FH & FHS Self-Clinching Threaded Studs

Self-clinching threaded studs, FH (carbon steel), FHS (stainless steel) and FHA (aluminum) — permanently mounted external threads for thin sheet, metric M2.5 to M8, with controlled clinching holes within 0.08 mm of nominal and minimum sheet thicknesses 1.0–2.4 mm by size.

Last updated: 2026-11

Request a Quote

FH & FHS Self-Clinching Threaded Studs in an industrial setting
Illustrative image redrawn from real FH & FHS Self-Clinching Threaded Studs product references — not a photograph of stocked items.

Specifications

An FH, FHS or FHA self-clinching stud provides a permanently mounted external thread in thin sheet metal: the stud is pressed into a controlled clinching hole and the sheet material cold-flows around the knurled shank, locking the stud in place — no welding, no through-hole. FH is the carbon-steel series, FHS the stainless-steel series, and FHA the aluminum series. A typical designation reads FH-M4-10: an FH carbon-steel stud with an M4 x 0.7 external thread and a 10 mm nominal length. The collected installation table runs metric M2.5 x 0.45 through M8 x 1.25, each with its minimum sheet thickness (1.0 to 2.4 mm), mounting-hole diameter (within +0.08/0 of the nominal thread size), clinch-head diameter H (4.1 to 9.6 mm), maximum unthreaded length F, and minimum edge distance. The mounting hole is a controlled clinching hole even though its diameter sits close to the nominal thread size — a standard bolt clearance hole must not be substituted.

Series FH (carbon steel), FHS (stainless steel) and FHA (aluminum) — externally threaded self-clinching studs
Series-to-sheet fit FH is the general-purpose stud for steel or aluminum sheets up to HRB 80 / HB 150; FHS for sheets up to HRB 70 / HB 125; FHA (aluminum stud) is recommended for aluminum sheets up to HRB 50 / HB 82 — match the stud material to the sheet hardness, not just the thread size
Thread range M2.5 x 0.45, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25 — external threads. In the collected metric table the aluminum FHA series runs M2.5 to M6; the M8 row lists FH and FHS only
Thread range M2.5 x 0.45, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25 — external threads
Minimum sheet thickness (by size) 1.0 mm (M2.5–M5); 1.6 mm (M6); 2.4 mm (M8)
Mounting hole (by size) Ø2.50, 3.00, 4.00, 5.00, 6.00, 8.00 mm — each +0.08/0 (a controlled clinching hole, not a clearance hole)
Clinch-head diameter H (by size) 4.1, 4.6, 5.9, 6.5, 8.2, 9.6 mm (M2.5 → M8)
Unthreaded length F, maximum (by size) 1.95, 2.10, 2.40, 2.70, 3.00, 3.70 mm (M2.5 → M8) — F provides no complete thread engagement, so deduct it when calculating usable thread length
Minimum edge distance (by size) 5.4, 5.6, 7.2, 7.2, 7.9, 9.6 mm (M2.5 → M8)
Designation FH-M4-10 = FH carbon-steel stud, M4 x 0.7 external thread, 10 mm nominal length
MOQ / lead time Not owner-confirmed for this family — confirmed at quotation

Materials

  • Carbon steel (FH series)
  • Stainless steel (FHS series)
  • Aluminum (FHA series)

Ordering & documentation

Documents

Shipments of FH & FHS Self-Clinching Threaded Studs are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for FH & FHS Self-Clinching Threaded Studs orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (FH & FHS Self-Clinching Threaded Studs), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantities and lead times for fh & fhs self-clinching threaded studs are confirmed at quotation — send series, thread size and parent sheet thickness on the RFQ and the quote will carry a firm schedule; sample availability is confirmed with the quotation.

Storage & shipping

FH & FHS Self-Clinching Threaded Studs are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store fh & fhs self-clinching threaded studs dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

When should I pick the aluminum FHA stud instead of FH or FHS?

Match the stud material to the sheet. The FHA aluminum stud is recommended for aluminum sheets up to HRB 50 / HB 82 — harder aluminum sheets should take the FHS stainless stud (up to HRB 70 / HB 125) or the FH carbon-steel stud (up to HRB 80 / HB 150), because a soft aluminum stud cannot cold-flow a harder sheet reliably. In the collected metric table FHA runs M2.5 through M6; M8 is listed in FH and FHS only, so an M8 stud in a soft aluminum sheet needs confirmation at quotation.

Why can't I drill a normal clearance hole for a self-clinching stud?

The clinch head locks by cold-flowing the sheet material into the shank geometry, which only works if the hole is the controlled clinching size from the installation table — within +0.08/0 of the nominal thread diameter (for example Ø4.00 +0.08/0 for M4). A standard bolt clearance hole is larger and leaves nothing for the sheet to flow into, so the stud would spin or pull out. Drill the clinching hole, not a clearance hole.

How much thread length does an FH stud actually give me?

The nominal length L includes the unthreaded region F next to the clinch head, which does not provide complete thread engagement. The collected table lists F maximum per size — 2.40 mm at M4, 3.00 mm at M6, 3.70 mm at M8. Usable full-engagement thread is roughly L minus F; when that matters for the assembly, state the required minimum full-thread length on the drawing and confirm it at quotation.

What should an RFQ for these self-clinching standoffs or studs state?

State the series (FH/FHS stud, SO/SOS/SOA through-hole standoff, or BSO/BSOS/BSOA blind standoff), thread size and pitch (for example M4 x 0.7), nominal length L, sheet material and thickness, and — for blind standoffs — the required effective thread depth and the maximum permitted screw penetration. Quantity per size and destination country complete the RFQ. Commercial terms are confirmed at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your FH & FHS Self-Clinching Threaded Studs inquiry

  • ✓ Identify the clinch-nut, stud or standoff series and the internal thread size.
  • ✓ Specify parent-sheet material, hardness and actual thickness, not gauge alone.
  • ✓ Provide prepared-hole diameter, edge distance and hole-to-hole spacing from the panel drawing.
  • ✓ State locking/non-locking requirement, installation press/tooling and any push-out or torque-out acceptance data.
  • ✓ Factory-direct pricing for your FH & FHS Self-Clinching Threaded Studs
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.