Commercial Solid Rivets (Inch Series, Per-Head-Type)

Commercial solid rivets, inch series body 1/16–1 in — one-piece rivets driven with a hammer or press, tabulated per head style: round, flat/nail, truss, universal, pan and countersunk, with head diameter and height min/max at every body diameter, countersink angles and the suggested clinch allowance.

Last updated: 2026-11

Request a Quote

Commercial Solid Rivets (Inch Series, Per-Head-Type) in an industrial setting
Illustrative image redrawn from real Commercial Solid Rivets (Inch Series, Per-Head-Type) product references — not a photograph of stocked items.

Specifications

A solid rivet is the original permanent fastener: a plain shank with a formed head, set by deforming the plain end into a second head with a hammer, rivet set or press — no thread, no separate nut, a joint that cannot loosen because it has nothing to unwind. The commercial (non-aerospace) inch series is tabulated here across six head styles in one grid, body diameters 1/16 through 1 in, and reading the grid is the whole skill of specifying one. Head style follows the joint: round head for general-purpose visible work; the flat/nail head for the shallow profile nail-and-plate work the name implies; truss and pan heads for wide-bearing or higher-domed applications on softer base material; universal head — the double-radius profile that became the aerospace standard — where smooth airflow or clean appearance matters; countersunk head where the rivet must sit flush. The table carries head diameter B and height C as min/max pairs per style per size, so tooling (the set die that shapes the shop head) can be sized to the head envelope, and the suggested clinch allowance F — the extra grip length consumed in forming the closing head, from .062 at 1/16 to 1.000 at 1 in — sets the minimum rivet length: grip plus F. Two source quirks matter at the bench: the countersink angle switches from 90° to 78° at 1/2 in body diameter, so a 78° countersink must be cut for the larger flush rivets; and the truss, universal and pan styles stop being offered above 7/16 — the larger commercial body diameters carry round, flat/nail and countersunk heads only. The first per-head-type solid-rivet ladder in the site's rivets coverage (the DIN 660/661 pages cover the metric round and countersunk designations).

Pattern One-piece solid rivet, driven (hammer/press-set), inch commercial series — six head styles in one grid: round, flat/nail, truss, universal, pan, countersunk
Size range Body diameters 1/16 – 1 in, fourteen sizes; truss/universal/pan styles offered through 7/16 (7/16 for truss/universal, 3/8 for pan) — larger bodies carry round, flat/nail and countersunk heads only
Tabulated geometry Per size and style: head diameter B and head height C (min/max); body diameter A (min/max); countersink angle D (90° through 3/8, 78° at 1/2 and above); suggested clinch allowance F (Ref) from .062 at 1/16 to 1.000 at 1 in
Setting data Minimum rivet length = grip + clinch allowance F; the clinch allowance is the length consumed forming the closing head
Materials / shear ratings Not tabulated by the collected source — per RFQ (state the rivet material — steel, aluminium, brass, copper — and the joint shear requirement with the order); the MIL-spec material grid is on the aerospace series page
Commercial solid rivets — head dimensions by head style, body 1/16–1 in (inch)All dimensions in inches. A = body diameter (min/max); B = head diameter (min/max) and C = head height (min/max) for each of the six head styles: round, flat/nail, truss, universal, pan, countersunk; D = countersink angle; F = suggested clinch allowance (Ref). Empty cells = head style not offered at that body diameter — reproduced verbatim (see anomaly note). The countersunk head angle switches 90° to 78° at 1/2 body diameter — verbatim.
Nominal Body Dia. (A)Body Dia. Min/MaxRound Head Dia. (B)Round Head Height (C)Flat/Nail Head Dia. (B)Flat/Nail Head Height (C)Truss Head Dia. (B)Truss Head Height (C)Universal Head Dia. (B)Universal Head Height (C)Pan Head Dia. (B)Pan Head Height (C)Countersunk Head Dia. (B)Countersunk Head Height (C)C.S. Degree (D)Suggested Clinch Allowance (F)
1/16.059/.064.102/.122.042/.052.120/.140.017/.027.115/.135.027/.037.098/.118.030/.040.110/.118.02790°.062
3/32.090/.096.162/.182.065/.077.180/.200.026/.038.206/.226.026/.038.177/.197.039/.051.153/.173.048/.060.163/.176.04090°.094
1/8.121/.127.215/.235.088/.100.240/.260.036/.048.277/.297.036/.048.240/.260.053/.065.205/.225.066/.078.217/.235.05390°.125
5/32.152/.158.268/.290.110/.124.301/.323.045/.059.348/.368.045/.059.301/.323.065/.079.257/.279.082/.096.272/.293.06690°.156
3/16.182/.191.322/.348.133/.147.361/.387.055/.069.422/.442.055/.069.361/.387.078/.092.308/.334.100/.114.326/.351.07990°.187
1/4.244/.253.430/.460.180/.196.485/.515.075/.091.560/.590.075/.091.485/.515.104/.120.414/.444.135/.151.437/.469.10690°.250
5/16.304/.316.538/.572.225/.243.607/.641.095/.113.702/.732.095/.113.607/.641.129/.147.518/.552.169/.187.547/.588.13390°.312
3/8.365/.380.646/.684.271/.291.731/.769.115/.135.848/.878.115/.135.731/.769.156/.176.625/.663.205/.225.656/.704.15990°.375
7/16.428/.443.754/.798.317/.339.852/.896.135/.157.990/1.020.135/.157.728/.772.239/.261.765/.823.18690°.438
1/2.478/.520.844/.938.375/.406.844/.938.250/.281.872/.936.26078°.500
5/8.600/.6551.063/1.157.469/.5001.063/1.157.313/.3441.112/1.194.33978°.625
3/4.725/.7801.281/1.390.562/.5931.281/1.390.375/.4061.322/1.421.40078°.750
7/8.850/.9051.500/1.609.656/.6871.500/1.609.438/.4691.532/1.647.46078°.875
1.975/1.0301.719/1.828.750/.7811.719/1.828.500/.5311.745/1.873.52078°1.000
  • Row 1 (1/16): Empty cells are verbatim: the truss-head cells are blank at 1/16, and truss/universal/pan cells are blank above 7/16 (those styles stop being offered at larger body diameters). Materials, lengths and shear ratings are not tabulated — per RFQ.
  • Row 9 (7/16): At 7/16 the universal-head cells are blank (the style's last offered size is 3/8) — reproduced verbatim.
  • Row 10 (1/2): The countersink angle switches from 90° to 78° at 1/2 body diameter in the source — verbatim as rendered; confirm the angle matches the mating countersink when ordering countersunk rivets at 1/2 in and above.

Materials

  • Rivet material specified per RFQ — the commercial series is commonly quoted in steel, aluminium, brass and copper; name the base materials being joined (galvanic pairing) and the load, and the material and finish will be confirmed at quotation

Ordering & documentation

Documents

Shipments of Commercial Solid Rivets (Inch Series, Per-Head-Type) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Commercial Solid Rivets (Inch Series, Per-Head-Type) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (Commercial Solid Rivets (Inch Series, Per-Head-Type)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for commercial solid rivets (inch series, per-head-type) is 10,000–50,000 pieces depending on size (applies to the standard sizes and finishes for commercial solid rivets (inch series, per-head-type); mixed, special or custom variants are quoted — final commercial terms per quotation) Standard production for commercial solid rivets (inch series, per-head-type) run 10–20 days. Quantities or variants of commercial solid rivets (inch series, per-head-type) outside the standard range are confirmed at quotation.

Storage & shipping

Commercial Solid Rivets (Inch Series, Per-Head-Type) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store commercial solid rivets (inch series, per-head-type) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

How do I size a solid rivet, and why does the head style change what is available?

Two decisions: diameter and length. Diameter follows the joint, not the rivet chart — pick the body size to suit the plies (rule of thumb in the trade is a rivet about three times the thickest ply's thickness, but the real constraint is hole size: drill for a clearance hole at the suggested work-hole diameter, then the rivet fills it). Length is grip plus clinch allowance — the collected table's F column is that allowance, the length consumed forming the second head: at 1/8 body it is .125, at 1/2 it is .500, and it scales to 1.000 at the 1 in bodies. Under-cut a rivet and the closing head forms incompletely; over-cut and the surplus bulges beside the head. Head style then narrows the size range: the grid shows truss, universal and pan heads offered through 7/16 (pan through 3/8) — above that the commercial series carries round, flat/nail and countersunk only, so a 5/8 universal-head rivet is not a commercial-series part and the aerospace series page is the place to look. One trap to check before cutting the countersink: the angle column switches 90° to 78° at 1/2 body — cutting a 90° sink for a 78° rivet leaves the head standing proud and the bearing on the wrong face. Every figure on this page is the collected table itself; where a cell is empty the style is simply not offered at that size in the source.

What is the MOQ and lead time for these rivets?

The minimum order quantity is 10,000–50,000 pieces depending on size. Standard production runs 10–20 days. Common sizes in these series are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for Commercial Solid Rivets (Inch Series, Per-Head-Type)?

Orders under this designation have a minimum order quantity of 10,000–50,000 pieces depending on size. Standard production ships in 10–20 days. Final commercial terms are confirmed per quotation.

What should an RFQ for Commercial Solid Rivets (Inch Series, Per-Head-Type) state?

State the full designation (Commercial Solid Rivets (Inch Series, Per-Head-Type)), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Commercial Solid Rivets (Inch Series, Per-Head-Type) inquiry

  • ✓ Identify blind, solid or structural rivet type and the applicable product standard.
  • ✓ Give rivet-body diameter and grip range for the complete material stack, plus the prepared-hole size.
  • ✓ Specify head style/clearance and state body and mandrel materials separately for blind rivets.
  • ✓ For load-bearing joints, provide required rivet-specific tensile and shear values; do not substitute a bolt property class.
  • ✓ State finish, quantity, destination and any lot-test or traceability documents required.
  • ✓ Factory-direct pricing for your Commercial Solid Rivets (Inch Series, Per-Head-Type)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.