DIN 7 / ISO 2338 Parallel Dowel Pins

Parallel dowel pins per DIN 7 / ISO 2338 — solid cylindrical pins with chamfered ends, d m6 nominal series 1–20 mm and m6/h6 fit tolerances. ISO 2338 covers unhardened steel and austenitic stainless steel pins; specify the actual material grade and hardness/condition from the drawing or manufacturer data. The friction-fit locating pin for aligned, rigid joints.

Last updated: 2026-11

Request a Quote

DIN 7 / ISO 2338 Parallel Dowel Pins in an industrial setting
Illustrative image redrawn from real DIN 7 / ISO 2338 Parallel Dowel Pins product references — not a photograph of stocked items.

Specifications

A parallel dowel pin is a solid cylindrical pin with chamfered ends used to locate and join parts by friction: the pin presses into pre-drilled holes and holds alignment through the frictional fit between pin and material, so the joint stays rigid and the assembled parts stay aligned. DIN 7 is the German designation and ISO 2338 is its corresponding international standard. ISO 2338 specifies parallel pins made from unhardened steel or austenitic stainless steel; it does not assign the ISO 898-1 bolt property-class ladder. The collected dimensional table runs the nominal diameter series d m6 from 1 to 20 mm (1, 1.2, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 16, 20), with the listed chamfer values r and c. Dowel pins are ordered by tolerance class as well as size — m6 for press fits, h6 for clearance fits — and the collected sheet carries band ladders for both classes across length ranges. Where the joint must come apart repeatedly or carry shock loads, a slotted spring pin (DIN 1481 / ISO 8752) is the complementary choice.

Standard DIN 7 — ISO equivalent ISO 2338 (parallel dowel pins)
Nominal diameter series (d, m6) 1, 1.2, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 16, 20 mm
Chamfer r (by diameter) 1.0, 1.2, 1.6, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0, 12.0, 16.0, 20.0 mm
Chamfer c (by diameter) 0.15, 0.18, 0.23, 0.30, 0.40, 0.45, 0.60, 0.75, 0.90, 1.20, 1.50, 1.80, 2.50, 3.00 mm
Tolerance classes m6 and h6, with band ladders by diameter across length ranges (l = 2–10 mm and l = 12–32 mm in the collected table); state the class your drawing names — m6 press fit, h6 clearance fit
Material and condition ISO 2338 parallel pins are specified as unhardened steel or austenitic stainless steel. State the actual material grade and hardness/condition from the drawing or manufacturer data; ISO 898-1 bolt property classes 4.6–12.9 are not applicable.
Stainless material note A1 / A2 / A4 designations appear in the collected stainless material references. Confirm the exact grade and any mechanical class against the applicable product specification; do not infer ISO 3506 fastener property classes for an ISO 2338 pin.
MOQ / lead time Not owner-confirmed for this family — confirmed at quotation

Materials

  • Unhardened steel — specify material grade and hardness/condition per drawing or manufacturer data
  • Stainless A1 (grade 303, 1.4305)
  • Stainless A2 (grade 304: 1.4301, 1.4306, 1.4303)
  • Stainless A4 (grade 316: 1.4401, 1.4404)

Ordering & documentation

Documents

Shipments of DIN 7 / ISO 2338 Parallel Dowel Pins are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 7 / ISO 2338 Parallel Dowel Pins orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 7 / ISO 2338 Parallel Dowel Pins), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantities and lead times for din 7 / iso 2338 parallel dowel pins are confirmed at quotation — send pin type, diameter, length and material on the RFQ and the quote will carry a firm schedule; sample availability is confirmed with the quotation.

Storage & shipping

DIN 7 / ISO 2338 Parallel Dowel Pins are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 7 / iso 2338 parallel dowel pins dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Dowel pin or slotted spring pin — which do I need?

A parallel dowel pin (DIN 7 / ISO 2338) is a solid pin that locates by friction fit in pre-drilled holes — the rigid choice where parts must stay precisely aligned and the joint is not meant to flex. A slotted spring pin (DIN 1481 / ISO 8752) is hollow and split along its full length: it compresses to enter the hole and springs outward against the hole wall, which holds the joint against shock and vibration. If your drawing names the standard, quote against that; if it names only "pin" and the hole size, say so on the RFQ and confirm the type before ordering.

What is the difference between m6 and h6 tolerance on DIN 7 pins?

Both are diameter tolerance classes for the pin; m6 leaves interference (press fit) with a matched hole, h6 leaves clearance. The collected specification sheet carries band ladders for both classes across the length ranges. Match the class to the drawing; where the drawing is silent, the fit intent (press vs removable) decides — confirm before ordering rather than defaulting.

What should an RFQ for these pins state?

State the pin type and standard (DIN 7 / ISO 2338 or DIN 1481 / ISO 8752), nominal diameter and length, the specified fit/tolerance (m6 or h6 for dowel pins where called out), material grade and condition or stainless group, and quantity per size — plus destination country. Do not assign an ISO 898-1 bolt property class to an ISO 2338 dowel pin. Commercial terms are confirmed at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 7 / ISO 2338 Parallel Dowel Pins inquiry

  • ✓ Identify the pin type and its standard (for example parallel dowel or slotted spring pin).
  • ✓ Give nominal diameter, length and required fit/tolerance; include the mating-hole size and whether it is drilled or reamed.
  • ✓ State material, heat-treatment condition and corrosion finish, plus any specified shear or retention duty.
  • ✓ Give quantity per size, destination and inspection/certificate requirements.
  • ✓ Factory-direct pricing for your DIN 7 / ISO 2338 Parallel Dowel Pins
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.