ISO 8742 Grooved Pins, Third-Length Centre-Grooved

ISO 8742 third-length centre-grooved pins, d1 1,5 to 25 over a 32-length ladder (l 8 to 200) — the grooved pin whose grooves occupy only the middle third, for joints that must not be scored end-to-end.

Last updated: 2026-11

Request a Quote

ISO 8742 Grooved Pins, Third-Length Centre-Grooved in an industrial setting
Illustrative image redrawn from real ISO 8742 Grooved Pins, Third-Length Centre-Grooved product references — not a photograph of stocked items.

Specifications

The centre-grooved variant exists because a full-length groove set chews up everything it touches along the whole shank. ISO 8742 confines the three grooves to the middle third of the pin: the grip happens at the joint's centreline, while the outer thirds stay smooth — useful where a spigot must still slide, where the pin crosses a moving part, or where the exposed ends are a sealing or wear surface. The collected table runs d1 1,5 → 25 (tolerance h9 at 1,5, h11 from 10) with chamfer a 0,2 → 3, the double-shear row 1,6 → 444 kN, and a groove-diameter ladder of 32 lengths from l 8 up to l 200 — the longest length envelope of this batch, reflecting the designation's use in deep or stacked joints. The groove diameter per length runs 1,6 → 25,5 with the tolerance bands +0,05/0 (smallest), ±0,05 (mid), ±0,1 (from d1 12). Groove coverage beyond the middle third, material and finish are not tabulated — per RFQ.

Standard ISO 8742 — grooved pins, third-length centre-grooved
Size range d1 1,5 – 25 in the collected rows; tolerance h9 (1,5) / h11 (from 10) per the source banding
Chamfer a: 0,2 → 3
Double shear 1,6 → 444 kN across d1 1,5 → 25
Length ladder l 8 – 200 (32 lengths) with groove diameter per length
Not tabulated Groove-coverage detail beyond the third-length rule, material, hardness, finish — per RFQ
ISO 8742 third-length centre-grooved - attribute rowsAll dimensions in millimetres. Column header is the source's d1 nominal series; attribute labels carried verbatim: 'tolerance' is the d1 tolerance band per diameter (h9 at d1 1,5, h11 from d1 10 up, per the source's tolerance row), a = chamfer, and 'The smallest cutting force two sections kN' is the source's rendering of the minimum double-shear (two-section) load.
Row label1,522,5345681012162025
d1 Nominal1,522,5345681012162025
toleranceh9h11
a =0,20,250,30,40,50,630,811,21,622,53
The smallest cutting force two sections kN1,62,844,46,411,317,625,445,270,4101,8181283444
ISO 8742 third-length centre-grooved - groove diameter ladder, lengths 8 - 200Groove diameter per pin length, in millimetres. The source's tolerance band row ('+0,05 0', '±0,05', '±0,1') applies across the d1 columns as printed: +0,05/0 for the smallest, ±0,05 for the mid series, ±0,1 from d1 12 up. Blank = length not tabulated for that d1.
l Nominall min.l max.d1 1,5d1 2d1 2,5d1 3d1 4d1 5d1 6d1 8d1 10d1 12d1 16d1 20d1 25
87,758,251,6
109,7510,251,6
1211,512,51,62,12,63,1
1413,514,51,632,12,63,1
1615,516,51,632,12,63,1
1817,518,51,632,12,653,154,155,15
2019,520,51,632,12,653,154,155,15
2221,522,52,152,653,154,25,26,15
2423,524,52,152,653,154,25,26,15
2625,526,52,152,653,24,25,26,258,2
2827,528,52,152,653,24,25,26,258,2
3029,530,53,24,25,26,258,2
3231,532,53,24,255,256,258,2510,2
3534,535,53,24,255,256,258,2510,2
4039,540,53,24,255,256,38,310,212,25
4544,545,54,255,256,38,310,312,2516,2520,2525,25
5049,550,54,35,256,38,3510,312,316,320,2525,25
5554,2555,754,35,256,38,3510,312,316,320,325,3
6059,2560,754,35,36,38,3510,412,316,320,325,3
6564,2565,756,358,3510,412,416,420,325,3
7069,2570,756,358,410,412,416,420,425,4
7574,2575,756,358,410,412,416,420,425,4
8079,2580,756,358,410,4512,416,420,425,4
8584,2585,758,410,4512,516,520,425,4
9089,2590,758,410,4512,516,520,425,4
9594,2595,758,410,4512,516,520,525,5
10099,25100,758,410,4512,516,520,525,5
120119,25120,7510,4512,516,520,525,5
140139,25140,7510,412,516,520,525,5
160159,25160,7510,412,516,520,525,5
180179,25180,7512,516,520,525,5
200199,25200,7512,516,520,525,5

Materials

  • Material and finish specified per RFQ — centre-grooved pins commonly run spring or hardened steel; the smooth outer thirds can be specified where a sliding or sealed interface crosses the pin. State the joint stack-up at quotation: the grooved third must land on the shear plane, so the grip length fixes the pin length

Ordering & documentation

Documents

Shipments of ISO 8742 Grooved Pins, Third-Length Centre-Grooved are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 8742 Grooved Pins, Third-Length Centre-Grooved orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 8742 Grooved Pins, Third-Length Centre-Grooved), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantities and lead times for iso 8742 grooved pins, third-length centre-grooved are confirmed at quotation — send pin type, diameter, length and material on the RFQ and the quote will carry a firm schedule; sample availability is confirmed with the quotation.

Storage & shipping

ISO 8742 Grooved Pins, Third-Length Centre-Grooved are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 8742 grooved pins, third-length centre-grooved dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

When does a third-length centre-grooved pin beat a full-length grooved pin?

Whenever the pin shank does more than just sit in the hole. A full-length grooved pin grips along its entire body — fine for a pure locator, but wrong when part of the shank must pass through a clearance feature, seal against a bore mouth, or let an attached lever pivot during assembly. The centre-grooved pin localizes the grip to the middle third: the grooved zone lands on the shear plane of the joint, and the smooth ends do no damage and take no wear. Check two things before ordering: first, that the joint's shear plane actually sits at the pin's centreline — otherwise the grooves miss the material they must bite; second, the length ladder — the collected table runs l 8 to 200, and the groove diameter (not nominal d1) sizes the fit per length, from 1,6 up to 25,5. Material, hardness and finish are not tabulated on this page and are quoted per RFQ; the full-length alternatives in this catalog are ISO 8740/8741 and the taper-grooved ISO 8744.

Which documents can I request with an order of ISO 8742 Grooved Pins, Third-Length Centre-Grooved?

Orders can be documented with a mill test certificate (MTC), a dimensional report and a salt spray test report, with full batch traceability from raw material to finished product; availability of each document for this designation is confirmed at quotation.

What should an RFQ for ISO 8742 Grooved Pins, Third-Length Centre-Grooved state?

State the full designation (ISO 8742), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 8742 Grooved Pins, Third-Length Centre-Grooved inquiry

  • ✓ Identify the pin type and its standard (for example parallel dowel or slotted spring pin).
  • ✓ Give nominal diameter, length and required fit/tolerance; include the mating-hole size and whether it is drilled or reamed.
  • ✓ State material, heat-treatment condition and corrosion finish, plus any specified shear or retention duty.
  • ✓ Give quantity per size, destination and inspection/certificate requirements.
  • ✓ Factory-direct pricing for your ISO 8742 Grooved Pins, Third-Length Centre-Grooved
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.