DIN 7339 Hollow Rivets, One Piece, Drawn from Strip

DIN 7339 one-piece hollow rivets drawn from strip, d1 1.5 to 6: body and bore geometry with ±10% wall tolerance, and the commercial-length mass ladder to 20 mm.

Last updated: 2026-11

Request a Quote

DIN 7339 Hollow Rivets, One Piece, Drawn from Strip in an industrial setting
Illustrative image redrawn from real DIN 7339 Hollow Rivets, One Piece, Drawn from Strip product references — not a photograph of stocked items.

Specifications

DIN 7339 is the one-piece hollow rivet rolled from strip — the cheapest tubular rivet there is, because the whole body including the head is drawn from a single strip thickness s (±10% as the table prints): electrical contacts, small hinges, card and leather work, any light clamp joint set in a press. The collected 02/2011-edition table runs d1 1.5 to 6 with head d2 nom (10 at d6), bore d3 0/-0.4 (5.02 at d6 — the bore is the sizing dimension for contacts and pins through it), head side e max (3), strip thickness s ±10% (0.4) and burr r max (0.6); the superseded 05/1993 edition is transcribed beside it, both verbatim. The mass ladder runs lengths 2 to 20 mm per diameter, ordered by strip thickness s nom. No mandrel, no solid core: the joint is the curled rim, and the open bore through the rivet is often the point (pivots, contacts, lacing).

Standard / scope DIN 7339 hollow rivets, one piece, drawn from strip — d1 1.5 to 6, edition 02/2011; superseded 05/1993 edition transcribed as separate tables
Body geometry Head d2 nom to 10, head side e max 3, burr r max 0.6 at d1 6
Bore / strip Bore d3 0/-0.4 = 5.02 at d1 6 — the through-bore dimension; strip thickness s ±10%, s nom 0.4 at the large end
Commercial lengths Mass ladder (kg per 1000 pcs, ρ=7,85 kg/dm³) l 2 to 20 across d1 1.5–6; ordered by d1 × s nom × length
Not tabulated Strip material/coating, setting force, die data — per RFQ
DIN 7339 hollow rivets, one piece, drawn from strip — 02/2011 edition, geometry by nominal diameter d1Dimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
d1 nomd2 nomd3 0 -0.4e maxs ±10%r max
1.531.0960.750.170.2
23.51.5310.20.2
2.542.011.250.20.25
2.54.51.91.250.250.25
352.491.50.20.3
362.271.50.30.3
46.53.3820.250.4
483.0520.40.4
584.382.50.250.5
5103.832.50.50.5
6105.0230.40.6
  • Source spanning title row carried verbatim: "Dimensions in mm - source DIN 7339 Publication date: 02- 2011 Supersedes DIN 7339 : 05-1993".
DIN 7339 2011 — approximate mass, kg per 1000 pcs (ρ=7,85 kg/dm³), commercial lengthsDimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
d1 nom1.522.52.53344556
s nom0.170.200.200.250.200.300.250.400.250.500.40
length
20.017
2.50.200.032
30.0230.0370.0470.0610.0600.1000.1070.1980.1420.3420.300
3.50.0260.0420.0530.0680.0670.1110.1200.2170.1580.3720.330
40.0290.0470.0590.0760.0750.1220.1330.2360.1740.4020.360
50.0570.0710.0910.0900.1440.1580.2740.2060.4620.420
60.0670.0830.1060.1050.1660.1830.3120.2380.5220.480
70.1210.1200.1880.2080.3500.2700.5820.540
80.1360.1350.2100.2330.3880.3020.6420.600
90.2320.2580.4260.3340.7020.660
100.2540.2830.4640.3660.7620.720
120.2980.5400.8820.840
150.6541.061.020
18
20
  • Source spanning title row carried verbatim: "DIN 7339 2011 Approximate mass, in kg x1000 pcs, (ρ=7,85 kg/dm 3 )".
  • Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (12/1/2/3) — grid padded empty; per-row pre-pad widths: 12,12,12,1,2,3,12,12,12,12,12,12,12,12,12,12,12,1,1.
DIN 7339 hollow rivets — superseded 05/1993 edition, geometry by nominal diameter d1Dimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
d1 nomd2 nomd3 0 -0.4e maxs ±10%r max
1.531.0960.750.170.2
23.51.5310.20.2
2.542.011.250.20.25
2.54.51.91.250.250.25
352.491.50.20.3
362.271.50.30.3
46.53.3820.250.4
483.0520.40.4
584.382.50.250.5
5103.832.50.50.5
6105.0230.40.6
  • Source spanning title row carried verbatim: "Dimensions in mm - source DIN 7339 Publication date: 05-1993".
DIN 7339 1993 (superseded) — approximate mass, kg per 1000 pcs, commercial lengthsDimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
d1 nom1.522.52.53344556
s nom0.170.200.200.250.200.300.250.400.250.500.40
length
20.017
2.50.200.032
30.0230.0370.0470.0610.0600.1000.1070.1980.1420.3420.300
3.50.0260.0420.0530.0680.0670.1110.1200.2170.1580.3720.330
40.0290.0470.0590.0760.0750.1220.1330.2360.1740.4020.360
50.0570.0710.0910.0900.1440.1580.2740.2060.4620.420
60.0670.0830.1060.1050.1660.1830.3120.2380.5220.480
70.1210.1200.1880.2080.3500.2700.5820.540
80.1360.1350.2100.2330.3880.3020.6420.600
90.2320.2580.4260.3340.7020.660
100.2540.2830.4640.3660.7620.720
120.2980.5400.8820.840
150.6541.061.020
18
20
  • Source spanning title row carried verbatim: "DIN 7339 1993 Approximate mass, in kg x1000 pcs, (ρ=7,85 kg/dm 3 )".
  • Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (12/1/2/3) — grid padded empty; per-row pre-pad widths: 12,12,12,1,2,3,12,12,12,12,12,12,12,12,12,12,12,1,1.

Materials

  • Drawn from strip means the material is the coil: brass and copper strip for electrical work (the bore takes contacts), tinned or galvanized steel for general light work, aluminium for weight-critical small assemblies. Order as d1 × s nom × length — the strip thickness is a first-class order dimension here, not a hidden tolerance, and the ±10% band in the table is what the setting force calculation uses

Ordering & documentation

Documents

Shipments of DIN 7339 Hollow Rivets, One Piece, Drawn from Strip are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 7339 Hollow Rivets, One Piece, Drawn from Strip orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 7339 Hollow Rivets, One Piece, Drawn from Strip), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for din 7339 hollow rivets, one piece, drawn from strip is 10,000–50,000 pieces depending on size (applies to the standard sizes and finishes for din 7339 hollow rivets, one piece, drawn from strip; mixed, special or custom variants are quoted — final commercial terms per quotation) Standard production for din 7339 hollow rivets, one piece, drawn from strip run 10–20 days. Quantities or variants of din 7339 hollow rivets, one piece, drawn from strip outside the standard range are confirmed at quotation.

Storage & shipping

DIN 7339 Hollow Rivets, One Piece, Drawn from Strip are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 7339 hollow rivets, one piece, drawn from strip dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why would I use a strip-drawn hollow rivet instead of a semi-tubular one?

Cost and the open bore. Both set by curling, but DIN 7339 is drawn complete from a strip of thickness s — no machined or punched cavity — so at small sizes it is the least expensive tubular rivet per piece, in exactly the volumes electrical and small-hinge work runs. The fully open bore is the second reason: a pin, contact or thread passes straight through, which is why the d3 0/-0.4 bore column is printed with its own tolerance — it is a working diameter, not a leftover. What it gives up is strength: the wall is the strip thickness (±10%), so structural or shear-loaded joints step up to the semi-tubular DIN 6791/6792 class or solid rivets.

What does the ±10% on strip thickness s mean for setting and ordering?

It is the only wall dimension the rivet has, so it carries both the spring of the curl and the strength of the joint: order by the s nom value in the table (0.4 at the 6 mm end) and expect the delivered wall anywhere in ±10% of it — the standard's own band, carried verbatim. For setting force, size the die around the nominal s and let the band be the variation; for joints at the limit of the rivet's capacity, specify the tighter half of the band on the order (we quote against it) or step up a diameter. The bore d3 moves opposite to s within the same outer d1, which is why contact-fit applications state which dimension governs — the bore tolerance 0/-0.4 stays fixed either way.

What is the MOQ and lead time for DIN 7339 Hollow Rivets, One Piece, Drawn from Strip?

Orders under this designation have a minimum order quantity of 10,000–50,000 pieces depending on size. Standard production ships in 10–20 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 7339 Hollow Rivets, One Piece, Drawn from Strip state?

State the full designation (DIN 7339 Hollow Rivets, One Piece, Drawn from Strip), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 7339 Hollow Rivets, One Piece, Drawn from Strip inquiry

  • ✓ Identify blind, solid or structural rivet type and the applicable product standard.
  • ✓ Give rivet-body diameter and grip range for the complete material stack, plus the prepared-hole size.
  • ✓ Specify head style/clearance and state body and mandrel materials separately for blind rivets.
  • ✓ For load-bearing joints, provide required rivet-specific tensile and shear values; do not substitute a bolt property class.
  • ✓ State finish, quantity, destination and any lot-test or traceability documents required.
  • ✓ Factory-direct pricing for your DIN 7339 Hollow Rivets, One Piece, Drawn from Strip
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.