DIN 1472 Grooved Pins, Half Length Taper Grooved

DIN 1472 grooved pins with a half-length taper groove, Φ1.5 to Φ25 — the axial-retaining wedge groove over half the shank for hinge-side assemblies — with the full collected 14-size table: diameter limits, chamfer, 70° taper angle, the source's minimum double-shear row and groove-diameter ranges.

Last updated: 2026-11

Request a Quote

DIN 1472 Grooved Pins, Half Length Taper Grooved in an industrial setting
Illustrative image redrawn from real DIN 1472 Grooved Pins, Half Length Taper Grooved product references — not a photograph of stocked items.

Specifications

DIN 1472 takes the full-length taper groove of DIN 1471 and shortens it to half the pin: the three pressed grooves wedge along the grooved half only, giving strong resistance to axial push-out where the pin is loaded, while the plain half shanks freely through the second member. It suits the same hinge-knuckle, lever and handle work as DIN 1469 where the designer prefers a taper wedge to a gorge form, and like all grooved pins it presses into a plain drilled hole — no reaming, and the joint survives re-driving. The collected table covers Φ1.5 to Φ25 — 14 sizes — with diameter limits (max / min), chamfer c ≈, the included taper angle α printed by the source as 70° (± 3°), the source's minimum double-shear values in kilonewtons, and its per-size groove-diameter range d 2. Lengths, materials and finishes are not printed by the collected specification and stay per RFQ. For the full-length taper form see DIN 1471 on this site.

Standard DIN 1472 — grooved pins, half length taper grooved (three-groove press-fit pin for drilled holes)
Size range Nominal diameters Φ1.5 – Φ25 (14 sizes tabulated); length to order
Tabulated geometry Per size: pin diameter d (max / min), chamfer c ≈, included taper angle α ± 3° (70°), groove diameter range d 2
Strength (source rows) Minimum double shear in kN per size, as printed by the source — 1.6 kN at Φ1.5 rising to 370.1 kN at Φ25
Function Half-shank taper wedge: axial retention in the grooved half, plain bearing half through the second member
Materials / strength Not tabulated by the collected specification beyond the source shear rows — per RFQ
DIN 1472 grooved pins, half length taper grooved - per-size dimensions (Φ1.5 - Φ25)All dimensions in millimeters. d = pin diameter (max = nominal size / min); c ≈ = chamfer; α (± 3°) = included taper angle as printed by the source; d 2 = groove diameter range as printed by the source. Minimum double shear (kN) = the source's strength row, reproduced as printed. Lengths, materials, hardness and finishes are not tabulated by the collected specification.
Sized — max=nominal sized — minc — ≈α (± 3°)Minimum double shear (kN)Groove diameter range d 2
Φ1.51.51.4750.270°1.61.60-1.63
Φ221.9750.2570°2.852.10-2.15
Φ2.52.52.4750.370°4.252.60-2.70
Φ332.9750.470°6.153.20-3.30
Φ443.9250.570°10.64.15-4.30
Φ554.9250.670°16.55.15-5.30
Φ665.9250.870°22.86.15-6.35
Φ887.91170°40.58.20-8.40
Φ10109.911.270°63.210.20-10.45
Φ121211.891.670°9112.25-12.50
Φ141413.891.670°12414.40-14.50
Φ161615.89270°156.816.50-16.60
Φ202019.872.570°236.520.50-20.60
Φ252524.87370°370.125.50-25.60

Materials

  • Material and finish specified per RFQ — the collected specification table covers geometry and the source's strength rows only

Ordering & documentation

Documents

Shipments of DIN 1472 Grooved Pins, Half Length Taper Grooved are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 1472 Grooved Pins, Half Length Taper Grooved orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 1472 Grooved Pins, Half Length Taper Grooved), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantities and lead times for din 1472 grooved pins, half length taper grooved are confirmed at quotation — send pin type, diameter, length and material on the RFQ and the quote will carry a firm schedule; sample availability is confirmed with the quotation.

Storage & shipping

DIN 1472 Grooved Pins, Half Length Taper Grooved are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 1472 grooved pins, half length taper grooved dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Half-length taper (DIN 1472) or full-length taper (DIN 1471)?

Ask which members the pin passes through. Where both members must be locked — a stacked assembly pressed together — the full-length DIN 1471 groove wedges along the whole bore. Where one member pivots or slides on a smooth shank, the half-length DIN 1472 keeps the wedge (and its insertion force and its groove-edge wear) out of that member. The taper wedge is the strongest of the groove forms against axial pull-out, so if the joint gets loaded along the pin axis — handles pulled, levers lifted — stay with the taper form and size it from the tabulated groove-diameter range against your drill tooling. Compare the source's minimum double-shear row to your worst-case shear load with a real safety factor before finalizing the diameter.

What is the MOQ and lead time for this pin type?

Commercial terms for this family are confirmed at quotation — state sizes, tolerance class and quantities on the RFQ for a firm schedule. Common diameters in this pin type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

Which documents can I request with an order of DIN 1472 Grooved Pins, Half Length Taper Grooved?

Orders can be documented with a mill test certificate (MTC), a dimensional report and a salt spray test report, with full batch traceability from raw material to finished product; availability of each document for this designation is confirmed at quotation.

What should an RFQ for DIN 1472 Grooved Pins, Half Length Taper Grooved state?

State the full designation (DIN 1472), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 1472 Grooved Pins, Half Length Taper Grooved inquiry

  • ✓ Identify the pin type and its standard (for example parallel dowel or slotted spring pin).
  • ✓ Give nominal diameter, length and required fit/tolerance; include the mating-hole size and whether it is drilled or reamed.
  • ✓ State material, heat-treatment condition and corrosion finish, plus any specified shear or retention duty.
  • ✓ Give quantity per size, destination and inspection/certificate requirements.
  • ✓ Factory-direct pricing for your DIN 1472 Grooved Pins, Half Length Taper Grooved
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.