DIN 6791 Semi-Tubular Pan Head Rivets
DIN 6791 semi-tubular pan head rivets, d 1.6 to 10: head geometry with js14/H13 tolerances, cavity depth, and the commercial-length mass ladder to 50 mm.
Last updated: 2026-11
Specifications
DIN 6791 is the semi-tubular rivet with pan head — the self-piercing-class fastener of leather, belt, textile and light metal work: the hollow cavity end rolls outward under the setter and clamps without full shank upsetting, at a fraction of the force a solid rivet needs. The collected 05/2012-edition table runs d 1.6 to 10 with head diameter dk nom (20 at d10), head height k js14 (4.4), cavity depth t +0.5/0 (10), cavity diameter d4 H13 (7.6) and material min d3 (9.4) — the tolerance designations (js14 on the head, H13 on the cavity) are part of the print and tell the toolmaker what the setting die must hold. The mass ladder runs lengths 3 to 50 mm per diameter; the superseded 1993 geometry/mass pair is transcribed beside the current edition, both verbatim.
| Standard / scope | DIN 6791 semi-tubular pan head rivets — d 1.6 to 10, edition 05/2012; superseded 05/1993 edition transcribed as separate tables |
|---|---|
| Head geometry | dk nom to 20, k js14 4.4 at d 10 — js14 head tolerance as printed |
| Cavity geometry | Cavity depth t +0.5/0 to 10, cavity diameter d4 H13 7.6, material min d3 9.4 — the H13 cavity is the die-side dimension |
| Commercial lengths | Mass ladder (kg per 1000 pcs, ρ=7,85 kg/dm³) l 3 to 50 across d 1.6–10, current and 1993 editions |
| Not tabulated | Material (steel/Cu/brass/Al), temper, setting force and die data — per RFQ |
| d nom | dk nom | k js14 | t +0.5 0 | d4 H13 | d3 min |
|---|---|---|---|---|---|
| 1.6 | 3.2 | 0.7 | 1.5 | 0.9 | 1.52 |
| 2 | 4 | 0.9 | 2.5 | 1.2 | 1.87 |
| 2.5 | 5 | 1.1 | 2.5 | 1.7 | 2.37 |
| 3 | 6 | 1.3 | 3 | 1.9 | 2.87 |
| 3.5 | 7 | 1.5 | 4 | 2.2 | 3.37 |
| 4 | 8 | 1.8 | 4 | 2.7 | 3.87 |
| 5 | 10 | 2.2 | 5 | 3.5 | 4.82 |
| 6 | 12 | 2.6 | 6.5 | 4.2 | 5.82 |
| 8 | 16 | 3.5 | 8 | 6 | 7.76 |
| 10 | 20 | 4.4 | 10 | 7.6 | 9.4 |
- Source spanning title row carried verbatim: "Dimensions in mm - source DIN 6791 Publication date: 05-2012 Supersedes DIN 6971 : 05-1993".
| d thread size | 1.6 | 2 | 2.5 | 3 | 3.5 | 4 | 5 | 6 | 8 | 10 | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| nominal length l | |||||||||||||||
| 3 | 0.068 | 0.108 | 0.179 | ||||||||||||
| 4 | 0.084 | 0.132 | 0.217 | 0.339 | |||||||||||
| 5 | 0.1 | 0.157 | 0.256 | 0.395 | 0.55 | 0.766 | |||||||||
| 6 | 0.115 | 0.181 | 0.294 | 0.45 | 0.626 | 0.865 | 1.41 | ||||||||
| 8 | 0.147 | 0.231 | 0.371 | 0.561 | 0.777 | 1.06 | 1.72 | 2.55 | |||||||
| 10 | 0.179 | 0.28 | 0.448 | 0.672 | 0.928 | 1.26 | 2.03 | 2.99 | 5.69 | ||||||
| 12 | 0.21 | 0.329 | 0.525 | 0.783 | 1.08 | 1.46 | 2.33 | 3.44 | 6.48 | 10.78 | |||||
| 14 | 0.242 | 0.378 | 0.602 | 0.894 | 1.23 | 1.65 | 2.64 | 3.88 | 7.27 | 12.02 | |||||
| 16 | 0.273 | 0.427 | 0.679 | 1.01 | 1.38 | 1.85 | 2.95 | 4.32 | 8.05 | 13.26 | |||||
| 20 | 0.337 | 0.526 | 0.833 | 1.23 | 1.68 | 2.25 | 3.57 | 5.21 | 9.63 | 15.7 | |||||
| 25 | 0.416 | 0.649 | 1.03 | 1.5 | 2.06 | 2.74 | 4.34 | 6.3 | 11.6 | 18.8 | |||||
| 30 | 0.495 | 0.772 | 1.22 | 1.78 | 2.44 | 3.23 | 5.11 | 7.43 | 13.6 | 21.9 | |||||
| 35 | 0.574 | 0.895 | 1.41 | 2.06 | 2.82 | 3.72 | 5.88 | 8.54 | 15.5 | 25 | |||||
| 40 | 0.653 | 1.018 | 1.6 | 2.34 | 3.19 | 4.22 | 6.65 | 9.65 | 17.5 | 28.1 | |||||
| 45 | 0.732 | 1.141 | 1.8 | 2.61 | 3.57 | 4.71 | 7.42 | 10.8 | 19.5 | 31.2 | |||||
| 50 | 0.811 | 1.264 | 1.99 | 2.89 | 3.95 | 5.2 | 8.19 | 11.9 | 21.4 | 34.3 |
- Source spanning title row carried verbatim: "DIN 6791 2012 ≈ weight in kg x1000 pcs, (ρ=7,85 kg/dm 3 )".
- Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (16/11/1/4/5/7/8/9/10) — grid padded empty; per-row pre-pad widths: 16,11,1,4,5,7,8,9,10,11,11,11,11,11,11,11,11,11,11.
| d nom | dk nom | k js14 | t +0.5 0 | d4 H13 | d3 min |
|---|---|---|---|---|---|
| 1.6 | 3.2 | 0.7 | 1.5 | 0.9 | 1.52 |
| 2 | 4 | 0.9 | 2.5 | 1.2 | 1.87 |
| 2.5 | 5 | 1.1 | 2.5 | 1.7 | 2.37 |
| 3 | 6 | 1.3 | 3 | 1.9 | 2.87 |
| 3.5 | 7 | 1.5 | 4 | 2.2 | 3.37 |
| 4 | 8 | 1.8 | 4 | 2.7 | 3.87 |
| 5 | 10 | 2.2 | 5 | 3.5 | 4.82 |
| 6 | 12 | 2.6 | 6.5 | 4.2 | 5.82 |
| 8 | 16 | 3.5 | 8 | 6 | 7.76 |
| 10 | 20 | 4.4 | 10 | 7.6 | 9.4 |
- Source spanning title row carried verbatim: "Dimensions in mm - source DIN 6791 Publication date: 05-1993".
| d thread size | 1.6 | 2 | 2.5 | 3 | 3.5 | 4 | 5 | 6 | 8 | 10 | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| nominal length l | |||||||||||||||
| 3 | 0.063 | ||||||||||||||
| 4 | 0.079 | 0.124 | 0.200 | ||||||||||||
| 5 | 0.095 | 0.148 | 0.238 | 0.364 | |||||||||||
| 6 | 0.173 | 0.277 | 0.419 | 0.574 | 0.791 | ||||||||||
| 8 | 0.222 | 0.354 | 0.530 | 0.725 | 0.988 | 1.58 | |||||||||
| 10 | 0.272 | 0.431 | 0.641 | 0.876 | 1.19 | 1.89 | 2.74 | ||||||||
| 12 | 0508 | 0.752 | 1.03 | 1.38 | 2.19 | 3.18 | 5.9 | ||||||||
| 14 | 0.863 | 1.18 | 1.58 | 2.5 | 3.63 | 6.69 | |||||||||
| 16 | 0.974 | 1.33 | 1.78 | 2.81 | 4.07 | 7.48 | 12.1 | ||||||||
| 20 | 1.63 | 2.17 | 3.43 | 4.96 | 9.05 | 14.5 | |||||||||
| 25 | 4.2 | 6.07 | 11 | 17.6 | |||||||||||
| 30 | 7.18 | 13 | 20.7 | ||||||||||||
| 35 | 15 | 23.8 | |||||||||||||
| 40 | 16.9 | 26.9 | |||||||||||||
| 45 | 30 | ||||||||||||||
| 50 | 33 |
- Source spanning title row carried verbatim: "DIN 6791 1993 ≈ weight in kg x1000 pcs, (ρ=7,85 kg/dm 3 )".
- Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (16/11/1/2/4/5/6/7/9/10) — grid padded empty; per-row pre-pad widths: 16,11,1,2,4,5,6,7,9,10,10,11,11,11,11,11,11,11,11.
Materials
- Semi-tubular rivets order in mild steel, brass, copper and aluminium; the cavity end forms rather than upsets, so softer tempers set cleaner and the die set follows the printed cavity diameter (H13) and depth (t). State the total grip, the die equipment in use (manual setter, press, impact) and corrosion environment — leather and belt work traditionally brass or copper, general fabrication steel with finish
Ordering & documentation
Documents
Shipments of DIN 6791 Semi-Tubular Pan Head Rivets are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 6791 Semi-Tubular Pan Head Rivets orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 6791 Semi-Tubular Pan Head Rivets), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for din 6791 semi-tubular pan head rivets is 10,000–50,000 pieces depending on size (applies to the standard sizes and finishes for din 6791 semi-tubular pan head rivets; mixed, special or custom variants are quoted — final commercial terms per quotation) Standard production for din 6791 semi-tubular pan head rivets run 10–20 days. Quantities or variants of din 6791 semi-tubular pan head rivets outside the standard range are confirmed at quotation.
Storage & shipping
DIN 6791 Semi-Tubular Pan Head Rivets are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 6791 semi-tubular pan head rivets dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Why choose semi-tubular over a solid rivet of the same size?
Force and workpiece protection. The cavity means the closing side curls instead of spreading, so setting force drops dramatically — thin or layered work (leather stacks, belt laps, fabric-reinforced sheets, plastics laminates) sets without the blow that would distort or crush it, and the joint still cannot pull apart because the curled rim is captive. What it gives up is shear strength: the shank section is reduced by the cavity, so structural shear joints stay with solid rivets (DIN 660/662/302 class). The geometry that makes this concrete is in the table — the cavity depth t 10 against a 20 mm head at d 10 shows how much of the length is designed to curl, not to bear.
What do the js14 and H13 call-outs in the table mean for tooling?
They are the tolerance classes the setting die must expect: the head height k carries js14 (a symmetric machining-grade band), and the cavity diameter d4 carries H13 (a standard hole-basis band) — in practice, the die punch that forms the cavity side is made to these bands, not to nominal alone. If your setter tooling was built against the 1993 edition, check it against the current tables before a production changeover: the transcribed 1993 pair lets you diff the two editions directly. For volume setting we match die tolerance to the printed bands and confirm on the order — mixed-edition rivets plus a single fixed die is the usual source of cavity depth drift in production.
What is the MOQ and lead time for DIN 6791 Semi-Tubular Pan Head Rivets?
Orders under this designation have a minimum order quantity of 10,000–50,000 pieces depending on size. Standard production ships in 10–20 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 6791 Semi-Tubular Pan Head Rivets state?
State the full designation (DIN 6791 Semi-Tubular Pan Head Rivets), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 6791 Semi-Tubular Pan Head Rivets inquiry
- ✓ Identify blind, solid or structural rivet type and the applicable product standard.
- ✓ Give rivet-body diameter and grip range for the complete material stack, plus the prepared-hole size.
- ✓ Specify head style/clearance and state body and mandrel materials separately for blind rivets.
- ✓ For load-bearing joints, provide required rivet-specific tensile and shear values; do not substitute a bolt property class.
- ✓ State finish, quantity, destination and any lot-test or traceability documents required.
- ✓ Factory-direct pricing for your DIN 6791 Semi-Tubular Pan Head Rivets
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support