IFI 134 Multi-Grip Blind Rivets, 100° Countersunk Head (Flush Break, Pull Mandrel)

IFI 134-2003 100° countersunk head multi-grip flush break pull mandrel self-plugging blind rivets: inch nominal sizes 3/16 and 1/4 with shank/head/mandrel diameters, minimum grip and the L2 mandrel-protrusion formula.

Last updated: 2026-11

Request a Quote

IFI 134 Multi-Grip Blind Rivets, 100° Countersunk Head (Flush Break, Pull Mandrel) in an industrial setting
Illustrative image redrawn from real IFI 134 Multi-Grip Blind Rivets, 100° Countersunk Head (Flush Break, Pull Mandrel) product references — not a photograph of stocked items.

Specifications

IFI 134 is the inch-series standard for the multi-grip flush-break blind rivet with a 100° countersunk head — the type whose body folds into multiple stacked profiles as it sets, so one rivet covers a wide grip band instead of a single thickness. The "flush break" in the title is the setting behaviour: the mandrel breaks level with the countersunk head, leaving the hole ready for painting or a second part over the rivet without a proud stub. The collected 2003-edition table carries two nominal sizes, 3/16 and 1/4 (d max/min 0.193/0.184 and 0.260/0.254 in), countersunk head diameters dk max/min (0.360/0.325 and 0.448/0.395), head height k max/min 0.07/0.079, mandrel d1 max/min (0.120/0.114 and 0.162/0.153), minimum grip L1 1 in for both sizes, and the mandrel L2 max printed as the source's own formula on the rivet length L: L+0.426 (3/16) and L+0.540 (1/4) — carried verbatim, a formula not a fixed number. The multi-grip capability is the design point: the folded body tolerates variation in the stack-up that would leave a single-grip rivet either loose or unseated, which is why these are the default call-out for mixed-thickness assemblies and repair work.

Standard / scope IFI 134-2003 100° countersunk head multi-grip flush break pull mandrel self-plugging blind rivets — inch series, nominal sizes 3/16 and 1/4 as tabulated
Shank d max/min 0.193/0.184 (3/16), 0.260/0.254 (1/4) — the size identification, read vertically
Countersunk head dk / height k dk max/min 0.360/0.325 (3/16), 0.448/0.395 (1/4); k max/min 0.07 (3/16), 0.079 (1/4)
Mandrel d1 max/min 0.120/0.114 (3/16), 0.162/0.153 (1/4)
Grip L1 min / mandrel L2 max L1 min 1 in for both sizes; L2 max prints as a formula on the rivet length L: L+0.426 (3/16), L+0.540 (1/4) — verbatim from the source
Not tabulated Load/shear ratings, grip-range ladder per size, material and finish calls — per RFQ
IFI 134-2003 100° countersunk head multi-grip flush break pull mandrel self-plugging blind rivets — attribute ladder by sizeInch dimensions. The source prints an attribute-label grid positionally paired with a numeric grid; merged rows carry the label cells verbatim followed by the values. Sizes are inch nominal 3/16 and 1/4, read vertically. The L 2 max row prints as a formula on L (L+0.426 / L+0.540), verbatim.
AttributeSub-label
dNominal Size3/161/4
dmax0.1930.260
dmin0.1840.254
d kmax0.3600.448
d kmin0.3250.395
kkk0.070.079
d 1max0.1200.162
d 1min0.1140.153
L 1min11
L 2maxL+0.426L+0.540
  • The label grid alternates two-cell rows (attribute + sub-label) and one three-cell row (k prints its label across all three cells) — source rows carry differing non-empty cell counts (2/3), grid padded empty. Duplicated label cells carried verbatim; the L 2 max row is a printed formula, not a numeric.

Materials

  • As with IFI 130, the collected page prints geometry only — no material, finish or load rows — so the body/mandrel pairing and any finish are confirmed per order, not claimed from the table. Multi-grip rivets are ordered by the grip band you need covered: state the minimum and maximum total thickness the joint can see (including tolerance stack), the 100° countersink preparation on the outer sheet, and the head flushness requirement. Lead time, MOQ and price: contact for confirmation.

Ordering & documentation

Documents

Shipments of IFI 134 Multi-Grip Blind Rivets, 100° Countersunk Head (Flush Break, Pull Mandrel) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for IFI 134 Multi-Grip Blind Rivets, 100° Countersunk Head (Flush Break, Pull Mandrel) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (IFI 134 Multi-Grip Blind Rivets, 100° Countersunk Head (Flush Break, Pull Mandrel)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for ifi 134 multi-grip blind rivets, 100° countersunk head (flush break, pull mandrel) is 10,000–50,000 pieces depending on size (applies to the standard sizes and finishes for ifi 134 multi-grip blind rivets, 100° countersunk head (flush break, pull mandrel); mixed, special or custom variants are quoted — final commercial terms per quotation) Standard production for ifi 134 multi-grip blind rivets, 100° countersunk head (flush break, pull mandrel) run 10–20 days. Quantities or variants of ifi 134 multi-grip blind rivets, 100° countersunk head (flush break, pull mandrel) outside the standard range are confirmed at quotation.

Storage & shipping

IFI 134 Multi-Grip Blind Rivets, 100° Countersunk Head (Flush Break, Pull Mandrel) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store ifi 134 multi-grip blind rivets, 100° countersunk head (flush break, pull mandrel) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

"Multi-grip" — how much grip range does one rivet actually cover?

The collected IFI 134 table does not print the per-size grip-range ladder, so we do not quote a generic band from it — the honest answer comes from the manufacturer's chart for the exact body length and size, confirmed per order. What the standard does fix is the geometry that makes the wide band possible: the folding body profile and the flush-break mandrel (L2 max expressed as L+0.426 / L+0.540 on the rivet length). Send the thinnest and thickest stack-up the joint can see and we match the rivet to that band — ordering multi-grip rivets against a single thickness defeats their point, and ordering them without the band risks a rivet that never seats.

How does the 100° countersunk head differ from the countersunk ISO rivets on the metric pages?

Angle and system. IFI 134 prints a 100° countersink in its own title — an inch-system convention — while the metric countersunk blind-rivet identities in this family (ISO 15980, ISO 16583) are separate standards with their own head geometry, tabulated on their pages. The angle is the practical trap: a countersink prepared to one standard's angle will not seat a rivet cut to the other's — the head lands on the cone edge and never flushes. Match the countersink tool to the rivet standard, not the other way round; and note the multi-grip type is also a different mechanical design (the folding body) from the single-grip ISO open-end rivets, so a drawing that says multi-grip or IFI 134 is calling for this behaviour specifically, not just for a flush head.

What is the MOQ and lead time for IFI 134 Multi-Grip Blind Rivets, 100° Countersunk Head (Flush Break, Pull Mandrel)?

Orders under this designation have a minimum order quantity of 10,000–50,000 pieces depending on size. Standard production ships in 10–20 days. Final commercial terms are confirmed per quotation.

What should an RFQ for IFI 134 Multi-Grip Blind Rivets, 100° Countersunk Head (Flush Break, Pull Mandrel) state?

State the full designation (IFI 134 Multi-Grip Blind Rivets, 100° Countersunk Head (Flush Break, Pull Mandrel)), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your IFI 134 Multi-Grip Blind Rivets, 100° Countersunk Head (Flush Break, Pull Mandrel) inquiry

  • ✓ Identify blind, solid or structural rivet type and the applicable product standard.
  • ✓ Give rivet-body diameter and grip range for the complete material stack, plus the prepared-hole size.
  • ✓ Specify head style/clearance and state body and mandrel materials separately for blind rivets.
  • ✓ For load-bearing joints, provide required rivet-specific tensile and shear values; do not substitute a bolt property class.
  • ✓ State finish, quantity, destination and any lot-test or traceability documents required.
  • ✓ Factory-direct pricing for your IFI 134 Multi-Grip Blind Rivets, 100° Countersunk Head (Flush Break, Pull Mandrel)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.