Peel Blind Rivets

Peel blind rivets — the soft-material variant whose body splits into four legs and spreads the set load over a large blind-side footprint. For plastics, wood, resin, thin sheet and license-plate fastening; a retained-mandrel "T" version raises shear strength, and plastic caps cover the set head.

Last updated: 2026-11

Request a Quote

Peel Blind Rivets in an industrial setting
Illustrative image redrawn from real Peel Blind Rivets product references — not a photograph of stocked items.

Specifications

A peel blind rivet is built for materials that a standard blind rivet would crush or pull through: on setting, the body splits into four legs and the mandrel head is ejected, so the clamp spreads over four wide feet instead of a single bulge. The collected manufacturer line names the application set directly — soft or thin materials such as license plates, plastic, wood, resin and thin metal sheets. Two refinements matter in selection: the "T" version retains the mandrel head after installation for excellent shear strength (the ejected-mandrel standard form gives up that shear path), and leak-proof treatment is available on request. The visible trade is the blind side: the four-leg spread needs clearance behind the sheet and leaves a wider footprint, which is also why plastic caps exist in the line to cover the set head on cosmetic panels. Set with standard blind-rivet tooling; the strength figures below are line-specific — the 4.8 mm aluminium/galvanised-steel row runs higher in shear than tensile, an inversion of the usual blind-rivet pattern worth noting when rating the joint.

Type Peel blind rivet — body splits into four legs on setting; mandrel head ejected (standard) or retained (T version)
Blind-side footprint Four-leg spread gives a large secondary bearing area for soft or brittle parents — plastics, wood, resin, thin sheet
Target materials (manufacturer line) License plates, plastic, wood, resin, thin metal sheets
T version Mandrel head retained after installation for excellent shear strength; leak-proof treatment on request
Cosmetic option Plastic caps available in the line to cover the set head
Representative series data (4.0 mm, aluminium body / zinc-plated steel mandrel) dk 8.0, drill 4.4, tensile 1280 N, shear 1150 N; grips by length — L 10 → 2.0–5.0, L 12 → 4.0–7.0, L 14 → 6.0–9.0, L 16 → 8.0–11.0, L 18 → 10.0–13.0, L 20 → 12.0–15.0, L 25 → 15.0–20.0, L 30 → 20.0–25.0 mm
Representative series data (4.8 mm, same pairing) dk 9.5, drill 5.2, tensile 1800 N, shear 2300 N; grips — L 10 → 1.0–4.0, L 12 → 3.0–6.0, L 14 → 5.0–8.0, L 16 → 7.0–10.0, L 18 → 9.0–12.0, L 20 → 11.0–14.0, L 25 → 14.0–19.0, L 30 → 19.0–24.0, L 35 → 24.0–29.0 mm
Series scope Diameters 3.2–6.4 mm and other lengths; countersunk, special and retained heads beyond the dome rows tabulated
Applications (manufacturer line) Automotive registration plates and airbag-related assembly
MOQ / lead time 10,000–50,000 pieces by size; 10–20 days

Materials

  • Aluminium body / zinc-plated steel mandrel
  • Stainless steel A2 body / stainless steel A2 mandrel
  • Aluminium body / galvanised steel mandrel

Ordering & documentation

Documents

Shipments of Peel Blind Rivets are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Peel Blind Rivets orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (Peel Blind Rivets), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for peel blind rivets is 10,000–50,000 pieces depending on size (applies to the standard sizes and finishes for peel blind rivets; mixed, special or custom variants are quoted — final commercial terms per quotation) Standard production for peel blind rivets run 10–20 days. Quantities or variants of peel blind rivets outside the standard range are confirmed at quotation.

Storage & shipping

Peel Blind Rivets are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store peel blind rivets dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why four legs instead of the standard expanded body?

Because the failure mode it answers is pull-through. In soft or brittle parents — plastic, wood, resin — a standard blind rivet concentrates the blind-side clamp in one bulge and either crushes the material or tears out. Four split legs distribute the clamp over a wide footprint, so the joint holds in material that cannot resist a point load. The cost is blind-side clearance and a wider footprint: check what sits behind the sheet before specifying, and use the T version where the joint also carries shear, since the standard ejected-mandrel form leaves the four legs as its only mechanical lock.

What is the MOQ and lead time for these rivets?

Minimum order quantity is 10,000–50,000 pieces depending on size and material. Standard production lead time is 10–20 days. Common blind rivet sizes are widely stocked — confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for these rivets state?

State the rivet subtype (open-end, closed-end, structural blind rivet or rivet nut), body diameter, grip range or total material thickness, head style (dome, countersunk or large flange), body and mandrel materials (for example aluminum body with steel mandrel, or all-stainless), finish, required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Peel Blind Rivets inquiry

  • ✓ Identify blind, solid or structural rivet type and the applicable product standard.
  • ✓ Give rivet-body diameter and grip range for the complete material stack, plus the prepared-hole size.
  • ✓ Specify head style/clearance and state body and mandrel materials separately for blind rivets.
  • ✓ For load-bearing joints, provide required rivet-specific tensile and shear values; do not substitute a bolt property class.
  • ✓ State finish, quantity, destination and any lot-test or traceability documents required.
  • ✓ Factory-direct pricing for your Peel Blind Rivets
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.