DIN 302 Countersunk Head Rivets

DIN 302 countersunk head solid rivets, d1 10 to 36: 2011 and superseded 1993 editions with head geometry, and the commercial-length mass ladders to 160 mm.

Last updated: 2026-11

Request a Quote

DIN 302 Countersunk Head Rivets in an industrial setting
Illustrative image redrawn from real DIN 302 Countersunk Head Rivets product references — not a photograph of stocked items.

Specifications

DIN 302 is the large countersunk solid rivet — hot or cold set flush work in structural plate, shipbuilding and heavy fabrication. The collected 03/2011-edition table runs d1 10 to 36: head diameter dk nom (51 at d36), shank d min (34.6), head side e max (18), head height k ≈ (18) and the row r 2 (170 at d36); the superseded 05/1993 edition is transcribed as a second geometry table carrying its own tolerance style (d min/max 35.7/36.3, countersink angle a 45°/50°) — both verbatim, because legacy drawings split between the editions. The mass ladders (2011 and 1993 each split over two column blocks) price the commercial lengths from 10 up to 160 mm per diameter. The flush joint is the point of the standard: the countersink angle and e/k geometry in these tables are what the die and the hole preparation must reproduce.

Standard / scope DIN 302 countersunk head rivets — d1 10 to 36, edition 03/2011 (supersedes 05/1993; the 1993 edition transcribed as separate tables)
Head geometry 2011 dk nom to 51, d min 34.6, e max 18, k ≈ 18, r 2 to 170 at d1 36
Head geometry 1993 dk nom 51, d min/max 35.7/36.3, k ≈ 18, countersink angle a min/max 45°/50° at d1 36
Commercial lengths Mass ladders (kg per 1000 pcs, ρ=7,85 kg/dm³) from l 10 to 160 across d1 10–36, current and 1993 editions each in two column blocks
Not tabulated Material (steel/Cu/Al alloys), setting method (hot/cold), hole and countersink preparation — per RFQ
DIN 302 countersunk head rivets — 2011 edition, head and shank geometry by nominal diameter d1Dimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
d1 nom sizedk nomd mine maxk ≈r 2
1014.59.45332
121811.36445
1421.513.27560
162615.286.585
183017.198105
2031.519.11010120
2234.520.9111175
243822.9121285
274225.813.513.5110
3042.528.61515120
3346.531.616.516.5145
365134.61818170
  • Source spanning title row carried verbatim: "Dimensions in mm - source DIN 302".
  • Edition row carried from the source grid: "Publication date: 03/2011 - Supersedes DIN 302: 05/1993".
  • Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (7/6) — grid padded empty; per-row pre-pad widths: 7,7,6,6,6,6,6,6,6,6,6,6,6,6,6.
DIN 302 2011 — approximate mass, kg per 1000 pcs (ρ=7,85 kg/dm³), commercial lengths, d1 10–36Dimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
d1 nominal size101214161820222427303336
nominal length l
107.93
129.1713.8
1410.415.622.2
1611.717.424.635.1
1812.919.227.138.351.5
2014.121.029.541.455.569.2
2215.422.731.944.659.574.295
2416.624.534.347.863.479.1101123
2617.926.336.750.967.484.1107130
2819.128.139.254.171.489.0113137177
3020.329.941.657.275.493.9119145185218
3221.631.644.060.479.498.9125152194229
3422.833.446.463.683.3104131159203240294
3624.135.248.866.787.3109137166212251307373
3825.337.051.369.991.3114143173221262321389
4026.538.853.773.095.3119149180230273334405
4227.840.556.176.299.3124155187239264348421
4529.643.259.780.9105131164198253301368445
4831.545.963.485.7111138173208266318388468
5032.747.765.888.8115143179216275329401484
5234.049.468.292.0119148185223284340415500
5535.852.171.896.7125156193233298357435524
5837.754.875.5105131163202244311373455548
6038.956.677.9105135168208251320384468564
6240.258.380.3108139173214258329395482580
6542.061.083.9113145180223269343412502604
6843.963.787.6117151188232279356429522628
7045.165.590.0120155193238287365440530644
  • Source spanning title row carried verbatim: "Din 302 2011- Approximate mass, in kg x1000 pcs, (ρ=7,85 kg/dm 3 ) - commercial items".
  • Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (13/1/2/3/4/5/6/7/8/9/10/11/12) — grid padded empty; per-row pre-pad widths: 13,13,1,2,3,4,5,6,7,8,9,9,10,11,11,12,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13.
DIN 302 2011 — approximate mass ladder continuation, d1 10–36 (lower triangle of the commercial-length grid)Dimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
d1 nominal size101214161820222427303336
nominal length l
7246.467.292.4124159198244294374451549660
7548.269.996.0128165205253304388468569684
7851.172.699.7133171212262315401484589705
8051.374.4102136175217268322410495603724
8554.478.8108144185230283340432523663764
9057.583.3114152196242298358455551670804
9560.687.7120160205254313375477579703844
10063.792.2126168215267328393500606737884
10566.896.6132176225279342411522634770924
11069.9101138184235292367429545662804964
11573.01061441922453043724465676908371004
12076.11101501992543163874645907178171044
12579.21141572072643294024826127459051084
13082.31191632152743414175006347739381124
13585.41231692232843534325176578019721164
14088.512817523129436644753567982810051204
14591.813218123930437846255370285610391244
15094.713718724731439047757172488410721283
15597.814119325532440349158874791211061323
160100.914619926333441550660676993911391363
  • Source spanning title row carried verbatim: "Din 302 2011- Approximate mass, in kg x1000 pcs, (ρ=7,85 kg/dm 3 ) - commercial lengths".
  • Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (13/1) — grid padded empty; per-row pre-pad widths: 13,13,1,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13.
DIN 302 countersunk head rivets — superseded 05/1993 edition, head and shank geometry by nominal diameter d1Dimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
d1 nom sizedk nomd mind maxk ≈a mina max
1014.59.810.2375°80°
121811.812.2475°80°
1421.513.814.2575°80°
162615.816.26.575°80°
183017.818.2875°80°
2031.519.820.21060°65°
2234.521.822.21160°65°
243823.724.31260°65°
274226.727.313.560°65°
3042.529.730.31545°50°
3346.532.733.316.545°50°
365135.736.31845°50°
  • Source spanning title row carried verbatim: "Dimensions in mm - source DIN 302".
  • Edition row carried from the source grid: "Publication date: : 05/1993" — superseded edition table transcribed verbatim alongside the current one.
  • Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (8/7) — grid padded empty; per-row pre-pad widths: 8,8,7,7,7,7,7,7,7,7,7,7,7,7,7.
DIN 302 1993 (superseded) — approximate mass, kg per 1000 pcs, commercial lengths, d1 10–36Dimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
d1 nominal size101214161820222427303336
nominal length l
107.80
129.03
1410.316.2
1611.518
1812.719.827
201421.629.4
2215.223.431.8
2416.425.234.347.7
2617.72736.750.967.7
2818.928.839.154.171.7
3020.130.741.557.275.794.1
3221.432.543.960.479.799.1125
3422.634.346.363.583.7104131
3623.83648.866.787.7109137167
3825.137.851.269.991.7114143174
4026.339.653.67395.7119149181230
4227.541.45676.299.7124155188239
4529.44459.780.9106131164198253302
4831.246.763.385.6112139173209266310
5032.548.565.788.8116144179216275330401
5233.750.368.192120148184223284341414
5552.971.196.7126156193234298358435524
5855.675.4101132163202245311374455548
6057.477.8105136165208252320385468564
6280.2108140170214259329396481580
6583.8113146178223269343413502604
6887.4117152185232280356430522628
7089.8120156190238287365441535644
  • Source spanning title row carried verbatim: "Din 302 1993- Approximate mass, in kg x1000 pcs, (ρ=7,85 kg/dm 3 )".
  • Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (13/1/2/3/4/5/6/7/8/9/10/11/12) — grid padded empty; per-row pre-pad widths: 13,13,1,2,2,3,3,4,4,4,5,6,6,7,8,8,9,9,10,10,11,11,12,12,13,13,13,13,13,13,13.
DIN 302 1993 (superseded) — approximate mass ladder continuationDimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
d1 nominal size101214161820222427303336
nominal length l
72124160195244294374452548660
75128166202254305388469569684
78133172210263316401485589708
80136176215269323410496602724
85186277284341433524636764
90196239299359455552670804
95252314377478580704844
100264329395500607738884
105344413522635772924
110359431545663806964
1154495686918401000
1204675907188741040
1256137469081080
1306357749421120
1356588029761160
14082910101200
14585710441240
15088510781280
15511121320
16011461360
  • Source spanning title row carried verbatim: "Din 302 1993- Approximate mass, in kg x1000 pcs, (ρ=7,85 kg/dm 3 )".
  • Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (13/1) — grid padded empty; per-row pre-pad widths: 13,13,1,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13.

Materials

  • Solid rivets order by material family: steel grades for structural plate work (hot-set), copper and aluminium alloys where the joint wants ductility or corrosion pairing. The countersunk head sets flush only against a matched countersink — state the plate thickness stack and whether setting is hot or cold, because material choice follows the process. Mass tables give the exact order weight per 1000 pcs

Ordering & documentation

Documents

Shipments of DIN 302 Countersunk Head Rivets are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 302 Countersunk Head Rivets orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 302 Countersunk Head Rivets), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for din 302 countersunk head rivets is 10,000–50,000 pieces depending on size (applies to the standard sizes and finishes for din 302 countersunk head rivets; mixed, special or custom variants are quoted — final commercial terms per quotation) Standard production for din 302 countersunk head rivets run 10–20 days. Quantities or variants of din 302 countersunk head rivets outside the standard range are confirmed at quotation.

Storage & shipping

DIN 302 Countersunk Head Rivets are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 302 countersunk head rivets dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why are both the 2011 and 1993 editions on the page?

Because the source page prints the current 03/2011 edition and the superseded 05/1993 edition as separate tables, and the collected corpus transcribed both verbatim — the two editions differ in tolerance style (the 1993 table carries d min/max pairs and the countersink angle a 45°/50°, the 2011 table the r-row style), and fabrication drawings in service still reference both. For new work the 2011 edition governs; for replacing rivets against a legacy drawing, read the edition the drawing cites and order to it — the head diameters agree, the tolerancing does not. Send the drawing extract if the joint is qualification-controlled, and we set the order against the cited edition.

How do I size the countersink for a DIN 302 rivet?

From the head columns: the countersink must accept dk nom at the printed head height k ≈ and side e max — the hole is drilled to the shank d and countersunk deep enough that the flush result comes from the head sitting just below the plate surface before setting closes it. The 1993 table makes the angle explicit (a 45°/50° at the large sizes) and that is the practical check for tooling: match the countersink cutter angle to the edition the rivet is ordered to. The mass ladders then let you compute plate-thickness per length: rivet length ≈ grip plus the closing allowance the setting process dictates — state the grip on the RFQ and we confirm the length step from the printed ladder.

What is the MOQ and lead time for DIN 302 Countersunk Head Rivets?

Orders under this designation have a minimum order quantity of 10,000–50,000 pieces depending on size. Standard production ships in 10–20 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 302 Countersunk Head Rivets state?

State the full designation (DIN 302 Countersunk Head Rivets), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 302 Countersunk Head Rivets inquiry

  • ✓ Identify blind, solid or structural rivet type and the applicable product standard.
  • ✓ Give rivet-body diameter and grip range for the complete material stack, plus the prepared-hole size.
  • ✓ Specify head style/clearance and state body and mandrel materials separately for blind rivets.
  • ✓ For load-bearing joints, provide required rivet-specific tensile and shear values; do not substitute a bolt property class.
  • ✓ State finish, quantity, destination and any lot-test or traceability documents required.
  • ✓ Factory-direct pricing for your DIN 302 Countersunk Head Rivets
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.