ISO 8734 Parallel Dowel Pins (m6, Through Hardened)

Through-hardened dowel pins per ISO 8734, type A — nominal diameters 1 to 20 mm at m6 tolerance in the collected table (max +0.008 to +0.021 over nominal) with the c chamfer dimension per size; the collected source labels ISO 8734 as replacing DIN 6325.

Last updated: 2026-11

Request a Quote

ISO 8734 Parallel Dowel Pins (m6, Through Hardened) in an industrial setting
Illustrative image redrawn from real ISO 8734 Parallel Dowel Pins (m6, Through Hardened) product references — not a photograph of stocked items.

Specifications

ISO 8734 is the current international designation for the hardened cylindrical dowel pin: a precision-ground, through-hardened pin pressed into a reamed hole to locate parts repeatably and carry shear. The collected table declares the tolerance by name — m6, the standardized dowel class — and prints the resulting max/min band per size (5.012/5.004 mm at nominal 5, for example, so a nominal-5 pin measures a few microns over and presses into an h7-class hole). The series runs Φ1 to Φ20 with the c chamfer printed per size. Compared with the unhardened parallel pin DIN 7 / ISO 2338, the through-hardened ISO 8734 pin is the choice where the joint is repeatedly disassembled or where the pin must keep its end geometry under driving loads; compared with a taper pin (ISO 2339), it gives positionally repeatable location because the fit is a defined cylinder, not a cone. The source labels ISO 8734 as replacing DIN 6325 — the two collected tables match size for size.

Standard ISO 8734 — parallel pin / dowel pin, type A = through hardened; the collected source labels it as replacing DIN 6325
Size range Nominal diameters Φ1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 16, 20 mm
Tolerance class m6, declared in the collected table — max = nominal +0.008 to +0.021 mm, min = nominal +0.002 to +0.008 mm across the series; see per-size table
Chamfer c (≈ by size) 0.2 mm at Φ1 to 3.5 mm at Φ20 — see per-size table
Installation Pressed into a reamed hole; the m6 oversize band creates the interference fit — hole class and reamer size are part of the joint design
Compared with DIN 7 / ISO 2338 Same cylindrical dowel principle; ISO 8734 is through hardened — pick it for repeated assembly or driven installation
ISO 8734 parallel dowel pins (type A, m6) - per-size dimensions (d 1 - 20)All dimensions in millimeters. Tolerance class m6 as declared in the collected table.
Nominal diameter dd max (mm)d min (mm)c approx. (mm)
11.0081.0020.2
1.51.5081.5020.3
22.0082.0020.35
2.52.5082.5020.4
33.0083.0020.5
44.0124.0040.63
55.0125.0040.8
66.0126.0041.2
88.0158.0061.6
1010.01510.0062
1212.01812.0072.5
1616.01816.0073
2020.02120.0083.5

Materials

  • Material and finish specified per RFQ — the collected specification table covers geometry only

Ordering & documentation

Documents

Shipments of ISO 8734 Parallel Dowel Pins (m6, Through Hardened) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 8734 Parallel Dowel Pins (m6, Through Hardened) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 8734 Parallel Dowel Pins (m6, Through Hardened)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantities and lead times for iso 8734 parallel dowel pins (m6, through hardened) are confirmed at quotation — send pin type, diameter, length and material on the RFQ and the quote will carry a firm schedule; sample availability is confirmed with the quotation.

Storage & shipping

ISO 8734 Parallel Dowel Pins (m6, Through Hardened) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 8734 parallel dowel pins (m6, through hardened) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

What does m6 mean on a dowel pin, and what hole does it need?

m6 is the pin's tolerance band: for a nominal 6 mm pin, the collected table prints 6.012/6.004 mm — the pin is guaranteed to arrive between 4 and 12 microns over nominal. The joint works because the reamed hole is made slightly smaller than nominal (an h7-class hole at 6 mm runs just under 6.000), so pin minus hole is a few microns of interference: enough to lock the joint by press fit, small enough to press assemble without scoring. The numbers that matter for your shop are the pair, pin class and hole class together — specifying "6 m6 dowel, h7 reamed hole" fully defines the fit. A worn or hand-reamed hole breaks the interference budget even though both parts are "in tolerance", which is why doweled joints that have been disassembled many times are better re-reamed and upsized than re-pinned as-is.

What should an RFQ for this pin type state?

State the pin type, the standard designation, the nominal size and length, material if the drawing names one, and quantity per size — plus destination country. Commercial terms are confirmed at quotation.

Which documents can I request with an order of ISO 8734 Parallel Dowel Pins (m6, Through Hardened)?

Orders can be documented with a mill test certificate (MTC), a dimensional report and a salt spray test report, with full batch traceability from raw material to finished product; availability of each document for this designation is confirmed at quotation.

What should an RFQ for ISO 8734 Parallel Dowel Pins (m6, Through Hardened) state?

State the full designation (ISO 8734), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 8734 Parallel Dowel Pins (m6, Through Hardened) inquiry

  • ✓ Identify the pin type and its standard (for example parallel dowel or slotted spring pin).
  • ✓ Give nominal diameter, length and required fit/tolerance; include the mating-hole size and whether it is drilled or reamed.
  • ✓ State material, heat-treatment condition and corrosion finish, plus any specified shear or retention duty.
  • ✓ Give quantity per size, destination and inspection/certificate requirements.
  • ✓ Factory-direct pricing for your ISO 8734 Parallel Dowel Pins (m6, Through Hardened)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.