Tri-Fold Blind Rivets
Tri-fold (triform) blind rivets — all-aluminium bodies that split into three legs on setting, giving a large blind-side bearing surface, a wide clamping range and a guaranteed retained mandrel head with good vibration resistance. The soft-material rivet when the mandrel must stay in the joint.
Last updated: 2026-11
Specifications
The tri-fold rivet is the retained-mandrel member of the soft-material blind rivets: an aluminium-alloy body that splits into exactly three parts as it sets, each leg folding back to widen the blind-side bearing area. The collected manufacturer line lists the three advantages as designed — a large secondary bearing surface on the blind side, a wide clamping range, and a guaranteed retained mandrel head with good vibration resistance. That retained mandrel is the selection difference from the peel rivet: where the peel form ejects the mandrel head (accepting a lower shear path in exchange for the widest spread), the tri-fold keeps it locked in the set body, so the joint keeps its shear member and does not rattle — which is why the line recommends it for soft materials where the fastener still has to stay tight under vibration. The collected all-aluminium series (body and mandrel both aluminium, for colour-matched and corrosion-matched joints) runs 4.0 and 4.8 mm bodies with grip windows up to 12 mm, and the line offers colours and anodization plus a Type 2 version with relative water resistance. Like any split-body rivet it needs blind-side clearance for the folded legs.
| Type | Tri-fold (triform) blind rivet — all-aluminium body splits into three legs on setting |
|---|---|
| Bearing surface | Large secondary bearing surface on the blind side — the three folded legs spread the clamp for soft materials |
| Mandrel retention | Guaranteed retained mandrel head — perfect fastening and good resistance to vibration (manufacturer line) |
| Clamping range | Wide clamping range relative to body size — see the series data below |
| Type 2 version | Golight Type 2 offers relative water resistance and good vibration resistance |
| Finish options | Colours and anodization available in the line |
| Representative series data (4.0 mm, aluminium body / aluminium mandrel) | dk 8.0, drill 4.4, tensile 850 N, shear 700 N; grips — L 16 → 1.0–4.5, L 19 → 3.0–7.0, L 25 → 4.0–12.0 mm |
| Representative series data (4.8 mm, same pairing) | dk 9.5, drill 5.2, tensile 1500 N, shear 1300 N; grips — L 16 → 1.0–4.5, L 20 → 4.0–7.5, L 25 → 7.0–12.0 mm |
| Applications (manufacturer line) | Automotive registration plates, storage and warehouse equipment |
| MOQ / lead time | 10,000–50,000 pieces by size; 10–20 days |
Materials
- Aluminium alloy body / aluminium mandrel (colour and anodized options)
Ordering & documentation
Documents
Shipments of Tri-Fold Blind Rivets are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Tri-Fold Blind Rivets orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (Tri-Fold Blind Rivets), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for tri-fold blind rivets is 10,000–50,000 pieces depending on size (applies to the standard sizes and finishes for tri-fold blind rivets; mixed, special or custom variants are quoted — final commercial terms per quotation) Standard production for tri-fold blind rivets run 10–20 days. Quantities or variants of tri-fold blind rivets outside the standard range are confirmed at quotation.
Storage & shipping
Tri-Fold Blind Rivets are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store tri-fold blind rivets dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Tri-fold or peel rivet for plastics — where is the line?
By what the joint must keep. Both split into legs and spread the blind-side clamp over soft or brittle parents, so both solve pull-through. The tri-fold retains the mandrel head in the set body — the joint keeps its shear member and stays tight under vibration; the peel form ejects the mandrel and spreads even wider on four legs, but the legs alone carry shear. Specify tri-fold where the fastener must stay tight and strong in service (moving parts, panels that flex); peel where maximum spread on the most fragile material matters more than retained-mandrel shear.
What is the MOQ and lead time for these rivets?
Minimum order quantity is 10,000–50,000 pieces depending on size and material. Standard production lead time is 10–20 days. Common blind rivet sizes are widely stocked — confirm the exact schedule against quantity and size mix at quotation.
What should an RFQ for these rivets state?
State the rivet subtype (open-end, closed-end, structural blind rivet or rivet nut), body diameter, grip range or total material thickness, head style (dome, countersunk or large flange), body and mandrel materials (for example aluminum body with steel mandrel, or all-stainless), finish, required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your Tri-Fold Blind Rivets inquiry
- ✓ Identify blind, solid or structural rivet type and the applicable product standard.
- ✓ Give rivet-body diameter and grip range for the complete material stack, plus the prepared-hole size.
- ✓ Specify head style/clearance and state body and mandrel materials separately for blind rivets.
- ✓ For load-bearing joints, provide required rivet-specific tensile and shear values; do not substitute a bolt property class.
- ✓ State finish, quantity, destination and any lot-test or traceability documents required.
- ✓ Factory-direct pricing for your Tri-Fold Blind Rivets
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support