DIN 662 Mushroom Head Rivets

DIN 662 mushroom head solid rivets, d1 1.6 to 6: 2011 and 1993 editions with head geometry, and the commercial-length mass ladder from 3 to 20 mm.

Last updated: 2026-11

Request a Quote

DIN 662 Mushroom Head Rivets in an industrial setting
Illustrative image redrawn from real DIN 662 Mushroom Head Rivets product references — not a photograph of stocked items.

Specifications

DIN 662 is the small mushroom (round) head solid rivet — the general repair and light-fabrication rivet in the 1.6 to 6 mm range. The collected 03/2011-edition table gives per size: shank d1 min/max (5.85/6.15 at d6), head dk nom (12), head height k ≈ (3), cavity depth w ≈ (2), head edge e max (3), fillet r1 ≈ (10) and the punch-side d min (5.82); the superseded 05/1993 edition is transcribed beside it (its d min prints 5.85 — a real, small edition difference the page keeps visible). The mass ladder runs lengths 3 to 20 mm per diameter (0.35 kg per 1000 at 1.6 × 3 up to 5.9 at 6 × 20). This is the rivet of tool boxes, hinges, knife scales, brake and clutch linings and general thin-plate repair: set cold with a simple dolly, no countersink, no specialized dies.

Standard / scope DIN 662 mushroom head rivets — d1 1.6 to 6, edition 03/2011 (supersedes 05/1993; the 1993 edition transcribed as separate tables)
Shank tolerances d1 min/max per size: 5.85/6.15 at d1 6 (1993 edition prints d min 5.85 — edition difference carried verbatim)
Head geometry dk nom to 12, k ≈ 3, cavity w ≈ 2, e max 3, fillet r1 ≈ 10, d min 5.82 at d1 6
Commercial lengths Mass ladder (kg per 1000 pcs, ρ=7,85 kg/dm³) l 3 to 20 across d1 1.6–6
Not tabulated Material families (steel/Cu/Al), temper, setting data — per RFQ
DIN 662 mushroom head rivets — 03/2011 edition, geometry by nominal diameter d1Dimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
d1 nominal sized1 mind1 maxdk nomk ≈w ≈e maxr1 ≈d min
1.61.551.653.20.90.60.82.81.52
21.92.1410.713.31.87
2.52.42.651.20.81.254.22.37
32.93.161.511.552.87
3.53.43.671.81.21.7563.37
43.94.182.11.426.53.87
54.855.15102.51.72.58.24.82
65.856.1512323105.82
  • Source spanning title row carried verbatim: "Dimensions in mm - source DIN 662".
  • Edition row carried from the source grid: "Publication date: 03/2011 - Supersedes DIN 662: 05/1993".
DIN 662 2011 — approximate mass, kg per 1000 pcs (ρ=7,85 kg/dm³), commercial lengthsDimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
thread size1.622.533.5456
nominal length l
30.080.130.210.35
40.100.150.250.40.61
50.110.180.290.460.680.951.6
60.130.20.330.510.7611.82.8
80.160.250.410.620.911.22.13.2
100.190.30.480.731.11.42.43.7
120.220.350.560.851.21.62.74.1
140.260.40.640.961.41.834.5
160.290.450.711.11.523.35
180.320.50.791.21.72.23.65.4
200.350.550.871.31.82.43.95.9
  • Source spanning title row carried verbatim: "Din 662 2011 ≈ weigth, in kg x1000 pcs, (ρ=7,85 kg/dm 3 )".
  • Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (9/1/5/6/8) — grid padded empty; per-row pre-pad widths: 9,9,1,5,6,8,9,9,9,9,9,9,9,9.
DIN 662 mushroom head rivets — superseded 05/1993 edition, geometry by nominal diameter d1Dimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
d1 nominal sized1 mind1 maxdk nomk ≈w ≈e maxr1 ≈d min
1.61.551.653.20.90.60.82.81.55
21.92.1410.713.31.9
2.52.42.651.20.81.254.22.4
32.93.161.511.552.9
3.53.43.671.81.21.7563.14
43.94.182.11.426.53.9
54.855.15102.51.72.58.24.85
65.856.1512323105.85
  • Source spanning title row carried verbatim: "Dimensions in mm - source DIN 662".
  • Edition row carried from the source grid: "Publication date: 05/1993" — superseded edition table transcribed verbatim alongside the current one.
DIN 662 1993 (superseded) — approximate mass, kg per 1000 pcs, commercial lengthsDimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
thread size1.622.533.5456
nominal length l
30.08
40.14
50.170.3
60.340.530.74
80.640.921.2
101.11.42.4
121.62.74.2
1434.7
163.35.1
185.6
206
  • Source spanning title row carried verbatim: "Din 662 1993 ≈ weigth, in kg x1000 pcs, (ρ=7,85 kg/dm 3 )".
  • Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (9/1/2/3/4/6/7/8) — grid padded empty; per-row pre-pad widths: 9,9,1,2,3,4,6,7,8,9,9,9,9,9.

Materials

  • Order by material family: mild steel (general), copper (electrical, ductile set, corrosion pairing with Cu alloys), aluminium alloys (light work — softer set, lower strength). The mushroom head needs no countersink but does want a flat bearing face; for linings and friction-facing work state the lining material, since cavity depth w and set behaviour matter to the facing

Ordering & documentation

Documents

Shipments of DIN 662 Mushroom Head Rivets are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 662 Mushroom Head Rivets orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 662 Mushroom Head Rivets), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for din 662 mushroom head rivets is 10,000–50,000 pieces depending on size (applies to the standard sizes and finishes for din 662 mushroom head rivets; mixed, special or custom variants are quoted — final commercial terms per quotation) Standard production for din 662 mushroom head rivets run 10–20 days. Quantities or variants of din 662 mushroom head rivets outside the standard range are confirmed at quotation.

Storage & shipping

DIN 662 Mushroom Head Rivets are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 662 mushroom head rivets dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

What length do I order for a given joint?

Grip plus the closing allowance: measure the total clamp thickness, add the allowance for the closing head the setting operation forms (roughly half to two-thirds of the shank diameter in cold setting, per practice), and take the nearest printed length step from the ladder (3 to 20 mm in the table). A too-short rivet cannot form a full closing head — the classic loose-rivet failure — and a too-long one folds instead of upsetting cleanly. Because DIN 662 serves so much repair work, we routinely quote two adjacent lengths for trial on new joints; the mass table prices both exactly per 1000 pcs so the trial costs nothing to evaluate.

Does the small d min difference between the 2011 and 1993 tables matter?

Not to the joint — the difference is a few hundredths on the shank minimum (5.82 vs 5.85 at d1 6 as the two tables print) — but it matters to identification: the two tables are carried verbatim precisely so a measurement audit can tell which edition a loose rivet was made to. For ordering, quote DIN 662 plus size and length as your drawing prints and name the edition if the drawing carries one; supply conforms to the current edition unless the order says otherwise, and both editions' head and length geometry agree, so stocks mix freely in service.

What is the MOQ and lead time for DIN 662 Mushroom Head Rivets?

Orders under this designation have a minimum order quantity of 10,000–50,000 pieces depending on size. Standard production ships in 10–20 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 662 Mushroom Head Rivets state?

State the full designation (DIN 662 Mushroom Head Rivets), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 662 Mushroom Head Rivets inquiry

  • ✓ Identify blind, solid or structural rivet type and the applicable product standard.
  • ✓ Give rivet-body diameter and grip range for the complete material stack, plus the prepared-hole size.
  • ✓ Specify head style/clearance and state body and mandrel materials separately for blind rivets.
  • ✓ For load-bearing joints, provide required rivet-specific tensile and shear values; do not substitute a bolt property class.
  • ✓ State finish, quantity, destination and any lot-test or traceability documents required.
  • ✓ Factory-direct pricing for your DIN 662 Mushroom Head Rivets
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.