ISO 2340 Clevis Pins Without Head

ISO 2340 headless clevis pins — d h11 4 to 90 with cotter hole d1 H13, the plain-ended pin retained by a cotter in fork (clevis) joints, with the collected d1/c/w rows across both source panels.

Last updated: 2026-11

Request a Quote

ISO 2340 Clevis Pins Without Head in an industrial setting
Illustrative image redrawn from real ISO 2340 Clevis Pins Without Head product references — not a photograph of stocked items.

Specifications

ISO 2340 is the headless half of the clevis-pin pair: where the ISO 2341 pin (metric clevis page in this catalog) carries a head that locates against one fork eye, this pin is a plain cylinder through and through — retained on both ends by split cotter pins through the cross-drilled d1 hole, sitting flush inside the clevis fork. That makes it the choice for enclosed linkages, rotating fork joints, and anywhere a protruding head would foul. The collected ladder covers d h11 from 4 to 90 across the source's two panels, with per-diameter cotter-hole diameter d1 H13 (1 mm at d4 up to 13 mm at d80/90), chamfer c max and the cotter-hole centre distance w from the pin end (2,2 mm at d4 up to 16 mm at the large end). Order by pin diameter; the cotter itself comes from the DIN 94 split-pin page in this catalog — note the pairing: the d1 H13 hole is sized for the cotter's shank. One verbatim source defect is flagged and not normalized: c max prints 33 at d = 12 against the ladder's 2/2/3 progression — read that cell per RFQ if the chamfer matters. Material and finish are not tabulated by the collected specification — per RFQ (clevis pins in machinery are commonly hardened steel or stainless; confirm at quotation).

Standard ISO 2340 — clevis pins without head
Size range d h11: 4 – 90 (two source panels: 4–24 and 27–90)
Cotter hole d1 H13: 1 (d4) → 13 (d80/90) mm, cross-drilled for a split cotter
Chamfer c max: 1 – 6 mm per size (d12 cell flagged verbatim)
Hole position w (cotter-hole centre to pin end): 2,2 – 16 mm per size
Material / finish Not tabulated by the collected specification — per RFQ
ISO 2340 clevis pins without head - d 4 - 24All dimensions in millimetres. Attribute labels follow the source: d = pin diameter (h11), d1 = cotter-hole diameter (H13), c = chamfer max., w = cotter-hole centre distance from the pin end. Decimal commas are the source's notation.
d h1145681012141618202224
d1 H1311,21,623,23,2445556,3
c max.1222233333444
w2,22,93,23,54,55,5667889
  • Row 2 (c max.): d = 12: the source prints c max. 33 against the ladder's 2 / 2 / 3 progression (likely a lost decimal comma). Carried verbatim, not normalized.
ISO 2340 clevis pins without head - d 27 - 90All dimensions in millimetres. Second panel of the source table, rendered as its own grid; labels as in the d 4 - 24 panel.
d h11273033364045505560708090
d1 H136,3888810101010131313
c max.444444466666
w91010101012121414161616

Materials

  • Material and finish specified per RFQ — state the joint duty (rotating, static load, outdoor) at quotation; the mating cotter is DIN 94 per this catalog

Ordering & documentation

Documents

Shipments of ISO 2340 Clevis Pins Without Head are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 2340 Clevis Pins Without Head orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 2340 Clevis Pins Without Head), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantities and lead times for iso 2340 clevis pins without head are confirmed at quotation — send pin type, diameter, length and material on the RFQ and the quote will carry a firm schedule; sample availability is confirmed with the quotation.

Storage & shipping

ISO 2340 Clevis Pins Without Head are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 2340 clevis pins without head dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Headless (ISO 2340) or headed (ISO 2341) clevis pin — which does my fork joint need?

End-play handling and enclosure. The headed ISO 2341 pin locates against one fork eye with its head, so it is faster to fit and cannot slide out — the standard choice for open linkages and quick-release yokes. The headless ISO 2340 pin needs a cotter at both ends (one through each fork eye side), which buys two things the headed pin cannot: the pin stays fully inside the fork envelope (nothing protrudes to foul a guard, chain or adjacent part), and axial play can be shimmed or adjusted cotter by cotter on both sides. The collected ladders make them near-companions in geometry — the d ranges overlap and both carry an H13-class cotter hole — so the real decision is spatial. Note the pairing discipline: the cotter itself is a DIN 94 split pin sized to the d1 hole, and the one flagged cell (c max 33 at d12, verbatim print) plus pin material and finish all stay per RFQ.

Which documents can I request with an order of ISO 2340 Clevis Pins Without Head?

Orders can be documented with a mill test certificate (MTC), a dimensional report and a salt spray test report, with full batch traceability from raw material to finished product; availability of each document for this designation is confirmed at quotation.

What should an RFQ for ISO 2340 Clevis Pins Without Head state?

State the full designation (ISO 2340), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 2340 Clevis Pins Without Head inquiry

  • ✓ Identify the pin type and its standard (for example parallel dowel or slotted spring pin).
  • ✓ Give nominal diameter, length and required fit/tolerance; include the mating-hole size and whether it is drilled or reamed.
  • ✓ State material, heat-treatment condition and corrosion finish, plus any specified shear or retention duty.
  • ✓ Give quantity per size, destination and inspection/certificate requirements.
  • ✓ Factory-direct pricing for your ISO 2340 Clevis Pins Without Head
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.