DIN 1476 Round Head Grooved Pins
DIN 1476 round head grooved pins, Φ1.4 to Φ20 — the three-groove press-fit pin with a formed round head, no separate retaining member needed — with the full collected 13-size table: head diameter d k, head height k, groove diameter d 2 limits and the source's radius and chamfer rows.
Last updated: 2026-11
Specifications
DIN 1476 adds a formed round head to the three-groove press-fit pin: the grooved shank locks in the drilled hole exactly like its headless siblings, and the head — driven flush or proud, depending on the assembly — becomes the axial stop. That removes a washer or a shoulder from the design in thin-panel and hardware work: one press-in part does the locating, the retention and the face coverage. The collected table covers Φ1.4 to Φ20 — 13 sizes — with pin diameter limits, head diameter d k (nominal / max / min), head height k (nominal / max / min), the source's radius r ≈ and chamfer f ≈ rows, and the groove diameter d 2 (nominal / max / min). The source footnotes part of its rows as not standardized reference values; the note is carried on the table. The source prints no shear row for this head form. Lengths, materials and finishes are not tabulated and stay per RFQ. For the countersunk-head counterpart see DIN 1477 on this site.
| Standard | DIN 1476 — round head grooved pins (three-groove press-fit pin with formed round head) |
|---|---|
| Size range | Nominal diameters Φ1.4 – Φ20 (13 sizes tabulated); length to order |
| Tabulated geometry | Per size: pin diameter d (max / min), head diameter d k (nominal / max / min), head height k (nominal / max / min), radius r ≈, chamfer f ≈, groove diameter d 2 (nominal / max / min) |
| Function | Grooved shank locks in a drilled hole; formed head is the built-in axial stop |
| Materials / strength | Not tabulated by the collected specification — per RFQ (the source prints no shear row for the head form) |
| Size | d — max=nominal size | d — min | d k — Nominal Size | d k — max | d k — min | k — Nominal Size | k — max | k — min | r — ≈ | f — ≈ | d 2 — Nominal Size | d 2 — max | d 2 — min |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Φ1.4 | 1.4 | 1.35 | 2.4 | 2.6 | 2.2 | 0.8 | 0.9 | 0.7 | 1.4 | 0.5 | 1.5 | 1.55 | 1.5 |
| Φ1.6 | 1.6 | 1.55 | 2.8 | 3 | 2.6 | 1 | 1.1 | 0.9 | 1.6 | 0.5 | 1.7 | 1.75 | 1.7 |
| Φ2 | 2 | 1.95 | 3.5 | 3.7 | 3.3 | 1.2 | 1.3 | 1.1 | 1.9 | 0.5 | 2.15 | 2.2 | 2.15 |
| Φ2.5 | 2.5 | 2.425 | 4.4 | 4.6 | 4.2 | 1.5 | 1.6 | 1.4 | 2.4 | 0.7 | 2.7 | 2.75 | 2.65 |
| Φ3 | 3 | 2.925 | 5.2 | 5.45 | 4.95 | 1.8 | 1.95 | 1.65 | 2.8 | 1 | 3.2 | 3.25 | 3.15 |
| Φ4 | 4 | 3.9 | 7 | 7.25 | 6.75 | 2.4 | 2.55 | 2.25 | 3.8 | 1.5 | 4.25 | 4.3 | 4.2 |
| Φ5 | 5 | 4.9 | 8.8 | 9.1 | 8.5 | 3 | 3.15 | 2.85 | 4.6 | 1.5 | 5.25 | 5.3 | 5.2 |
| Φ6 | 6 | 5.9 | 10.5 | 10.8 | 10.2 | 3.6 | 3.75 | 3.45 | 5.7 | 2 | 6.3 | 6.35 | 6.25 |
| Φ8 | 8 | 7.85 | 14 | 14.4 | 13.6 | 4.8 | 5 | 4.6 | 7.5 | 2 | 8.3 | 8.35 | 8.25 |
| Φ10 | 10 | 9.85 | 16 | 16 | 14.9 | 6.5 | 7.4 | 6.5 | 8 | 2.5 | 10.35 | 10.4 | 10.3 |
| Φ12 | 12 | 11.8 | 19 | 19 | 17.7 | 7.5 | 8.4 | 7.5 | 9.5 | 2.5 | 12.35 | 12.45 | 12.25 |
| Φ16 | 16 | 15.8 | 25 | 25 | 23.7 | 10 | 10.9 | 10 | 13 | 2.5 | 16.4 | 16.5 | 16.3 |
| Φ20 | 20 | 19.8 | 32 | 32 | 30.7 | 13 | 13.9 | 13 | 16.5 | 3 | 20.5 | 20.6 | 20.4 |
Materials
- Material and finish specified per RFQ — the collected specification table covers geometry and the source's strength rows only
Ordering & documentation
Documents
Shipments of DIN 1476 Round Head Grooved Pins are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 1476 Round Head Grooved Pins orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 1476 Round Head Grooved Pins), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantities and lead times for din 1476 round head grooved pins are confirmed at quotation — send pin type, diameter, length and material on the RFQ and the quote will carry a firm schedule; sample availability is confirmed with the quotation.
Storage & shipping
DIN 1476 Round Head Grooved Pins are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 1476 round head grooved pins dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Round head (DIN 1476) or countersunk head (DIN 1477) grooved pin?
Surface, not strength. The round head sits proud and covers a plain drilled hole — it is the choice on visible faces, thin panels where a countersink would break through, and assemblies where the head is allowed to ride in a slot or cam track. The countersunk DIN 1477 needs the hole counterbored but finishes flush, which matters on sliding faces and where a second part must pass over the pin. Both lock the same way — three grooves, pressed into a plain drilled hole, no reaming — so the decision rarely changes the joint design, only the face it presents. Match the head diameter d k / d 3 rows to your clearance and coverage needs, and confirm material and finish at quotation since neither is printed by the collected specification.
What is the MOQ and lead time for this pin type?
Commercial terms for this family are confirmed at quotation — state sizes, tolerance class and quantities on the RFQ for a firm schedule. Common diameters in this pin type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
Which documents can I request with an order of DIN 1476 Round Head Grooved Pins?
Orders can be documented with a mill test certificate (MTC), a dimensional report and a salt spray test report, with full batch traceability from raw material to finished product; availability of each document for this designation is confirmed at quotation.
What should an RFQ for DIN 1476 Round Head Grooved Pins state?
State the full designation (DIN 1476), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 1476 Round Head Grooved Pins inquiry
- ✓ Identify the pin type and its standard (for example parallel dowel or slotted spring pin).
- ✓ Give nominal diameter, length and required fit/tolerance; include the mating-hole size and whether it is drilled or reamed.
- ✓ State material, heat-treatment condition and corrosion finish, plus any specified shear or retention duty.
- ✓ Give quantity per size, destination and inspection/certificate requirements.
- ✓ Factory-direct pricing for your DIN 1476 Round Head Grooved Pins
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support