DIN 1475 Grooved Pins, One-Third Length Centre Grooved

DIN 1475 grooved pins with a one-third length centre groove, Φ1.5 to Φ25 — the lock concentrated in the middle of the shank for sandwiched multi-plate joints — with the full collected 14-size table: diameter limits, chamfer, 70° taper angle, the source's minimum double-shear row and groove-diameter ranges.

Last updated: 2026-11

Request a Quote

DIN 1475 Grooved Pins, One-Third Length Centre Grooved in an industrial setting
Illustrative image redrawn from real DIN 1475 Grooved Pins, One-Third Length Centre Grooved product references — not a photograph of stocked items.

Specifications

DIN 1475 concentrates the three-groove lock into the middle third of the shank: both outer halves stay smooth. It is the grooved pin for a stack of plates clamped between two smooth members — the grooved centre grips the plate joint while the plain ends pivot or slide in outer members, and no groove edges score a working surface. The centre grooves are cut with the family's 70° taper (± 3° as printed by the source), so the lock is wedged, not just sprung. The collected table covers Φ1.5 to Φ25 — 14 sizes — with diameter limits (max / min), chamfer c ≈, the taper angle α, the source's minimum double-shear values in kilonewtons, and its per-size groove-diameter range d 1 (the Φ25 range cell is unreadable as-collected and is disclosed in the table note). Lengths, materials and finishes are not printed by the collected specification and stay per RFQ.

Standard DIN 1475 — grooved pins, one-third length centre grooved (three-groove press-fit pin for drilled holes)
Size range Nominal diameters Φ1.5 – Φ25 (14 sizes tabulated); length to order
Tabulated geometry Per size: pin diameter d (max / min), chamfer c ≈, taper angle α ± 3° (70°), groove diameter range d 1
Strength (source rows) Minimum double shear in kN per size, as printed by the source — 1.6 kN at Φ1.5 rising to 370.1 kN at Φ25
Function Centre-third taper wedge: locks the middle plate joint, smooth shanks through the outer members
Materials / strength Not tabulated by the collected specification beyond the source shear rows — per RFQ
DIN 1475 grooved pins, one-third length centre grooved - per-size dimensions (Φ1.5 - Φ25)All dimensions in millimeters. d = pin diameter (max = nominal size / min); c ≈ = chamfer; α (± 3°) = taper angle as printed by the source; d 1 = groove diameter range as printed by the source. The source's Φ25 d 1 cell reads "20.25-25.50" — treated as an as-collected inconsistency and rendered '-' rather than silently corrected. Minimum double shear (kN) = the source's strength row, reproduced as printed. Lengths, materials, hardness and finishes are not tabulated by the collected specification.
Sized — max=nominal sized — minc — ≈α (± 3°)Minimum double shear (kN)Groove diameter range d 1
Φ1.51.51.4750.270°1.61.60-1.63
Φ221.9750.2570°2.852.10-2.15
Φ2.52.52.4750.370°4.252.60-2.70
Φ332.9750.470°6.153.20-3.30
Φ443.9250.570°10.64.15-4.30
Φ554.9250.670°16.55.15-5.30
Φ665.9250.870°22.86.15-6.35
Φ887.91170°40.58.20-8.40
Φ10109.911.270°63.210.20-10.45
Φ121211.891.670°9112.25-12.50
Φ141413.891.670°12414.40-14.50
Φ161615.89270°156.816.50-16.60
Φ202019.872.570°236.520.25-20.50
Φ252524.87370°370.1-

Materials

  • Material and finish specified per RFQ — the collected specification table covers geometry and the source's strength rows only

Ordering & documentation

Documents

Shipments of DIN 1475 Grooved Pins, One-Third Length Centre Grooved are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 1475 Grooved Pins, One-Third Length Centre Grooved orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 1475 Grooved Pins, One-Third Length Centre Grooved), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantities and lead times for din 1475 grooved pins, one-third length centre grooved are confirmed at quotation — send pin type, diameter, length and material on the RFQ and the quote will carry a firm schedule; sample availability is confirmed with the quotation.

Storage & shipping

DIN 1475 Grooved Pins, One-Third Length Centre Grooved are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 1475 grooved pins, one-third length centre grooved dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Which joints suit a centre-grooved pin over end-grooved forms?

Three-or-more-member stacks. With DIN 1469 or 1472 the groove sits at one end, so a three-plate sandwich either leaves the middle joint ungripped or drags groove edges through a bearing member. DIN 1475 puts the wedge in the middle where the plates meet and keeps both shank ends plain — outer holes stay smooth for pivots, rollers or guides. It also helps assembly: the smooth lead-in starts easily before the grooves bite at depth. Check the stack-up before ordering — the grooved third must land on the joint in the assembled position, so overall length and member thicknesses need to be settled first. Size from the tabulated groove-diameter range against your drill tooling and compare the source's minimum double-shear row to the joint load with a real safety factor.

What is the MOQ and lead time for this pin type?

Commercial terms for this family are confirmed at quotation — state sizes, tolerance class and quantities on the RFQ for a firm schedule. Common diameters in this pin type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

Which documents can I request with an order of DIN 1475 Grooved Pins, One-Third Length Centre Grooved?

Orders can be documented with a mill test certificate (MTC), a dimensional report and a salt spray test report, with full batch traceability from raw material to finished product; availability of each document for this designation is confirmed at quotation.

What should an RFQ for DIN 1475 Grooved Pins, One-Third Length Centre Grooved state?

State the full designation (DIN 1475), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 1475 Grooved Pins, One-Third Length Centre Grooved inquiry

  • ✓ Identify the pin type and its standard (for example parallel dowel or slotted spring pin).
  • ✓ Give nominal diameter, length and required fit/tolerance; include the mating-hole size and whether it is drilled or reamed.
  • ✓ State material, heat-treatment condition and corrosion finish, plus any specified shear or retention duty.
  • ✓ Give quantity per size, destination and inspection/certificate requirements.
  • ✓ Factory-direct pricing for your DIN 1475 Grooved Pins, One-Third Length Centre Grooved
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.