ASME B18.21.1 External Tooth Lock Washers — Inch Series (No. 3 – 1 1/4 in)

ASME B18.21.1 external tooth lock washer dimensions for inch-series screws — inside diameter, outside diameter and thickness per nominal size from No. 3 through 1 1/4 in, with the outward-facing tooth count the source prints, transcribed row-for-row.

Last updated: 2026-11

Request a Quote

ASME B18.21.1 External Tooth Lock Washers — Inch Series (No. 3 – 1 1/4 in) in an industrial setting
Illustrative image redrawn from real ASME B18.21.1 External Tooth Lock Washers — Inch Series (No. 3 – 1 1/4 in) product references — not a photograph of stocked items.

Specifications

The external tooth lock washer turns its hardened points outward: a ring of teeth that bite the mating surface around the fastener's bearing circle, holding both the screw and the washer against rotation. On the collected chart it runs No. 3 through 1 1/4 in — starting one size above the internal-tooth table's floor, a detail worth knowing when matching pairs — with ID, OD, thickness and tooth count per size. The outward geometry is the aggressive variant: teeth cutting into the base material give the strongest anti-rotation bite of the tooth family, which is why external rings are the default on stamped-metal chassis, terminal hardware and grounding hardware (the tooth bite also doubles as an electrical bond through paint and oxide films — a genuine second function on grounding lugs and EMI shields). The costs are symmetrical: the bite marks the mating surface (wrong for finished faces), needs bearing-area real estate (wrong under countersunk heads), and like all tooth rings it assumes through-hardened material — not tabulated by the collected chart, an RFQ line. On thin or soft substrate, the teeth can embed deeply enough to relax preload over time; that dynamic, not the tooth count, decides whether this is the right hardware for the joint.

Standard ASME B18.21.1 — external tooth lock washers, inch series
Size range Nominal screw sizes No. 3 – 1 1/4 in, 19 printed rows (chart floor one size above the internal-tooth table)
Tabulated limits (in) Per row: inside diameter max/min, outside diameter max/min, thickness max/min, plus teeth count as printed per size
Function Outward-facing hardened teeth bite the mating surface around the bearing circle — strongest anti-rotation bite of the tooth family; also serves as an electrical bond through surface films on grounding hardware
Hardness / finish / material Not tabulated by the collected chart — per RFQ; functional locking requires through-hardened material — state hardness and finish
ASME B18.21.1 external tooth lock washers, Type A and Type B (inch) — per-size dimensionsAll dimensions in inches. Nominal size is the nominal thread diameter (decimal in parentheses). A = inside diameter, B = outside diameter, C = thickness, each max/min. The series starts at No.3 — no No.2 size is tabulated by the collected chart.
Nominal Size (thread dia.)A — Inside Dia. (max)A (min)B — Outside Dia. (max)B (min)C — Thickness (max)C (min)
No.3 (0.099)0.1090.1020.2350.2200.0160.010
No.4 (0.112)0.1230.1150.2600.2450.0180.012
No.5 (0.125)0.1360.1290.2850.2700.0200.014
No.6 (0.138)0.1500.1410.3200.3050.0220.016
No.8 (0.164)0.1760.1680.3810.3650.0230.018
No.10 (0.190)0.2040.1950.4100.3950.0240.018
No.12 (0.216)0.2310.2210.4750.4600.0270.020
1/4 (0.250)0.2670.2560.5100.4940.0280.023
5/16 (0.3125)0.3320.3200.6100.5880.0340.028
3/8 (0.375)0.3980.3840.6940.6700.0400.032
7/16 (0.4375)0.4640.4480.7600.7400.0400.032
1/2 (0.500)0.5300.5130.9000.8800.0450.037
9/16 (0.5625)0.5960.5760.9850.9600.0450.037
5/8 (0.625)0.6630.6411.0701.0450.0500.042
11/16 (0.6875)0.7280.7041.1551.1300.0500.042
3/4 (0.750)0.7950.7681.2601.2200.0550.047
13/16 (0.8125)0.8610.8331.3151.2900.0550.047
7/8 (0.875)0.9270.8971.4101.3800.0600.052
1 (1.000)1.0601.0251.6201.5900.0670.059

Materials

  • Through-hardened spring steel or stainless is the functional requirement; note tooth bite marks finished surfaces — choose washer and substrate materials together at RFQ

Ordering & documentation

Documents

Shipments of ASME B18.21.1 External Tooth Lock Washers — Inch Series (No. 3 – 1 1/4 in) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASME B18.21.1 External Tooth Lock Washers — Inch Series (No. 3 – 1 1/4 in) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ASME B18.21.1 External Tooth Lock Washers — Inch Series (No. 3 – 1 1/4 in)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for ASME B18.21.1 External Tooth Lock Washers — Inch Series (No. 3 – 1 1/4 in): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for asme b18.21.1 external tooth lock washers — inch series (no. 3 – 1 1/4 in) is 10,000 pieces (applies to the standard sizes and finishes for asme b18.21.1 external tooth lock washers — inch series (no. 3 – 1 1/4 in); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for asme b18.21.1 external tooth lock washers — inch series (no. 3 – 1 1/4 in) run 3–7 days. Quantities or variants of asme b18.21.1 external tooth lock washers — inch series (no. 3 – 1 1/4 in) outside the standard range are confirmed at quotation.

Storage & shipping

ASME B18.21.1 External Tooth Lock Washers — Inch Series (No. 3 – 1 1/4 in) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store asme b18.21.1 external tooth lock washers — inch series (no. 3 – 1 1/4 in) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

When should I choose external-tooth over internal-tooth or helical washers — and what are the trade-offs on finished surfaces?

Choose external teeth when anti-rotation is the priority and the mating surface can afford the bite. On stamped chassis, terminal blocks and grounding hardware, the outward ring locks screw and washer simultaneously and gives the strongest bite of the lock-washer family; on grounding and EMI hardware it does double duty, with the teeth penetrating paint and oxide to make electrical contact — a function the internal-tooth and helical types only partially provide. The trade-offs are physical: the teeth mark the surface (never under finished or painted faces where appearance or corrosion-start matters), they need the OD real estate (countersunk heads leave no room — that is internal-tooth territory), and on thin or soft substrate the points embed, relaxing preload over time — for that duty, a wide plain fender washer spreading load may hold better than any tooth ring. A sizing detail from the collected chart: the external-tooth table starts at No. 3 while the internal starts at No. 2, so a No. 2 screw pairs with internal only. As with all lock washers, hardness and material arrive at RFQ — a soft external ring neither bites nor bonds — and for high-preload or thermal-cycling joints, name an engineered locking method on the drawing instead of defaulting to hardware.

What is the MOQ and lead time for washers on this standard?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common inch sizes are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ASME B18.21.1 External Tooth Lock Washers — Inch Series (No. 3 – 1 1/4 in) inquiry

  • ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
  • ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
  • ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
  • ✓ Describe the bearing surface or locking function, quantity per size and destination.
  • ✓ Factory-direct pricing for your ASME B18.21.1 External Tooth Lock Washers — Inch Series (No. 3 – 1 1/4 in)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.