DIN 6792 Semi-Tubular Countersunk Head Rivets
DIN 6792 semi-tubular countersunk head rivets, d1 1.6 to 10: flush head geometry with js14/H13 tolerances and the commercial-length mass ladder to 50 mm.
Last updated: 2026-11
Specifications
DIN 6792 is the flush-finish member of the semi-tubular pair: the same cavity-setting principle as DIN 6791 with a countersunk head that sits at or below the surface — the choice where the riveted face is a sliding, wearing or visible surface. The collected 2012-edition table (the source marks the series withdrawn) runs d1 1.6 to 10: head diameter d2 nom (20 at d10), head height k js14 (4.4 current edition — the superseded table the source prints beside it carries k 3 at the top size, an edition difference kept visible), material min d3 (9.4), cavity diameter d4 H13 (7.6) and cavity depth t +0.5/0 (10). The mass ladder runs lengths 3 to 50 mm per diameter. Note the flush result needs the matched countersink on the top sheet, exactly as with solid csk rivets — the head geometry columns are the countersink specification.
| Standard / scope | DIN 6792 semi-tubular countersunk head rivets — d1 1.6 to 10, withdrawn (source label); 2012 edition with a superseded edition table transcribed beside it |
|---|---|
| Head geometry | d2 nom to 20; k js14 4.4 (2012) vs 3 (superseded table at the top size) — edition difference carried verbatim |
| Cavity geometry | Cavity depth t +0.5/0 to 10, cavity diameter d4 H13 7.6, material min d3 9.4 at d1 10 |
| Commercial lengths | Mass ladder (kg per 1000 pcs, ρ=7,85 kg/dm³) l 3 to 50 across d1 1.6–10 |
| Not tabulated | Countersink angle/tooling data, material families, setting force — per RFQ |
| d1 nom size | d2 nom | k js 14 | d3 min | d4 H13 | t +0.5 0 |
|---|---|---|---|---|---|
| 1.6 | 3.2 | 0.7 | 1.52 | 0.9 | 1.5 |
| 2 | 3.24 | 0.9 | 1.87 | 1.2 | 2.5 |
| 2.5 | 5 | 1.1 | 2.37 | 1.7 | 2.5 |
| 3 | 6 | 1.3 | 2.87 | 1.9 | 3 |
| 3.5 | 7 | 1.5 | 3.37 | 2.2 | 4 |
| 4 | 8 | 1.8 | 3.87 | 2.7 | 4 |
| 5 | 10 | 2.2 | 4.82 | 3.5 | 5 |
| 6 | 12 | 2.6 | 5.82 | 4.2 | 6.5 |
| 8 | 16 | 3.5 | 6.82 | 6 | 8 |
| 10 | 20 | 4.4 | 9.4 | 7.6 | 10 |
- Source spanning title row carried verbatim: "Dimensions in mm - source Din 6792 - Withdrawn Publication date: 05-2012".
| d thread size | 1.6 | 2 | 2.5 | 3 | 3.5 | 4 | 5 | 6 | 8 | 10 | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| nominal length l | |||||||||||||||
| 3 | 0.068 | ||||||||||||||
| 4 | 0.084 | 0.132 | 0.217 | ||||||||||||
| 5 | 0.1 | 0.157 | 0.256 | 0.395 | |||||||||||
| 6 | 0.115 | 0.181 | 0.294 | 0.45 | 0.626 | 0.865 | |||||||||
| 8 | 0.147 | 0.231 | 0.371 | 0.561 | 0.777 | 1.06 | 1.72 | ||||||||
| 10 | 0.179 | 0.28 | 0.448 | 0.672 | 0.928 | 1.26 | 2.03 | 2.99 | |||||||
| 12 | 0.21 | 0.329 | 0.525 | 0.783 | 1.08 | 1.46 | 2.33 | 3.44 | 6.48 | ||||||
| 14 | 0.242 | 0.378 | 0.602 | 0.894 | 1.23 | 1.65 | 2.64 | 3.88 | 7.27 | ||||||
| 16 | 0.273 | 0.427 | 0.679 | 1.01 | 1.38 | 1.85 | 2.95 | 4.32 | 8.05 | 13.26 | |||||
| 20 | 0.337 | 0.526 | 0.833 | 1.23 | 1.68 | 2.25 | 3.57 | 5.21 | 9.63 | 15.7 | |||||
| 25 | 0.416 | 0.649 | 1.03 | 1.5 | 2.06 | 2.74 | 4.34 | 6.3 | 11.6 | 18.8 | |||||
| 30 | 0.495 | 0.772 | 1.22 | 1.78 | 2.44 | 3.23 | 5.11 | 7.43 | 13.6 | 21.9 | |||||
| 35 | 0.574 | 0.895 | 1.41 | 2.06 | 2.82 | 3.72 | 5.88 | 8.54 | 15.5 | 25 | |||||
| 40 | 0.653 | 1.018 | 1.6 | 2.34 | 3.19 | 4.22 | 6.65 | 9.65 | 17.5 | 28.1 | |||||
| 45 | 0.732 | 1.141 | 1.8 | 2.61 | 3.57 | 4.71 | 7.42 | 10.8 | 19.5 | 31.2 | |||||
| 50 | 0.811 | 1.264 | 1.99 | 2.89 | 3.95 | 5.2 | 8.19 | 11.9 | 21.4 | 34.3 |
- Source spanning title row carried verbatim: "Din 6792 - 2012 ≈ weight in kg x1000 pcs, (ρ=7,85 kg/dm 3 )".
- Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (16/11/1/2/4/5/7/8/9/10) — grid padded empty; per-row pre-pad widths: 16,11,1,2,4,5,7,8,9,10,10,11,11,11,11,11,11,11,11.
| d1 nom size | d2 nom | k js 14 | d3 min | d4 H13 | t +0.5 0 |
|---|---|---|---|---|---|
| 1.6 | 3.2 | 0.45 | 1.52 | 0.9 | 1.5 |
| 2 | 3.24 | 0.6 | 1.87 | 1.2 | 2.5 |
| 2.5 | 5 | 0.7 | 2.37 | 1.7 | 2.5 |
| 3 | 6 | 0.9 | 2.87 | 1.9 | 3 |
| 3.5 | 7 | 1 | 3.37 | 2.2 | 4 |
| 4 | 8 | 1.2 | 3.87 | 2.7 | 4 |
| 5 | 10 | 1.4 | 4.82 | 3.5 | 5 |
| 6 | 12 | 1.7 | 5.82 | 4.2 | 6.5 |
| 8 | 16 | 2.3 | 6.82 | 6 | 8 |
| 10 | 20 | 3 | 9.4 | 7.6 | 10 |
- Source spanning title row carried verbatim: "Dimensions in mm - source Din 6792 - Withdrawn Publication date: 05-1993".
| d thread size | 1.6 | 2 | 2.5 | 3 | 3.5 | 4 | 5 | 6 | 8 | 10 | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| nominal length l | |||||||||||||||
| 3 | 0.056 | ||||||||||||||
| 4 | 0.072 | 0.111 | |||||||||||||
| 5 | 0.088 | 0.136 | 0.211 | ||||||||||||
| 6 | 0.104 | 0.16 | 0.25 | 0.383 | |||||||||||
| 8 | 0.135 | 0.21 | 0.327 | 0.494 | 0.661 | 0.84 | |||||||||
| 10 | 0.259 | 0.404 | 0.605 | 0.812 | 1.04 | 1.67 | 2.39 | ||||||||
| 12 | 0.471 | 0.716 | 0.963 | 1.23 | 1.98 | 2.83 | |||||||||
| 14 | 0.827 | 1.11 | 1.43 | 2.28 | 3.28 | 5.87 | |||||||||
| 16 | 0.938 | 1.27 | 1.63 | 2.59 | 3.72 | 6.66 | |||||||||
| 20 | 1.57 | 2.02 | 3.21 | 4.61 | 8.23 | 13.1 | |||||||||
| 25 | 3.98 | 5.72 | 10.2 | 16.2 | |||||||||||
| 30 | 6.83 | 12.2 | 19.3 | ||||||||||||
| 35 | 14.2 | 22.3 | |||||||||||||
| 40 | 16.1 | 25.4 | |||||||||||||
| 45 | 28.5 | ||||||||||||||
| 50 | 31.6 |
- Source spanning title row carried verbatim: "DIN 6792 - ≈ weight in kg x1000 pcs, (ρ=7,85 kg/dm 3 )".
- Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (16/11/1/2/3/4/5/7/9/10) — grid padded empty; per-row pre-pad widths: 16,11,1,2,3,4,5,7,9,9,10,10,11,11,11,11,11,11,11.
Materials
- Same material families as the pan-head DIN 6791 — steel, brass, copper, aluminium — selected by the surface duty: csk rivets in sliding or wearing faces want the harder tempers, decorative flush work takes brass and aluminium. Provide the plate stack and which sheet carries the countersink; the head columns (d2, k) define the csk geometry the tooling must produce
Ordering & documentation
Documents
Shipments of DIN 6792 Semi-Tubular Countersunk Head Rivets are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 6792 Semi-Tubular Countersunk Head Rivets orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 6792 Semi-Tubular Countersunk Head Rivets), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for din 6792 semi-tubular countersunk head rivets is 10,000–50,000 pieces depending on size (applies to the standard sizes and finishes for din 6792 semi-tubular countersunk head rivets; mixed, special or custom variants are quoted — final commercial terms per quotation) Standard production for din 6792 semi-tubular countersunk head rivets run 10–20 days. Quantities or variants of din 6792 semi-tubular countersunk head rivets outside the standard range are confirmed at quotation.
Storage & shipping
DIN 6792 Semi-Tubular Countersunk Head Rivets are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 6792 semi-tubular countersunk head rivets dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
DIN 6791 or DIN 6792 — what decides the head form?
The surface after setting. The pan head of DIN 6791 stands proud and spreads its load on the sheet — the stronger, simpler joint for internal work; the countersunk head of DIN 6792 buries itself for sliding parts, wear surfaces, aerodynamic or visual faces, at the cost of the countersinking operation and a slightly reduced head section. The tables share cavity geometry (d4 H13, t depth) at the same diameters, so the setting tooling follows the same bands — only the die face changes. Where sheets are thin and both forms fit the joint, production cost usually settles it: the csk head adds a countersink step per hole, which is why pan head dominates volume work and csk dominates the exposed ones.
The standard is marked withdrawn — what changes for my order?
Nothing on the shop floor: the withdrawn label is the source standard's status, and DIN 6792 parts are supplied against the historical call-out as the installed base demands. The one thing to watch is the edition detail the page makes visible — the transcribed tables show the head height k printed 4.4 in the 2012 edition against 3 in the superseded table at the top size, so a die built for old stock will not seat new stock identically at the large diameters. Quote the standard plus size and length, add the edition your tooling assumes, and we match the supply to it; for new drawings the current semi-tubular ISO series is the forward path and we map sizes on request.
What is the MOQ and lead time for DIN 6792 Semi-Tubular Countersunk Head Rivets?
Orders under this designation have a minimum order quantity of 10,000–50,000 pieces depending on size. Standard production ships in 10–20 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 6792 Semi-Tubular Countersunk Head Rivets state?
State the full designation (DIN 6792 Semi-Tubular Countersunk Head Rivets), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 6792 Semi-Tubular Countersunk Head Rivets inquiry
- ✓ Identify blind, solid or structural rivet type and the applicable product standard.
- ✓ Give rivet-body diameter and grip range for the complete material stack, plus the prepared-hole size.
- ✓ Specify head style/clearance and state body and mandrel materials separately for blind rivets.
- ✓ For load-bearing joints, provide required rivet-specific tensile and shear values; do not substitute a bolt property class.
- ✓ State finish, quantity, destination and any lot-test or traceability documents required.
- ✓ Factory-direct pricing for your DIN 6792 Semi-Tubular Countersunk Head Rivets
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support