DIN 1477 Grooved Pins with Countersunk Head

DIN 1477 grooved pins with countersunk head, Φ1.4 to Φ20 — the three-groove press-fit pin that finishes flush below a 75° countersink — with the full collected 13-size table: head diameter d 3, head height k, groove diameter d 2 limits and the source's countersink-angle row.

Last updated: 2026-11

Request a Quote

DIN 1477 Grooved Pins with Countersunk Head in an industrial setting
Illustrative image redrawn from real DIN 1477 Grooved Pins with Countersunk Head product references — not a photograph of stocked items.

Specifications

DIN 1477 is the flush-finishing member of the headed grooved pins: a countersunk head formed to seat in a 75° countersink (the source prints 60° at Φ20) over a three-groove press-fit shank. Where a protruding head would catch a sliding part, foul a guard or mar a face, this is the pin that disappears into the surface while the grooved shank does the locking in a plain drilled hole — furniture hardware, hinges that close flush, and panel work where the pin doubles as a locating dowel without proud heads. The collected table covers Φ1.4 to Φ20 — 13 sizes — with pin diameter limits (max = nominal / min), the countersink angle, head diameter d 3 (nominal / max / min), head height k (nominal / max / min), chamfer f ≈, and the groove diameter d 2 (nominal / max / min). The source prints no shear row for this head form; lengths, materials and finishes stay per RFQ. For the protruding round head see DIN 1476 on this site.

Standard DIN 1477 — grooved pins with countersunk head (three-groove press-fit pin, flush-finishing)
Size range Nominal diameters Φ1.4 – Φ20 (13 sizes tabulated); length to order
Tabulated geometry Per size: pin diameter d (max = nominal / min), countersink angle (75°; 60° at Φ20 as printed), head diameter d 3 (nominal / max / min), head height k (nominal / max / min), chamfer f ≈, groove diameter d 2 (nominal / max / min)
Function Grooved shank locks in a drilled hole; countersunk head finishes flush in a 75° countersink
Materials / strength Not tabulated by the collected specification — per RFQ (the source prints no shear row for the head form)
DIN 1477 grooved pins with countersunk head - per-size dimensions (Φ1.4 - Φ20)All dimensions in millimeters. d = pin diameter (max = nominal size / min); α = countersink angle as printed by the source (75°; 60° at Φ20); d 3 = head diameter (Nominal Size / max / min); k = head height (Nominal Size / max / min); f ≈ = chamfer; d 2 = groove diameter (Nominal Size / max / min). The source prints no shear row for this head form. Lengths, materials, hardness and finishes are not tabulated by the collected specification.
Sized — max=nominal sized — minα — countersink angled 3 — Nominal Sized 3 — maxd 3 — mind 2 — Nominal Sized 2 — maxd 2 — mink — Nominal Sizek — maxk — minf — ≈
Φ1.41.41.3575°2.52.72.31.51.551.50.70.80.60.5
Φ1.61.61.5575°2.832.61.71.751.70.80.90.70.5
Φ221.9575°3.53.73.32.152.22.1511.10.90.5
Φ2.52.52.42575°4.44.64.22.72.752.651.21.31.10.7
Φ332.92575°5.25.454.953.23.253.151.41.51.31
Φ443.975°77.256.754.254.34.222.151.851.15
Φ554.975°8.89.18.55.255.35.22.52.652.351.15
Φ665.975°10.510.810.26.36.356.2533.152.852
Φ887.8575°1414.413.68.38.358.253.94.13.72
Φ10109.8575°161614.910.3510.410.344.23.82.5
Φ121211.875°191917.712.3512.4512.254.64.84.42.5
Φ161615.875°262624.716.416.516.36.57.46.52.5
Φ202019.860°31.531.530.220.520.620.49.510.49.53

Materials

  • Material and finish specified per RFQ — the collected specification table covers geometry and the source's strength rows only

Ordering & documentation

Documents

Shipments of DIN 1477 Grooved Pins with Countersunk Head are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 1477 Grooved Pins with Countersunk Head orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 1477 Grooved Pins with Countersunk Head), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantities and lead times for din 1477 grooved pins with countersunk head are confirmed at quotation — send pin type, diameter, length and material on the RFQ and the quote will carry a firm schedule; sample availability is confirmed with the quotation.

Storage & shipping

DIN 1477 Grooved Pins with Countersunk Head are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 1477 grooved pins with countersunk head dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

What does a flush grooved pin cost me in preparation?

One countersink per hole. Unlike the headless or round-head forms, DIN 1477 only finishes flush if the host carries a 75° countersink to the head height k in the table — a standard drill-cage operation, but it is tooling the other forms do not need, and the Φ20 size calls a 60° angle instead. In return the face is clear: nothing proud to catch, wear or measure over, and the pin can serve as a flush locating dowel between two machined parts. Order by nominal diameter and overall length with the head form stated, drill the shank hole plain (no reaming — the grooves set the fit), and confirm material and finish at quotation since the collected specification does not print them.

What is the MOQ and lead time for this pin type?

Commercial terms for this family are confirmed at quotation — state sizes, tolerance class and quantities on the RFQ for a firm schedule. Common diameters in this pin type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

Which documents can I request with an order of DIN 1477 Grooved Pins with Countersunk Head?

Orders can be documented with a mill test certificate (MTC), a dimensional report and a salt spray test report, with full batch traceability from raw material to finished product; availability of each document for this designation is confirmed at quotation.

What should an RFQ for DIN 1477 Grooved Pins with Countersunk Head state?

State the full designation (DIN 1477), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 1477 Grooved Pins with Countersunk Head inquiry

  • ✓ Identify the pin type and its standard (for example parallel dowel or slotted spring pin).
  • ✓ Give nominal diameter, length and required fit/tolerance; include the mating-hole size and whether it is drilled or reamed.
  • ✓ State material, heat-treatment condition and corrosion finish, plus any specified shear or retention duty.
  • ✓ Give quantity per size, destination and inspection/certificate requirements.
  • ✓ Factory-direct pricing for your DIN 1477 Grooved Pins with Countersunk Head
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.