ISO 15980 Open End Blind Rivets, Countersunk Head, St/St (Break Pull Mandrel)

DIN EN ISO 15980-2003 open end blind rivets with break pull mandrel and countersunk head, St/St: eight sizes from the ≈2.4 to the 6.4 class, shank/head/mandrel diameters, grip, recommended hole sizes, and the shear/tensile/mandrel-break/head-retention load rows per size.

Last updated: 2026-11

Request a Quote

ISO 15980 Open End Blind Rivets, Countersunk Head, St/St (Break Pull Mandrel) in an industrial setting
Illustrative image redrawn from real ISO 15980 Open End Blind Rivets, Countersunk Head, St/St (Break Pull Mandrel) product references — not a photograph of stocked items.

Specifications

ISO 15980 is the metric St/St (steel body, steel mandrel) open-end blind rivet with a countersunk head — the flush-finish member of the break-pull-mandrel family. The collected 2003 DIN EN edition table runs eight sizes (read vertically by the d max/min rows: 2.48/2.25 up to 6.48/6.25) with countersunk head diameters dk max/min (5.0/4.2 up to 13.4/11.6), head height k max 1 to 2.7, mandrel d1 max 1.5 to 4, and minimum grip L1 25 (smallest three sizes) or 27 (the rest). The 2003 edition adds two rows its 2002 predecessor does not print: recommended hole size min/max (2.5/2.6 up to 6.5/6.6) — drill the hole inside that band or the mandrel either pulls through without setting or the body tears before it fills. The load rows are the acceptance numbers: minimum shear 650 to 4900 N, minimum tensile 700 to 5700 N, maximum mandrel break 2000 to 13000 N (the setting window the tool must cover), plus a head-retention test load 30 to 50 N. Compared with the protruding-head closed-end ISO 15976 series in the same family, this countersunk open-end series trades the sealed cup and the proud head for a flush bearing surface — the countersink eats some head height (k max 2.7 at the top size), and the open end leaves the mandrel hole, so it belongs on joints where flushness matters more than sealing.

Standard / scope DIN EN ISO 15980-2003 (ISO 15980-2002 prior edition) open end blind rivets, break pull mandrel, countersunk head — St/St (steel body / steel mandrel), eight sizes as tabulated
Shank d max/min 2.48/2.25, 3.08/2.85, 3.28/3.05, 4.08/3.85, 4.88/4.65, 5.08/4.85, 6.08/5.85, 6.48/6.25 — the size identification, read vertically
Head dk / height k / mandrel d1 dk max/min 5.0/4.2 to 13.4/11.6; k max 1 to 2.7; d1 max 1.5 to 4
Grip L1 min / mandrel b max L1 min 25 (three smallest sizes) or 27; mandrel b max prints as a formula on L: L(max)+3.5 at the small sizes up to L(max)+5.5 at 6.48
Recommended hole size min/max per size: 2.5/2.6 up to 6.5/6.6 — printed in the 2003 edition only
Load rows Min shear 650/950/1100/1700/2900/3100/4300/4900 N; min tensile 700/1100/1200/2200/3100/4000/4800/5700 N; max mandrel break 2000/3200/4000/5800/7500/8000/12500/13000 N; head retention test load 30/35/35/40/45/45/50/50 N
Not tabulated Length/grip ladder beyond L1, edge distances, corrosion protection — per RFQ
DIN EN ISO 15980 open end blind rivets (break pull mandrel, countersunk head), St/St — geometry, hole sizes and load rows by sizeThe source prints an attribute-label grid positionally paired with a numeric grid; the merged rows carry the label cells verbatim followed by the numeric values per size column. Millimetres; loads in newtons. Columns are the printed size ladder (d max row 2.48 to 6.48 — the ≈3.2/4/4.8/6.4 class), read vertically. Load rows are minimums except the mandrel break row, which is a maximum. The 2003 DIN EN edition prints two extra rows over the 2002 ISO edition: Recommend Hole Size min/max.
AttributeSub-label
dmax2.483.083.284.084.885.086.086.48
dmin2.252.853.053.854.654.855.856.25
d kmax5.06.36.78.410.110.512.613.4
d kmin4.25.45.86.98.38.710.811.6
kmax11.31.31.722.12.52.7
d 1max1.52.152.152.83.53.53.54
L 1min2525252727272727
bmaxL(max)+3.5L(max)+3.5L(max)+4L(max)+4L(max)+4.5L(max)+4.5L(max)+5L(max)+5.5
Recommend Hole Sizemin2.53.13.34.14.95.16.16.5
Recommend Hole Sizemax2.63.23.44.255.26.26.6
Shear load/N(min)Shear load/N(min)Shear load/N(min)650950110017002900310043004900
Tensile load/N(min)Tensile load/N(min)Tensile load/N(min)7001100120022003100400048005700
Mandrel break load/N(max)Mandrel break load/N(max)Mandrel break load/N(max)2000320040005800750080001250013000
Head retention test load(N)Head retention test load(N)Head retention test load(N)3035354045455050
  • The label grid alternates two-cell rows (attribute + sub-label) and three-cell rows (the load labels print their label text across all three cells) — source rows carry differing non-empty cell counts (2/3), grid padded empty. Duplicated label cells carried verbatim.

Materials

  • St/St is the high-strength, indoor-grade combination: a steel body and steel mandrel put these load rows well above the same-size aluminium-body rivets, but bare steel corrodes in wet service — for outdoor exposure state the finish (zinc-plated body or a different body/mandrel pairing) on the RFQ. The countersunk head wants a pre-countersunk or prepared hole to sit flush; state sheet thicknesses and grip so we quote the length. Lead time, MOQ and price: contact for confirmation.

Ordering & documentation

Documents

Shipments of ISO 15980 Open End Blind Rivets, Countersunk Head, St/St (Break Pull Mandrel) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 15980 Open End Blind Rivets, Countersunk Head, St/St (Break Pull Mandrel) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 15980 Open End Blind Rivets, Countersunk Head, St/St (Break Pull Mandrel)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for iso 15980 open end blind rivets, countersunk head, st/st (break pull mandrel) is 10,000–50,000 pieces depending on size (applies to the standard sizes and finishes for iso 15980 open end blind rivets, countersunk head, st/st (break pull mandrel); mixed, special or custom variants are quoted — final commercial terms per quotation) Standard production for iso 15980 open end blind rivets, countersunk head, st/st (break pull mandrel) run 10–20 days. Quantities or variants of iso 15980 open end blind rivets, countersunk head, st/st (break pull mandrel) outside the standard range are confirmed at quotation.

Storage & shipping

ISO 15980 Open End Blind Rivets, Countersunk Head, St/St (Break Pull Mandrel) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 15980 open end blind rivets, countersunk head, st/st (break pull mandrel) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

How does ISO 15980 differ from the closed-end ISO 15976 and the open-end ISO 16583 pages in this family?

Head form, sealing and material. ISO 15976 (this family's other St/St standard) caps the end — the rivet seals the mandrel hole but sits proud; ISO 16583 is the copper-body countersunk open-end series, softer and corrosion-friendlier; ISO 15980 here is the steel-body countersunk open-end one: flush finish, higher load rows than the copper series, but the mandrel hole stays open down the set rivet. Choose by which of flushness, sealing or corrosion you cannot compromise, and note the strength comparison honestly — the closed-end St/St rows beat this series at the same nominal size, so move to 15980 for the surface, not for the numbers.

Which edition applies — ISO 15980-2002 or DIN EN ISO 15980-2003 — and does the difference matter?

The tabulated geometry and load rows are common to both editions; what the 2003 DIN EN adoption adds is the recommended hole size band (min/max per size, 2.5/2.6 up to 6.5/6.6) that the 2002 print does not carry. Practically: drill to the 2003 band — it is the edition the collected table represents, and the hole size is the single biggest cause of faulty setting in blind riveting. Quote the designation as printed on your drawing; where only "ISO 15980" is given we supply the current DIN EN edition and confirm on the order acknowledgement.

What is the MOQ and lead time for ISO 15980 Open End Blind Rivets, Countersunk Head, St/St (Break Pull Mandrel)?

Orders under this designation have a minimum order quantity of 10,000–50,000 pieces depending on size. Standard production ships in 10–20 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ISO 15980 Open End Blind Rivets, Countersunk Head, St/St (Break Pull Mandrel) state?

State the full designation (ISO 15980 Open End Blind Rivets, Countersunk Head, St/St (Break Pull Mandrel)), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 15980 Open End Blind Rivets, Countersunk Head, St/St (Break Pull Mandrel) inquiry

  • ✓ Identify blind, solid or structural rivet type and the applicable product standard.
  • ✓ Give rivet-body diameter and grip range for the complete material stack, plus the prepared-hole size.
  • ✓ Specify head style/clearance and state body and mandrel materials separately for blind rivets.
  • ✓ For load-bearing joints, provide required rivet-specific tensile and shear values; do not substitute a bolt property class.
  • ✓ State finish, quantity, destination and any lot-test or traceability documents required.
  • ✓ Factory-direct pricing for your ISO 15980 Open End Blind Rivets, Countersunk Head, St/St (Break Pull Mandrel)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.