ISO 8746 Round Head Grooved Pins

ISO 8746 round-head grooved pins, d1 1,4 to 20 — the grooved pin with a button head, tabulated with full head geometry (dk, k, r, c) over a 13-length groove ladder (l 3 to 40).

Last updated: 2026-11

Request a Quote

ISO 8746 Round Head Grooved Pins in an industrial setting
Illustrative image redrawn from real ISO 8746 Round Head Grooved Pins product references — not a photograph of stocked items.

Specifications

A grooved pin normally sits flush; the round-head variant gives it a bearing surface. ISO 8746 adds a button head over the grooved shank, so the pin can retain a part directly — the head clamps against the workpiece face while the grooves lock the shank in the bore, no separate washer or collar needed. The collected table covers d1 1,4 → 20 with full head geometry: head diameter dk (2,6 → 32), head height k (0,9 → 13,9), the r row (1,4 → 16,5) and the c row (0,42 → 6), plus d1 max/min per column (min. printing 1,35 → 19,8). The groove-diameter ladder runs 13 lengths from l 3 → 40 at the usual tolerance bands — a short length envelope, as befits a head-retained pin that rarely spans deep stacks. The countersunk-head counterpart (flush-mounted) is ISO 8747, also in this catalog. Material, hardness and finish are not tabulated — per RFQ.

Standard ISO 8746 — round head grooved pins
Size range d1 1,4 – 20 in the collected rows (d1 max/min per column; min. 1,35 → 19,8)
Head geometry dk 2,6 → 32; k 0,9 → 13,9; r 1,4 → 16,5; c 0,42 → 6
Length ladder l 3 – 40 (13 lengths) with groove diameter per length
Not tabulated Double-shear values, material, hardness, finish — per RFQ
Designation note ISO 8747 is the countersunk-head counterpart in this catalog — round head for retention, countersunk for flush
ISO 8746 round head - attribute rowsAll dimensions in millimetres. Column header is the source's d1 nominal series; head/shank attributes carried verbatim: dk = head diameter (max./min.), k = head height (max./min.), r = a fillet/radius row as labelled, c = a chamfer/edge row as labelled. The source prints d1 max. equal to nominal with min. offsets per column.
Row label1,41,622,53456810121620
d1 nominal1,41,622,53456810121620
max.1,41,622,53456810121620
min1,351,551,952,4252,9253,94,95,97,859,8511,815,819,8
dk max.2,633,74,65,457,259,110,814,416192532
min.2,22,63,34,24,956,758,510,213,614,917,723,730,7
k max.0,91,11,31,61,952,553,153,7557,48,410,913,9
min.0,70,91,11,41,652,252,853,454,66,57,51013
r =1,41,61,92,42,83,84,65,77,589,51316,5
c0,420,480,60,750,91,21,51,82,433,64,86
ISO 8746 round head - groove diameter ladder, lengths 3 - 40Groove diameter per pin length, in millimetres. The source's tolerance band row ('+0,05 0', '±0,05', '±0,1') applies across the d1 columns as printed: +0,05/0 for the smallest, ±0,05 for the mid series, ±0,1 from d1 12 up. Blank = length not tabulated for that d1.
l Nominall min.l max.d1 1,4d1 1,6d1 2d1 2,5d1 3d1 4d1 5d1 6d1 8d1 10d1 12d1 16d1 20
32,83,21,51,72,152,7
43,74,31,51,72,152,73,2
54,75,31,51,72,152,73,24,25
65,76,31,51,72,152,73,24,255,25
87,78,31,72,152,73,24,255,256,3
109,710,32,152,73,24,255,256,38,3
1211,612,42,73,24,255,256,38,310,35
1615,616,43,24,255,256,38,310,3512,35
2019,520,54,255,256,38,310,3512,3516,4
2524,525,55,256,38,310,3512,3516,420,5
3029,530,56,38,310,3512,3516,420,5
3534,535,58,310,3512,3516,420,5
4039,540,58,310,3512,3516,420,5

Materials

  • Material and finish specified per RFQ — headed grooved pins commonly run spring or hardened steel with the head formed after groove rolling; state whether the head must seat against a finished face at quotation, since dk/k geometry fixes the bearing area

Ordering & documentation

Documents

Shipments of ISO 8746 Round Head Grooved Pins are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 8746 Round Head Grooved Pins orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 8746 Round Head Grooved Pins), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantities and lead times for iso 8746 round head grooved pins are confirmed at quotation — send pin type, diameter, length and material on the RFQ and the quote will carry a firm schedule; sample availability is confirmed with the quotation.

Storage & shipping

ISO 8746 Round Head Grooved Pins are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 8746 round head grooved pins dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Round head (ISO 8746) or countersunk head (ISO 8747) — how do I choose the head style?

By what the pin head has to do to the surface it meets. The round head stands proud: it bears on the workpiece face and can retain an attached part directly, which makes it the pick when the head is doing clamping work — but it protrudes, so it needs housing clearance and it adds the head height k to any stack. The countersunk head (ISO 8747 in this catalog) sits flush in a countersunk bore: no protrusion, no snagging, but no bearing function either — the countersink must be machined, and the flush seat gives up the retention clamp. The collected tables differ accordingly: ISO 8746 tabulates head diameter dk (2,6 → 32), head height k (0,9 → 13,9), r and c rows; ISO 8747 carries dk and c but no k/r rows, since a flush countersunk head has no measurable standing height. Size ranges are close (d1 1,4 – 20 both), with short length ladders (l 3 – 40). Material, hardness and finish are not tabulated on either page and are quoted per RFQ.

Which documents can I request with an order of ISO 8746 Round Head Grooved Pins?

Orders can be documented with a mill test certificate (MTC), a dimensional report and a salt spray test report, with full batch traceability from raw material to finished product; availability of each document for this designation is confirmed at quotation.

What should an RFQ for ISO 8746 Round Head Grooved Pins state?

State the full designation (ISO 8746), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 8746 Round Head Grooved Pins inquiry

  • ✓ Identify the pin type and its standard (for example parallel dowel or slotted spring pin).
  • ✓ Give nominal diameter, length and required fit/tolerance; include the mating-hole size and whether it is drilled or reamed.
  • ✓ State material, heat-treatment condition and corrosion finish, plus any specified shear or retention duty.
  • ✓ Give quantity per size, destination and inspection/certificate requirements.
  • ✓ Factory-direct pricing for your ISO 8746 Round Head Grooved Pins
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.