Open-End Blind Rivets (DIN 7337 dimensions; ISO 15977 specified variant)
Open-end break-mandrel blind rivets with subtype-specific standards and manufacturer series. DIN 7337 dimensions are shown as a separate dimensional reference. ISO 15977 applies only to protruding-head rivets with an aluminum body, steel mandrel and nominal diameter 2.4–6.4 mm; countersunk, large-flange, steel/stainless-body and stainless-mandrel variants require their own applicable standard or manufacturer data.
Last updated: 2026-11
Specifications
The open-end blind rivet is a one-sided break-mandrel fastener: a tubular body is set from one side when the back of the joint cannot be reached. The mandrel is drawn into the body with a rivet gun, expanding the blind end and snapping the mandrel off. Keep the standards separate when specifying it: the DIN 7337 dimensional table below is a collected dimensional reference; ISO 15977:2002 is limited to protruding-head open-end blind rivets with an aluminum body, steel mandrel and nominal diameters 2.4–6.4 mm; ISO 15978:2002 is the corresponding countersunk-head variant with aluminum body, steel mandrel and nominal diameters 2.4–5.0 mm. Other body/mandrel materials and large-flange or proprietary head variants must be checked against their own manufacturer series and must not inherit either ISO claim. Select by exact body diameter, grip range, head form and material pairing. Open-end construction leaves the set rivet hollow through the center — where the hole must stay sealed or the joint watertight, consider a closed-end rivet.
| DIN 7337 dimensional reference | The dimensional table below is transcribed from the collected DIN 7337 reference; confirm the applicable edition and exact manufacturer line against the drawing. |
|---|---|
| ISO 15977:2002 scope | Open-end blind rivets with break-pull mandrel and protruding head; aluminum alloy body, steel mandrel; nominal diameter 2.4–6.4 mm. Claim conformity only when all these conditions match. |
| ISO 15978:2002 scope | Open-end blind rivets with break-pull mandrel and countersunk head; aluminum alloy body, steel mandrel; nominal diameter 2.4–5.0 mm. Claim conformity only when all these conditions match. |
| Other material/head variants | Steel or stainless bodies, stainless mandrels, large-flange heads and proprietary variants require a matching manufacturer specification or other applicable standard; do not inherit ISO 15977 / ISO 15978 conformity. |
| DIN 7337 dimensions | Body d1 2.4–6.4 mm (tolerances +0.08/−0.1 to +0.08/−0.15); head diameter d2 5–13 mm; head height k 0.55–1.8 mm; r max 0.2–0.5 mm — series limits per the collected DIN 7337 table |
| DIN 7337 joint hole (d3 nom) | d1 2.4 / 3 / 3.2 / 4 / 4.8 / 5 / 6 / 6.4 mm → hole 2.5 / 3.1 / 3.3 / 4.1 / 4.9 / 5.1 / 6.1 / 6.5 mm |
| DIN 7337 minimum shear | At d1 4.8 mm: aluminium 1400 N, steel 2400 N, A2 stainless 3800 N; at 6.4 mm: aluminium 2800 N, steel 3600 N — minimum values per body material |
| DIN 7337 minimum tensile | At d1 4.8 mm: aluminium 1200 N, steel 3000 N, A2 stainless 4500 N; at 6.4 mm: aluminium 2100 N, steel 4000 N — minimum values per body material |
| DIN 7337 grip ranges (aluminium body, sample) | d1 4.8 mm: length 6 → 2–3 mm, 25 → 16–21 mm, 50 → 40–45 mm; d1 6.4 mm: length 12 → 2–6 mm, 25 → 14–18 mm, 50 → 39–44 mm |
| Rivet length tolerance | Rivet length may run 1 mm longer to 0.2 mm shorter (collected DIN 7337 guide) |
| Body diameters (metric) | 2.4, 3.0, 3.2, 4.0, 4.8, 5.0, 6.0, 6.4 mm (series depends on rivet line, material and maker) |
| Trade sizes (inch) | 3/32″, 1/8″, 5/32″, 3/16″, 1/4″ — sampled trade sizes: 32 (3/32″, grip 0.032″–0.125″, length 0.225″); 42 (1/8″, grip 0.063″–0.125″, length 0.250″); 66 (3/16″, grip 0.251″–0.375″, length 0.550″); 816 (1/4″, grip 0.876″–1.000″, length 1.205″/1.245″) |
| Hole & drill size | 3/32″ → #41 drill (0.097″–0.100″); 1/8″ → #30 (0.129″–0.133″); 5/32″ → #20 (0.160″–0.164″); 3/16″ → #11 (0.192″–0.196″); 1/4″ → F (0.257″–0.261″). Metric guidance: hole ≈ 0.1 mm over nominal diameter (e.g. 4.9 mm for 4.8 mm) |
| Grip range | Per trade size — e.g. 1/8″ bodies span 0.032″ to 0.625″ across the length ladder; select so total stack thickness falls inside the published range |
| Length estimate | Body length ≈ total grip thickness + rivet diameter (preliminary estimate; confirm against the selected product data) |
| Head styles | Protruding head within ISO 15977 scope; countersunk within ISO 15978 scope; large flange only where supported by the selected manufacturer series |
| Typical strengths (1/8″ stainless, catalog sheet) | Shear 550 lbf; tensile 700 lbf (3/32″ row: 230 / 320 lbf). Values are catalog typicals, not a design allowables table |
| MOQ / lead time | 10,000–50,000 pieces by size; 10–20 days |
| Body Dia. | Work Hole & Drill | Grip Range (G) | Body Length Max (L) | Head Dia. Nom (B) | Head Ht Max (C) | Shear (lbf) | Tensile (lbf) | Part Numbers (POP® / SSD / Avdel®) |
|---|---|---|---|---|---|---|---|---|
| .094 (3/32) | .097/.100 — #41 | .031-.125 | .250 | .180 | .032 | 230 | 320 | PTSD302 / — / CSPS-03-02 |
| .125 (1/8) | .129/.133 — #30 | .031-.062 | .203 | .250 | .040 | 550 | 700 | PTSD401 / SSD41BS / CSPS-04-01 |
| .125 (1/8) | .129/.133 — #30 | .063-.125 | .265 | .250 | .040 | 550 | 700 | PTSD402 / SSD42BS / CSPS-04-02 |
| .125 (1/8) | .129/.133 — #30 | .126-.187 | .328 | .250 | .040 | 550 | 700 | PTSD403 / SSD43BS / CSPS-04-03 |
| .125 (1/8) | .129/.133 — #30 | .188-.250 | .390 | .250 | .040 | 550 | 700 | PTSD404 / SSD44BS / CSPS-04-04 |
| .125 (1/8) | .129/.133 — #30 | .251-.312 | .453 | .250 | .040 | 550 | 700 | PTSD405 / SSD45BS / CSPS-04-05 |
| .125 (1/8) | .129/.133 — #30 | .313-.375 | .515 | .250 | .040 | 550 | 700 | PTSD406 / SSD46BS / CSPS-04-06 |
| .125 (1/8) | .129/.133 — #30 | .376-.500 | .640 | .250 | .040 | 550 | 700 | PTSD408 / SSD48BS / CSPS-04-08 |
| .156 (5/32) | .160/.164 — #20 | .063-.125 | .290 | .312 | .047 | 900 | 1130 | PTSD502 / SSD52BS / CSPS-05-02 |
| .156 (5/32) | .160/.164 — #20 | .126-.250 | .415 | .312 | .047 | 900 | 1130 | PTSD504 / SSD54BS / CSPS-05-04 |
| .156 (5/32) | .160/.164 — #20 | .251-.375 | .540 | .312 | .047 | 900 | 1130 | PTSD506 / SSD56BS / CSPS-05-06 |
| .187 (3/16) | .192/.196 — #11 | .063-.125 | .315 | .375 | .055 | 1000 | 1375 | PTSD602 / SSD62BS / CSPS-06-02 |
| .187 (3/16) | .192/.196 — #11 | .126-.250 | .440 | .375 | .055 | 1000 | 1375 | PTSD604 / SSD64BS / CSPS-06-04 |
| .187 (3/16) | .192/.196 — #11 | .251-.375 | .565 | .375 | .055 | 1000 | 1375 | PTSD606 / SSD66BS / CSPS-06-06 |
| .187 (3/16) | .192/.196 — #11 | .376-.500 | .690 | .375 | .055 | 1000 | 1375 | PTSD608 / SSD68BS / CSPS-06-08 |
| .187 (3/16) | .192/.196 — #11 | .501-.625 | .815 | .375 | .055 | 1000 | 1375 | PTSD610 / SSD610BS / CSPS-06-10 |
| .250 (1/4) | .257/.261 — F | .020-.250 | .500 | .500 | .069 | 1400 | 1920 | PTSD804 / — / CSPS-08-04 |
| .250 (1/4) | .257/.261 — F | .500-.625 | .865 | .500 | .069 | 1400 | 1920 | PTSD810 / — / CSPS-08-10 |
| .250 (1/4) | .257/.261 — F | .626-.750 | .990 | .500 | .069 | 1400 | 1920 | PTSD812 / — / CSPS-06-12 |
- Row 1 (.094 (3/32)): The 3/32″ block lists only the PTSD and CSPS part numbers — no SSD-series number is printed for 3/32″ in the source.
- Row 17 (.250 (1/4)): The 1/4″ dome block has no SSD-series numbers, and its third Avdel® number prints as CSPS-06-12 (a 06 diameter prefix inside the 1/4″ block) — reproduced verbatim.
- Row 17 (.250 (1/4)): The 1/4″ grip ladder runs .020-.250 then jumps to .500-.625 — dash numbers 06/08 are absent from the source sheet.
- Row 17 (.250 (1/4)): Strengths are the source's "typical ultimate strengths ... a guide only", not design allowables (applies to every row).
| Body Dia. | Work Hole & Drill | Grip Range (G) | Body Length Max (L) | Head Dia. Nom (B) | Head Ht Max (C) | Shear (lbf) | Tensile (lbf) | Part Numbers (POP® / SSD / Avdel®) |
|---|---|---|---|---|---|---|---|---|
| .125 (1/8) | .129/.133 — #30 | .031-.125 | .265 | .375 | .065 | 550 | 700 | PTSL402 / SSD42BSLF / CSLS-04-02 |
| .125 (1/8) | .129/.133 — #30 | .126-.187 | .328 | .375 | .065 | 550 | 700 | PTSL403 / SSD43BSLF / CSLS-04-03 |
| .125 (1/8) | .129/.133 — #30 | .188-.250 | .390 | .375 | .065 | 550 | 700 | PTSL404 / SSD44BSLF / CSLS-04-04 |
| .187 (3/16) | .192/.196 — #11 | .501-.625 | .815 | .625 | .065 | 1000 | 1375 | PTSL610 / SSD610BSLF / CSLS-06-10 |
| .187 (3/16) | .192/.196 — #11 | .626-.750 | .950 | .625 | .065 | 1000 | 1375 | PTSL612 / SSD612BSLF / CSLS-06-12 |
- Row 4 (.187 (3/16)): The 3/16″ large-flange block starts at dash 10 (grip .501-.625) — no 3/16″ rows below that grip are printed in the source.
| Body Dia. | Work Hole & Drill | Grip Range (G) | Body Length Max (L) | Head Dia. (B) | Head Ht (C) | Shear (lbf) | Tensile (lbf) | Part Numbers (POP® / SSK / Avdel®) |
|---|---|---|---|---|---|---|---|---|
| .125 (1/8) | .129/.133 — #30 | .063-.125 | .265 | .220 REF. | .039 MAX | 550 | 700 | PTSK402 / SSK42BS / CSCS-04-02 |
| .125 (1/8) | .129/.133 — #30 | .126-.187 | .328 | .220 REF. | .039 MAX | 550 | 700 | PTSK403 / SSK43BS / CSCS-04-03 |
| .187 (3/16) | .192/.196 — #11 | .126-.250 | .440 | .348 REF. | .063 MAX | 1000 | 1375 | PTSK604 / SSK64BS / CSCS-06-04 |
- Row 3 (.187 (3/16)): The 3/16″ countersunk block lists a single grip row (dash 04) — no .251-.375 or larger row is printed in the source.
| Body Dia. | Work Hole & Drill | Grip Range (G) | Body Length Max (L) | Head Dia. Nom (B) | Head Ht Max (C) | Shear (lbf) | Tensile (lbf) | Part Number (AD) |
|---|---|---|---|---|---|---|---|---|
| .094 (3/32) | .097/.100 — #41 | .031-.125 | .240 | .188 | .032 | 125 | 175 | AD32BS |
| .094 (3/32) | .097/.100 — #41 | .126-.250 | .365 | .188 | .032 | 125 | 175 | AD34BS |
| .118 (metric 3) | .122/.126 — (not printed) | .078-.118 | .236 | .256 | .032 | 179 | 202 | 3 X 6 |
| .118 (metric 3) | .122/.126 — (not printed) | .188-.197 | .315 | .256 | .032 | 179 | 202 | 3 X 8 |
| .125 (1/8) | .129/.133 — #30 | .031-.062 | .203 | .250 | .040 | 210 | 325 | AD41BS |
| .125 (1/8) | .129/.133 — #30 | .063-.125 | .265 | .250 | .040 | 210 | 325 | AD42BS |
| .125 (1/8) | .129/.133 — #30 | .126-.187 | .328 | .250 | .040 | 210 | 325 | AD43BS |
| .125 (1/8) | .129/.133 — #30 | .188-.250 | .390 | .250 | .040 | 210 | 325 | AD44BS |
| .125 (1/8) | .129/.133 — #30 | .251-.312 | .453 | .250 | .040 | 210 | 325 | AD45BS |
| .125 (1/8) | .129/.133 — #30 | .313-.375 | .515 | .250 | .040 | 210 | 325 | AD46BS |
| .125 (1/8) | .129/.133 — #30 | .376-.500 | .640 | .250 | .040 | 210 | 325 | AD48BS |
| .125 (1/8) | .129/.133 — #30 | .501-.625 | .765 | .250 | .040 | 210 | 325 | AD410BS |
| .156 (5/32) | .160/.164 — #20 | .063-.125 | .290 | .312 | .047 | 340 | 490 | AD52BS |
| .156 (5/32) | .160/.164 — #20 | .126-.187 | .353 | .312 | .047 | 340 | 490 | AD53BS |
| .156 (5/32) | .160/.164 — #20 | .188-.250 | .415 | .312 | .047 | 340 | 490 | AD54BS |
| .156 (5/32) | .160/.164 — #20 | .251-.375 | .540 | .312 | .047 | 340 | 490 | AD56BS |
| .156 (5/32) | .160/.164 — #20 | .376-.500 | .665 | .312 | .047 | 340 | 490 | AD58BS |
| .156 (5/32) | .160/.164 — #20 | .501-.625 | .770 | .312 | .047 | 340 | 490 | AD510BS |
| .187 (3/16) | .192/.196 — #11 | .063-.125 | .315 | .375 | .055 | 445 | 720 | AD62BS |
| .187 (3/16) | .192/.196 — #11 | .126-.250 | .440 | .375 | .055 | 445 | 720 | AD64BS |
| .187 (3/16) | .192/.196 — #11 | .251-.375 | .565 | .375 | .055 | 445 | 720 | AD66BS |
| .187 (3/16) | .192/.196 — #11 | .376-.500 | .690 | .375 | .055 | 445 | 720 | AD68BS |
| .187 (3/16) | .192/.196 — #11 | .501-.625 | .815 | .375 | .055 | 445 | 720 | AD610BS |
| .187 (3/16) | .192/.196 — #11 | .626-.750 | .940 | .375 | .055 | 445 | 720 | AD612BS |
| .187 (3/16) | .192/.196 — #11 | .751-.875 | 1.065 | .375 | .055 | 445 | 720 | AD614BS |
| .187 (3/16) | .192/.196 — #11 | .876-1.00 | 1.190 | .375 | .055 | 445 | 720 | AD616BS |
| .250 (1/4) | .257/.261 — F | .063-.250 | .490 | .500 | .073 | 890 | 1200 | AD84BS |
| .250 (1/4) | .257/.261 — F | .251-.375 | .615 | .500 | .073 | 890 | 1200 | AD86BS |
| .250 (1/4) | .257/.261 — F | .376-.500 | .740 | .500 | .073 | 890 | 1200 | AD88BS |
| .250 (1/4) | .257/.261 — F | .501-.625 | .865 | .500 | .073 | 890 | 1200 | AD810BS |
| .250 (1/4) | .257/.261 — F | .626-.750 | .990 | .500 | .073 | 890 | 1200 | AD812BS |
| .250 (1/4) | .257/.261 — F | .751-1.00 | 1.240 | .500 | .073 | 890 | 1200 | AD816BS |
- Row 3 (.118 (metric 3)): Rows 3 X 6 / 3 X 8 are metric-designated lines inside the inch ladder: no drill size is printed, and the grip windows (.078-.118, .188-.197) do not follow the inch dash-number ladder — reproduced verbatim.
- Row 27 (.250 (1/4)): Strengths are the source's "typical ultimate strengths ... a guide only", not design allowables (applies to every row).
| Body Dia. | Work Hole & Drill | Grip Range (G) | Body Length Max (L) | Head Dia. Nom (B) | Head Ht Max (C) | Shear (lbf) | Tensile (lbf) | Part Number (AD) |
|---|---|---|---|---|---|---|---|---|
| .125 (1/8) | .129/.133 — #30 | .031-.125 | .265 | .375 | .045 | 210 | 325 | AD42BSLF |
| .125 (1/8) | .129/.133 — #30 | .126-.187 | .328 | .375 | .045 | 210 | 325 | AD43BSLF |
| .125 (1/8) | .129/.133 — #30 | .188-.250 | .390 | .375 | .045 | 210 | 325 | AD44BSLF |
| .125 (1/8) | .129/.133 — #30 | .251-.312 | .438 | .375 | .045 | 210 | 325 | AD45BSLF |
| .125 (1/8) | .129/.133 — #30 | .251-.375 | .515 | .375 | .045 | 210 | 325 | AD46BSLF |
| .156 (5/32) | .160/.164 — #20 | .126-.250 | .415 | .468 | .075 | 340 | 490 | AD54BSLF |
| .187 (3/16) | .192/.196 — #11 | .063-.125 | .315 | .625 | .092 | 445 | 720 | AD62BSLF |
| .187 (3/16) | .192/.196 — #11 | .063-.250 | .450 | .625 | .092 | 445 | 720 | AD64BSLF |
| .187 (3/16) | .192/.196 — #11 | .251-.375 | .565 | .625 | .092 | 445 | 720 | AD66BSLF |
| .187 (3/16) | .192/.196 — #11 | .376-.500 | .690 | .625 | .092 | 445 | 720 | AD68BSLF |
| .187 (3/16) | .192/.196 — #11 | .501-.625 | .815 | .625 | .092 | 445 | 720 | AD610BSLF |
| .187 (3/16) | .192/.196 — #11 | .626-.750 | .940 | .625 | .092 | 445 | 720 | AD612BSLF |
| .187 (3/16) | .192/.196 — #11 | .751-.875 | 1.065 | .625 | .092 | 445 | 720 | AD614BSLF |
| .187 (3/16) | .192/.196 — #11 | .876-1.00 | 1.190 | .625 | .092 | 445 | 720 | AD616BSLF |
| .187 (3/16) | .192/.196 — #11 | 1.01-1.125 | 1.325 | .625 | .092 | 445 | 720 | AD618BSLF |
- Row 4 (.125 (1/8)): The 1/8″ large-flange grip ladder prints both .251-.312 and .251-.375 for consecutive dash numbers (45/46) — overlapping windows reproduced verbatim.
- Row 7 (.187 (3/16)): The 3/16″ large-flange ladder prints .063-.125 and .063-.250 for dash 02/04 and 1.01-1.125 for dash 18 — ranges wider than the dome ladder of the same diameter, verbatim.
| Body Dia. | Work Hole & Drill | Grip Range (G) | Body Length Max (L) | Head Dia. (B) | Head Ht (C) | Shear (lbf) | Tensile (lbf) | Part Number (AK) |
|---|---|---|---|---|---|---|---|---|
| .094 (3/32) | .097/.100 — #41 | .031-.125 | .250 | .188 | .032 | 125 | 175 | AK32BS |
| .094 (3/32) | .097/.100 — #41 | .126-.250 | .375 | .188 | .032 | 125 | 175 | AK34BS |
| .125 (1/8) | .129/.133 — #30 | .063-.125 | .265 | .220 | .035 | 210 | 325 | AK42BS |
| .125 (1/8) | .129/.133 — #30 | .126-.187 | .328 | .220 | .035 | 210 | 325 | AK43BS |
| .125 (1/8) | .129/.133 — #30 | .188-.250 | .390 | .220 | .035 | 210 | 325 | AK44BS |
| .125 (1/8) | .129/.133 — #30 | .251-.312 | .453 | .220 | .035 | 210 | 325 | AK45BS |
| .125 (1/8) | .129/.133 — #30 | .313-.375 | .515 | .220 | .035 | 210 | 325 | AK46BS |
| .125 (1/8) | .129/.133 — #30 | .376-.500 | .640 | .220 | .035 | 210 | 325 | AK48BS |
| .156 (5/32) | .160/.164 — #20 | .063-.125 | .290 | .281 | .040 | 340 | 490 | AK52BS |
| .156 (5/32) | .160/.164 — #20 | .126-.250 | .415 | .281 | .040 | 340 | 490 | AK54BS |
| .156 (5/32) | .160/.164 — #20 | .251-.375 | .540 | .281 | .040 | 340 | 490 | AK56BS |
| .187 (3/16) | .192/.196 — #11 | .126-.250 | .440 | .348 | .050 | 445 | 720 | AK64BS |
| .187 (3/16) | .192/.196 — #11 | .251-.375 | .565 | .348 | .050 | 445 | 720 | AK66BS |
| .187 (3/16) | .192/.196 — #11 | .376-.500 | .690 | .348 | .050 | 445 | 720 | AK68BS |
- Row 3 (.125 (1/8)): Strengths are the source's "typical ultimate strengths ... a guide only", not design allowables (applies to every row).
Materials
- Aluminum body / steel mandrel
- Aluminum body / aluminum mandrel
- Steel body / steel mandrel
- Stainless steel body / steel mandrel
- Stainless steel body / stainless steel mandrel
Ordering & documentation
Documents
Shipments of Open-End Blind Rivets (DIN 7337 dimensions; ISO 15977 specified variant) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Open-End Blind Rivets (DIN 7337 dimensions; ISO 15977 specified variant) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (Open-End Blind Rivets (DIN 7337 dimensions; ISO 15977 specified variant)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for open-end blind rivets (din 7337 dimensions; iso 15977 specified variant) is 10,000–50,000 pieces depending on size (applies to the standard sizes and finishes for open-end blind rivets (din 7337 dimensions; iso 15977 specified variant); mixed, special or custom variants are quoted — final commercial terms per quotation) Standard production for open-end blind rivets (din 7337 dimensions; iso 15977 specified variant) run 10–20 days. Quantities or variants of open-end blind rivets (din 7337 dimensions; iso 15977 specified variant) outside the standard range are confirmed at quotation.
Storage & shipping
Open-End Blind Rivets (DIN 7337 dimensions; ISO 15977 specified variant) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store open-end blind rivets (din 7337 dimensions; iso 15977 specified variant) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
What does the DIN 7337 designation give me when ordering open-end blind rivets?
The DIN 7337 dimensional reference below lists body diameter, head and joint-hole dimensions, plus collected minimum shear/tensile values. ISO 15977 is narrower: use it only for protruding-head open-end blind rivets with an aluminum body, steel mandrel and 2.4–6.4 mm nominal diameter. For countersunk heads, check ISO 15978 and its 2.4–5.0 mm aluminum-body/steel-mandrel scope. For other body or mandrel materials and large-flange heads, quote the exact manufacturer series and do not infer ISO conformity from the DIN 7337 reference table.
Open end or closed end — which blind rivet do I need?
Decide by what the finished hole must do. An open-end rivet sets fastest and carries the full size ladder, but the set rivet stays hollow through the center — the mandrel channel is open to the outside. If the joint must hold water, dust or pressure, a closed-end rivet seals the body so nothing passes through. For ordinary sheet-metal joints where the hole is not a leakage path, the open-end rivet remains the economical default; size it by grip range — the total stack thickness must sit inside the published range, not at its edge.
Why does the body-and-mandrel material pairing matter?
The body and mandrel do different jobs: the body clamps the sheets and survives the environment, the mandrel only has to survive the set. That is why aluminum body with steel mandrel is the common general-purpose pairing — light, corrosion-resistant head side with enough mandrel strength to set reliably. All-stainless pairs the corrosion resistance on both sides for wash-down or outdoor joints but sets stiffer. Mixed pairs also set a galvanic order — match the body to the thinner or more corrosion-prone sheet so the rivet does not become the anode in the stack.
What is the MOQ and lead time for these rivets?
Minimum order quantity is 10,000–50,000 pieces depending on size and material. Standard production lead time is 10–20 days. Common blind rivet sizes are widely stocked — confirm the exact schedule against quantity and size mix at quotation.
What should an RFQ for these rivets state?
State the rivet subtype (open-end, closed-end, structural blind rivet or rivet nut), body diameter, grip range or total material thickness, head style (dome, countersunk or large flange), body and mandrel materials (for example aluminum body with steel mandrel, or all-stainless), finish, required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your Open-End Blind Rivets (DIN 7337 dimensions; ISO 15977 specified variant) inquiry
- ✓ Identify blind, solid or structural rivet type and the applicable product standard.
- ✓ Give rivet-body diameter and grip range for the complete material stack, plus the prepared-hole size.
- ✓ Specify head style/clearance and state body and mandrel materials separately for blind rivets.
- ✓ For load-bearing joints, provide required rivet-specific tensile and shear values; do not substitute a bolt property class.
- ✓ State finish, quantity, destination and any lot-test or traceability documents required.
- ✓ Factory-direct pricing for your Open-End Blind Rivets (DIN 7337 dimensions; ISO 15977 specified variant)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support