RFQ and the quote will carry a firm schedule; sample availability is confirmed with the quotation.
Storage & shipping
External Shaft Rings, Poodle Style are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store external shaft rings, poodle style dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
What does the poodle-style lug change in practice?
Handling at size. On large shafts a conventional circlip is hard to compress evenly — the pliers slip or the ring springs — while the looped lug gives the tool a positive, deep grip, so installation stays controlled. The trade is a lug envelope that stands further off the shaft than a standard ring: check the m and n min. columns against adjacent parts before choosing it. Beyond the lug, selection works like any external ring — size by shaft diameter against the collected table’s d2 groove column.
Which documents can I request with an order of External Shaft Rings, Poodle Style?
Orders can be documented with a mill test certificate (MTC), a dimensional report and a salt spray test report, with full batch traceability from raw material to finished product; availability of each document for this designation is confirmed at quotation.
What should an RFQ for External Shaft Rings, Poodle Style state?
State the full designation (External Shaft Rings, Poodle Style), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your External Shaft Rings, Poodle Style inquiry
- ✓ Identify external shaft rings (for example DIN 471) or internal bore rings (for example DIN 472), plus ring type.
- ✓ Give nominal shaft or housing-bore diameter and the groove diameter, width and tolerances.
- ✓ State ring material, heat treatment and finish for the service environment.
- ✓ Describe axial load, rotational speed, assembly access/pliers and quantity per size.
- ✓ Factory-direct pricing for your External Shaft Rings, Poodle Style
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support