DIN 7343 Coiled Spring Pins (Light Duty)

DIN 7343 spring-type straight pins, coiled light-duty series, Φ0.8 to Φ16 — the 2¼-turn coiled pin that springs against the hole to take shear in drilled sheet and castings — with the full collected 16-size table: coil section thickness, as-coiled diameter limits, chamfer and the source's single and double shear minimums.

Last updated: 2026-11

Request a Quote

DIN 7343 Coiled Spring Pins (Light Duty) in an industrial setting
Illustrative image redrawn from real DIN 7343 Coiled Spring Pins (Light Duty) product references — not a photograph of stocked items.

Specifications

A coiled spring pin is a strip of spring steel rolled into roughly 2¼ turns: driven into a drilled hole, it compresses to the bore and pushes outward uniformly, gripping by spring force rather than by hole precision. The light-duty DIN 7343 series uses a thinner strip than the heavy ISO 8752-type slotted pins, so it needs less driving force, stresses thin host material less, and shears predictably as a designed fuse in duty-light joints — hinges, pivots in stamped assemblies, small castings. The collected table covers Φ0.8 to Φ16 — 16 sizes — with the chamfer α ≈, the coil section thickness s, the as-coiled pin diameter d (min = nominal size / max), the source's second diameter column d 2 (max = nominal size / min), and its minimum single and double shear values in kilonewtons. Lengths, materials and finishes are not printed by the collected specification and stay per RFQ. For the heavy slotted counterpart see DIN 1481 / ISO 8752 on this site.

Standard DIN 7343 — spring-type straight pins, coiled, light duty (≈2¼-turn rolled spring-steel pin)
Size range Nominal diameters Φ0.8 – Φ16 (16 sizes tabulated); length to order
Tabulated geometry Per size: chamfer α ≈, coil section thickness s, pin diameter d (min=nominal size / max), source diameter column d 2 (max=nominal size / min)
Strength (source rows) Minimum single and double shear in kN per size as printed by the source — e.g. 0.2058 / 0.4116 kN at Φ0.8, 74.529 / 149.058 kN at Φ16
Function Springs against the drilled bore for uniform radial grip; light-duty shear pin and pivot in thin or brittle hosts
Materials / strength Not tabulated by the collected specification beyond the source shear rows — per RFQ (spring steel grade per duty)
DIN 7343 spring-type straight pins, coiled (light duty) - per-size dimensions (Φ0.8 - Φ16)All dimensions in millimeters except where noted. Attribute labels follow the source: α = chamfer ≈; s = material (wall) thickness; d = pin diameter after coiling (min = nominal size / max); d 2 = the source's second diameter column (max = nominal size / min); the two strength rows are the source's minimum single and double shear values in kilonewtons. Lengths, materials and finishes are not tabulated by the collected specification and stay per RFQ.
Sizeα — ≈sd — min=nominal sized — maxd 2 — max=nominal sized 2 — minMinimum shear strength, single (kN)Minimum double shear (kN)
Φ0.80.20.070.850.90.750.70.20580.4116
Φ10.30.081.11.150.950.850.2940.588
Φ1.20.40.11.31.41.151.050.4410.882
Φ1.50.50.131.621.721.41.30.71541.4308
Φ20.70.172.152.251.91.751.26422.5284
Φ2.50.80.212.652.82.352.21.90123.8024
Φ310.253.153.32.852.72.70485.4096
Φ3.51.20.293.673.843.353.153.69467.3892
Φ41.30.334.24.43.83.64.83149.6628
Φ51.70.425.255.54.84.57.487214.9744
Φ620.56.256.55.85.410.82921.658
Φ830.678.358.67.757.2519.20838.416
Φ1030.8410.4510.89.6930.497660.9952
Φ124112.512.8511.510.843.95387.906
Φ144.51.214.5514.9513.512.660.3876120.7752
Φ1651.316.551715.414.474.529149.058

Materials

  • Material and finish specified per RFQ — the collected specification table covers geometry and the source's strength rows only

Ordering & documentation

Documents

Shipments of DIN 7343 Coiled Spring Pins (Light Duty) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 7343 Coiled Spring Pins (Light Duty) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 7343 Coiled Spring Pins (Light Duty)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantities and lead times for din 7343 coiled spring pins (light duty) are confirmed at quotation — send pin type, diameter, length and material on the RFQ and the quote will carry a firm schedule; sample availability is confirmed with the quotation.

Storage & shipping

DIN 7343 Coiled Spring Pins (Light Duty) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 7343 coiled spring pins (light duty) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

When is a light-duty coiled pin the right choice over a slotted pin?

Look at the host, not the pin. The coiled pin's thin, multi-turn wall distributes its outward pressure around the bore, so it is the standard answer in thin sheet, die-castings and other brittle or thin-walled hosts where a stiff slotted pin would distort the hole or need heavy driving force. It also enters holes closer to nominal size. The trade-off is shear capacity: at the same nominal diameter the light-duty series carries materially less shear than the heavy slotted series, so size the joint from the tabulated minimum shear rows against your worst-case load — and treat a deliberate low shear rating as a feature where the pin is meant to be the sacrificial element protecting a mechanism.

What is the MOQ and lead time for this pin type?

Commercial terms for this family are confirmed at quotation — state sizes, tolerance class and quantities on the RFQ for a firm schedule. Common diameters in this pin type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

Which documents can I request with an order of DIN 7343 Coiled Spring Pins (Light Duty)?

Orders can be documented with a mill test certificate (MTC), a dimensional report and a salt spray test report, with full batch traceability from raw material to finished product; availability of each document for this designation is confirmed at quotation.

What should an RFQ for DIN 7343 Coiled Spring Pins (Light Duty) state?

State the full designation (DIN 7343), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 7343 Coiled Spring Pins (Light Duty) inquiry

  • ✓ Identify the pin type and its standard (for example parallel dowel or slotted spring pin).
  • ✓ Give nominal diameter, length and required fit/tolerance; include the mating-hole size and whether it is drilled or reamed.
  • ✓ State material, heat-treatment condition and corrosion finish, plus any specified shear or retention duty.
  • ✓ Give quantity per size, destination and inspection/certificate requirements.
  • ✓ Factory-direct pricing for your DIN 7343 Coiled Spring Pins (Light Duty)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.