Series SH Hard Panel Self-Clinching Nuts

Hardened alloy-steel self-clinching nuts for high-strength steel panels up to 975 MPa tensile strength — a hardened nut body that keeps the installed thread strong where a standard clinch nut would be out-rated by the sheet. 1/4-20 to 3/8-16 unified, M6 to M10 metric.

Last updated: 2026-11

Request a Quote

Series SH Hard Panel Self-Clinching Nuts in an industrial setting
Illustrative image redrawn from real Series SH Hard Panel Self-Clinching Nuts product references — not a photograph of stocked items.

Specifications

Series SH exists for the panels that defeat ordinary clinch nuts: high-strength steel sheet up to 975 MPa tensile strength. The nut body itself is hardened alloy steel, so the installed thread keeps its strength rating instead of being the soft spot in a hard panel — and the installation practice is unchanged: punch the tabulated hole, press with parallel punch and anvil, and let the sheet cold-flow into the shank groove. The collected catalog tabulates unified 1/4-20, 5/16-18 and 3/8-16 and metric M6 x 1, M8 x 1.25 and M10 x 1.5, each in two shank lengths with the matching minimum sheet thickness, mounting-hole and head dimensions. One catalog note worth knowing before machining: due to the manufacturing procedure, parts may have a counterbore at the shank end. Where the sheet is hardened but smaller than 1/4-20, this series is the starting point rather than the standard S line.

Series SH — hardened alloy steel hard panel nut
Panel envelope High-strength steel sheets up to 975 MPa tensile strength
Thread range (unified) 1/4-20, 5/16-18, 3/8-16
Thread range (metric) M6 x 1, M8 x 1.25, M10 x 1.5
Hole size, sampled (max / min) 1/4-20: 0.344 / 0.343 in. · M6: 8.75 / 8.73 mm · M10: 14.0 / 13.97 mm
Head C / E / T, sampled 1/4-20: 0.440 in. C max / 0.170 in. E max / 0.34 in. edge distance · M10: 17.35 / 7.48 / 13.5 mm
Shank length A vs min sheet, sampled 1/4-20: 0.054 in. shank into 0.056 in. sheet (code 1) / 0.087 into 0.090 (code 2); M10: 2.21 mm into 2.29 mm sheet (code 2)
Manufacturing note Parts may have a counterbore at the shank end (per the collected catalog)
Performance (sampled, .098 in. / 2.5 mm S700MC sheet, HRC 23) 5/16-18 (shank code 1): 12600 lbs installation, 1050 lbs pushout, 265 in.-lbs torque-out (code 2: 12900 / 1100 / 265); M8: 56.1 kN, 4600 N, 30 N·m (collected CL performance table, batch x85 — the sheet condition is a high-strength S700MC steel, not cold-rolled)
MOQ / lead time Not owner-confirmed for this family — confirmed at quotation
SH hard panel nuts - performance data, unified sizes (.098 in. S700MC test sheet, HRC 23)Values as printed in the collected CL self-clinching performance data (installation force, pushout, torque-out); "collected" wording covers the tenant-internal provenance, which is not rendered. Pushout is tested from the grip side, torque-out from the head side, per the same bulletin. The sheet condition is a high-strength S700MC steel, not cold-rolled — SH performance is printed only for this hard-panel basis.
Thread codeShank codeInstallation force (lbs)Pushout (lbs)Torque-out (in.-lbs)
1/4-20 (.250-20)111700950150
1/4-20 (.250-20)2129001000170
5/16-18 (.313-18)1126001050265
5/16-18 (.313-18)2129001100265
3/8-16 (.375-16)1153001200500
SH hard panel nuts - performance data, metric sizes (2.5 mm S700MC test sheet, HRC 23)Values as printed in the collected CL self-clinching performance data (installation force, pushout, torque-out); "collected" wording covers the tenant-internal provenance, which is not rendered. Pushout is tested from the grip side, torque-out from the head side, per the same bulletin.
ThreadShank codeInstallation force (kN)Pushout (N)Torque-out (N·m)
M6 x 1152.1420017
M6 x 1257.4450019
M8 x 1.25156.1460030
M8 x 1.25257.4490030
M10 x 1.5171.2540056

Materials

  • Hardened alloy steel

Ordering & documentation

Documents

Shipments of Series SH Hard Panel Self-Clinching Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Series SH Hard Panel Self-Clinching Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (Series SH Hard Panel Self-Clinching Nuts), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantities and lead times for series sh hard panel self-clinching nuts are confirmed at quotation — send series, thread size and parent sheet thickness on the RFQ and the quote will carry a firm schedule; sample availability is confirmed with the quotation.

Storage & shipping

Series SH Hard Panel Self-Clinching Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store series sh hard panel self-clinching nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why a special series for hard panels — what fails with a standard clinch nut?

Two things. Clinching works by cold-flowing the sheet into the nut's groove; a sheet at the top of the hardness range resists that flow, so retention drops exactly where the joint is most demanding. And a soft nut body in a high-strength assembly makes the installed thread the weakest link. The SH series answers both: a hardened alloy-steel body keeps the thread strong, and the series is rated by the collected catalog for high-strength steel sheets up to 975 MPa tensile strength — far beyond the HRB-80-ish ceiling of the standard S line.

What should an RFQ for these self-clinching nuts state?

State the series (self-locking CFE/CFEO or non-locking CFEX/CFEOX), thread size and pitch (for example #10-32, 1/4-28, M4 x 0.7), sheet material and thickness, and sheet hardness where known (the collected sheet rates use in materials up to Rockwell B-70), plus quantity per size and destination country. Commercial terms are confirmed at quotation.

Which documents can I request with an order of Series SH Hard Panel Self-Clinching Nuts?

Orders can be documented with a mill test certificate (MTC), a dimensional report and a salt spray test report, with full batch traceability from raw material to finished product; availability of each document for this designation is confirmed at quotation.

What should an RFQ for Series SH Hard Panel Self-Clinching Nuts state?

State the full designation (Series SH Hard Panel Self-Clinching Nuts), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Series SH Hard Panel Self-Clinching Nuts inquiry

  • ✓ Identify the clinch-nut, stud or standoff series and the internal thread size.
  • ✓ Specify parent-sheet material, hardness and actual thickness, not gauge alone.
  • ✓ Provide prepared-hole diameter, edge distance and hole-to-hole spacing from the panel drawing.
  • ✓ State locking/non-locking requirement, installation press/tooling and any push-out or torque-out acceptance data.
  • ✓ Factory-direct pricing for your Series SH Hard Panel Self-Clinching Nuts
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.