DIN 6340 Washers for Clamping Devices

DIN 6340 washers for clamping devices, M6 to M30 — the hardened, wide-body washer used under clamp screws and T-bolts in fixtures — with the full collected 8-size table: bore, outside diameter and thickness.

Last updated: 2026-11

Request a Quote

DIN 6340 Washers for Clamping Devices in an industrial setting
Illustrative image redrawn from real DIN 6340 Washers for Clamping Devices product references — not a photograph of stocked items.

Specifications

DIN 6340 is the washer sized for workholding: fixture clamps, T-bolts in machine tables, and swing clamps all put a hard, concentrated clamp load through a screw into the part being held. This washer is the interface — wider and thicker than a standard plain washer at the same thread, so it spreads the clamp without deforming, and made to take repeated re-clamping cycle after cycle. The collected table covers M6 to M30 with the bore d (min = nominal size (H14) / max), outside diameter d c (max = nominal size (h14) / min), and thickness h — the three figures a fixture builder needs to match the washer to the clamp stud and the strap. Hardness, materials and finishes are not printed by the collected specification and stay per RFQ. For the companion nut side of the fixture kit see T-slot nuts DIN 508 on this site.

Standard DIN 6340 — washers for clamping devices (fixture and workholding washers)
Series M6 – M30 (8 sizes tabulated)
Tabulated geometry Per size: bore d (min=nominal size (H14) / max), outside diameter d c (max=nominal size (h14) / min), thickness h
Function Wide, thick bearing interface under clamp screws and T-bolts — spreads fixture clamp load, survives re-clamping
Family note Pairs with DIN 508 T-slot nuts in the machine-table clamping kit
Materials / hardness Not tabulated by the collected specification — per RFQ (hardness class per application)
DIN 6340 washers for clamping devices - per-size dimensions (M6 - M30)All dimensions in millimeters. Attribute labels follow the source: d = bore (min=nominal size (H14) / max); d c = outside diameter (max=nominal size (h14) / min); h = thickness. per 1000 units ≈ kg is the source's reference mass. Materials, hardness and finishes are not tabulated by the collected specification.
For thread diameterd — min=nominal size (H14)d — maxd c — max=nominal size (h14)d c — minhper 1000 units ≈ kg
M66.46.761716.5734.6
M88.48.762322.48411.3
M1010.510.932827.48416.6
M121313.433534.38532.5
M161717.434544.38664.3
M202121.525049.38676
M242525.526059.268147
M303131.626867.2610226

Materials

  • Material and hardness specified per RFQ — the collected specification table covers geometry only

Ordering & documentation

Documents

Shipments of DIN 6340 Washers for Clamping Devices are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 6340 Washers for Clamping Devices orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 6340 Washers for Clamping Devices), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 6340 Washers for Clamping Devices: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 6340 washers for clamping devices is 10,000 pieces (applies to the standard sizes and finishes for din 6340 washers for clamping devices; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 6340 washers for clamping devices run 3–7 days. Quantities or variants of din 6340 washers for clamping devices outside the standard range are confirmed at quotation.

Storage & shipping

DIN 6340 Washers for Clamping Devices are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 6340 washers for clamping devices dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why not use a standard plain washer under a fixture clamp?

Because a clamp screw is a much harsher customer than a bolted joint. Fixture clamps are torqued hard, released, and torqued again all day; a thin DIN 125 washer cups under the point load and then cracks or drills into the strap. DIN 6340 adds thickness at the same thread size for section, and outside diameter for spread, so the clamp load stays distributed through thousands of cycles. The tabulated h thickness is the give-away — it runs several times a plain washer's at the same M size. Specify hardness at RFQ when the clamp load or strap material demands it.

What is the MOQ and lead time for this washer type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 6340 Washers for Clamping Devices inquiry

  • ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
  • ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
  • ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
  • ✓ Describe the bearing surface or locking function, quantity per size and destination.
  • ✓ Factory-direct pricing for your DIN 6340 Washers for Clamping Devices
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.