DIN 25201 Dual Lock Washers
DIN 25201 Nord-Lock-style dual lock washers — paired cam-surface washers sizes 3 to 130 (with the source's ① inch-designated and ② Large Type variants), the wedge-effect pair that locks a bolt against rotation, with the collected bore/OD/thickness ladder in steel and stainless and kg/1000 figures.
Last updated: 2026-11
Specifications
DIN 25201 is the paired cam lock washer: two washers used as a set, each with radial cam ramps on one face and ratchet teeth on the other — outer teeth grip the bolt head and joint face, and the steeper cam ramps between the pair force the bolt to climb rather than turn loose, so vibration increases clamp instead of undoing it. The collected ladder is the widest in this catalog's washer family: sizes 3 → 130 across 23 sub-tables, including the source's ② Large Type variants (larger outside diameter at the same bore for soft or slotted surfaces) and the ① inch-designated sizes (1/4, 3/8, 1/2, 3/4, 1) with the source's own inch-mark character, plus a Metric/Inch bolt-size mapping row per table. Thickness is tabulated separately for Steel and Stainless Steel (the stainless set runs thicker — 2.2 mm versus 1.8 mm nominal at the small end), and each carries its own ± kg/1000 mass row. Install as a pair, cams face-to-face, teeth outward; read bore, outside diameter and thickness off the table for the seat and clearance checks. The source tabulates geometry and mass only — proof load, hardness and coating stay per RFQ (state the joint's vibration duty and any finish at quotation).
| Standard | DIN 25201 — dual lock washers (paired cam-surface washers, sold and installed as sets) |
|---|---|
| Size range | Sizes 3 – 130 (metric), plus ① inch-designated sizes 1/4 – 1 and ② Large Type variants per the source notation |
| Bore diameter | d: max/min per size (e.g. size 8: 8.8 max / 8.6 min) |
| Outside diameter | dc: Nominal Size/max/min per size, ② Large Type columns carry their own dc ladder |
| Thickness | h: tabulated separately for Steel and Stainless Steel (e.g. size 3: steel 1.8 / stainless 2.2 nominal) |
| Weight | per 1000 units≈kg③ rows per material carried verbatim |
| Proof load / hardness | Not tabulated by the collected specification — per RFQ |
| Size | 3 | 3.5 | 3.5 Large② |
|---|---|---|---|
| Bolt size — Metric | M3 | M3.5 | M3.5 |
| Inch | #5 | #6 | #6 |
| d — max | 3.5 | 4 | 4 |
| min | 3.3 | 3.8 | 3.8 |
| dc — Nominal Size | 7 | 7.6 | 9 |
| max | 7.2 | 7.8 | 9.2 |
| min | 6.8 | 7.4 | 8.8 |
| h — Steel — Nominal Size | 1.8 | 1.8 | 1.8 |
| max | 2.05 | 2.05 | 2.05 |
| min | 1.55 | 1.55 | 1.55 |
| per 1000 units≈kg③ — Steel — ≈ | 0.3 | 0.4 | 0.6 |
| h — Stainless Steel — Nominal Size | 2.2 | 2.2 | 2.2 |
| max | 2.45 | 2.45 | 2.45 |
| min | 1.95 | 1.95 | 1.95 |
| per 1000 units≈kg③ — Stainless Steel — ≈ | 0.4 | 0.4 | 0.7 |
| Size | 4 | 4 Large② | 5 |
|---|---|---|---|
| Bolt size — Metric | M4 | M4 | M5 |
| Inch | #8 | #8 | #10 |
| d — max | 4.5 | 4.5 | 5.5 |
| min | 4.3 | 4.3 | 5.3 |
| dc — Nominal Size | 7.6 | 9 | 9 |
| max | 7.8 | 9.2 | 9.2 |
| min | 7.4 | 8.8 | 8.8 |
| h — Steel — Nominal Size | 1.8 | 1.8 | 1.8 |
| max | 2.05 | 2.05 | 2.05 |
| min | 1.55 | 1.55 | 1.55 |
| per 1000 units≈kg③ — Steel — ≈ | 0.4 | 0.6 | 0.5 |
| h — Stainless Steel — Nominal Size | 2.2 | 2.2 | 2.2 |
| max | 2.45 | 2.45 | 2.45 |
| min | 1.95 | 1.95 | 1.95 |
| per 1000 units≈kg③ — Stainless Steel — ≈ | 0.4 | 0.7 | 0.6 |
| Size | 5 Large② | 6 | 6 Large② |
|---|---|---|---|
| Bolt size — Metric | M5 | M6 | M6 |
| Inch | #10 | - | - |
| d — max | 5.5 | 6.6 | 6.6 |
| min | 5.3 | 6.4 | 6.4 |
| dc — Nominal Size | 10.8 | 10.8 | 13.5 |
| max | 11 | 11 | 13.7 |
| min | 10.6 | 10.6 | 13.3 |
| h — Steel — Nominal Size | 1.8 | 1.8 | 2.5 |
| max | 2.05 | 2.05 | 2.75 |
| min | 1.55 | 1.55 | 2.25 |
| per 1000 units≈kg③ — Steel — ≈ | 1.1 | 0.7 | 2 |
| h — Stainless Steel — Nominal Size | 2.2 | 2.2 | 2 |
| max | 2.45 | 2.45 | 2.25 |
| min | 1.95 | 1.95 | 1.75 |
| per 1000 units≈kg③ — Stainless Steel — ≈ | 1.1 | 0.9 | 1.6 |
| Size | 1/4① | 1/4 Large① ② | 8 |
|---|---|---|---|
| Bolt size — Metric | - | - | M8 |
| Inch | 1/4” | 1/4” | 5/16” |
| d — max | 7.3 | 7.3 | 8.8 |
| min | 7.1 | 7.1 | 8.6 |
| dc — Nominal Size | 11.5 | 13.5 | 13.5 |
| max | 11.7 | 13.7 | 13.7 |
| min | 11.3 | 13.3 | 13.3 |
| h — Steel — Nominal Size | 2.5 | 2.5 | 2.5 |
| max | 2.75 | 2.75 | 2.75 |
| min | 2.25 | 2.25 | 2.25 |
| per 1000 units≈kg③ — Steel — ≈ | 0.8 | 1.8 | 1.5 |
| h — Stainless Steel — Nominal Size | 2.2 | 2.2 | 2 |
| max | 2.45 | 2.45 | 2.25 |
| min | 1.95 | 1.95 | 1.75 |
| per 1000 units≈kg③ — Stainless Steel — ≈ | 0.9 | 1.5 | 1.2 |
- Row 1 (Bolt size — Metric): The size columns of this table are the source's inch-designated series (① footnote): tokens such as "1/4”" carry the source's own inch-mark character (a right double-quote, not the ASCII inch mark) and "1/4 Large① ②" carries both markers verbatim — not normalized.
| Size | 8 Large② | 3/8① | 3/8 Large ①② |
|---|---|---|---|
| Bolt size — Metric | M8 | - | - |
| Inch | 5/16” | 3/8” | 3/8” |
| d — max | 8.8 | 10.5 | 10.5 |
| min | 8.6 | 10.1 | 10.1 |
| dc — Nominal Size | 16.6 | 16.6 | 21 |
| max | 16.8 | 16.8 | 21.2 |
| min | 16.4 | 16.4 | 20.8 |
| h — Steel — Nominal Size | 2.5 | 2.5 | 2.5 |
| max | 2.75 | 2.75 | 2.75 |
| min | 2.25 | 2.25 | 2.25 |
| per 1000 units≈kg③ — Steel — ≈ | 2.8 | 2.3 | 4.8 |
| h — Stainless Steel — Nominal Size | 2 | 2 | 2 |
| max | 2.25 | 2.25 | 2.25 |
| min | 1.75 | 1.75 | 1.75 |
| per 1000 units≈kg③ — Stainless Steel — ≈ | 2.3 | 1.9 | 3.8 |
| Size | 10 | 10 Large② | 11 |
|---|---|---|---|
| Bolt size — Metric | M10 | M10 | M11 |
| Inch | - | - | 7/16” |
| d — max | 10.9 | 10.9 | 11.6 |
| min | 10.5 | 10.5 | 11.2 |
| dc — Nominal Size | 16.6 | 21 | 18.5 |
| max | 16.8 | 21.2 | 18.7 |
| min | 16.4 | 20.8 | 18.3 |
| h — Steel — Nominal Size | 2.5 | 2.5 | 2.5 |
| max | 2.75 | 2.75 | 2.75 |
| min | 2.25 | 2.25 | 2.25 |
| per 1000 units≈kg③ — Steel — ≈ | 2.2 | 4.7 | 2.9 |
| h — Stainless Steel — Nominal Size | 2 | 2 | 2.2 |
| max | 2.25 | 2.25 | 2.45 |
| min | 1.75 | 1.75 | 1.95 |
| per 1000 units≈kg③ — Stainless Steel — ≈ | 1.8 | 3.7 | 2.6 |
| Size | 12 | 12 Large② | 1/2① |
|---|---|---|---|
| Bolt size — Metric | M12 | M12 | - |
| Inch | - | - | 1/2” |
| d — max | 13.2 | 13.2 | 13.7 |
| min | 12.8 | 12.8 | 13.3 |
| dc — Nominal Size | 19.5 | 25.4 | 19.5 |
| max | 19.7 | 25.6 | 19.7 |
| min | 19.3 | 25.2 | 19.3 |
| h — Steel — Nominal Size | 2.5 | 3.4 | 2.5 |
| max | 2.75 | 3.65 | 2.75 |
| min | 2.25 | 3.15 | 2.25 |
| per 1000 units≈kg③ — Steel — ≈ | 2.9 | 9.3 | 2.7 |
| h — Stainless Steel — Nominal Size | 2 | 3 | 2 |
| max | 2.25 | 3.25 | 2.25 |
| min | 1.75 | 2.75 | 1.75 |
| per 1000 units≈kg③ — Stainless Steel — ≈ | 2.3 | 8.2 | 2.2 |
| Size | 1/2 Large① ② | 14 | 14 Large② |
|---|---|---|---|
| Bolt size — Metric | - | M14 | M14 |
| Inch | 1/2” | 9/16” | 9/16” |
| d — max | 13.7 | 15.4 | 15.4 |
| min | 13.3 | 15 | 15 |
| dc — Nominal Size | 25.4 | 23 | 30.7 |
| max | 25.6 | 23.2 | 30.9 |
| min | 25.2 | 22.8 | 30.5 |
| h — Steel — Nominal Size | 3.4 | 3.4 | 3.4 |
| max | 3.65 | 3.65 | 3.65 |
| min | 3.15 | 3.15 | 3.15 |
| per 1000 units≈kg③ — Steel — ≈ | 9 | 5.6 | 14.1 |
| h — Stainless Steel — Nominal Size | 3.2 | 3 | 3.2 |
| max | 3.45 | 3.25 | 3.45 |
| min | 2.95 | 2.75 | 2.95 |
| per 1000 units≈kg③ — Stainless Steel — ≈ | 8 | 4.9 | 13.1 |
| Size | 16 | 16 Large② | 18 |
|---|---|---|---|
| Bolt size — Metric | M16 | M16 | M18 |
| Inch | 5/8” | 5/8” | - |
| d — max | 17.2 | 17.2 | 19.7 |
| min | 16.8 | 16.8 | 19.3 |
| dc — Nominal Size | 25.4 | 30.7 | 29 |
| max | 25.6 | 30.9 | 29.2 |
| min | 25.2 | 30.5 | 28.8 |
| h — Steel — Nominal Size | 3.4 | 3.4 | 3.4 |
| max | 3.65 | 3.65 | 3.65 |
| min | 3.15 | 3.15 | 3.15 |
| per 1000 units≈kg③ — Steel — ≈ | 6.7 | 12.8 | 8.9 |
| h — Stainless Steel — Nominal Size | 3 | 3.2 | 3.2 |
| max | 3.25 | 3.45 | 3.45 |
| min | 2.75 | 2.95 | 2.95 |
| per 1000 units≈kg③ — Stainless Steel — ≈ | 5.9 | 11.3 | 8 |
| Size | 18 Large② | 3/4① | 3/4 Large① ② |
|---|---|---|---|
| Bolt size — Metric | M18 | - | - |
| Inch | - | 3/4” | 3/4” |
| d — max | 19.7 | 20.2 | 20.2 |
| min | 19.3 | 19.8 | 19.8 |
| dc — Nominal Size | 34.5 | 30.7 | 39 |
| max | 34.7 | 30.9 | 39.2 |
| min | 34.3 | 30.5 | 38.8 |
| h — Steel — Nominal Size | 3.4 | 3.4 | 3.4 |
| max | 3.65 | 3.65 | 3.65 |
| min | 3.15 | 3.15 | 3.15 |
| per 1000 units≈kg③ — Steel — ≈ | 15.8 | 10.5 | 22.1 |
| h — Stainless Steel — Nominal Size | 3.2 | 3.2 | 3.2 |
| max | 3.45 | 3.45 | 3.45 |
| min | 2.95 | 2.95 | 2.95 |
| per 1000 units≈kg③ — Stainless Steel — ≈ | 15.6 | 9.6 | 21 |
| Size | 20 | 20 Large② | 22 |
|---|---|---|---|
| Bolt size — Metric | M20 | M20 | M22 |
| Inch | - | - | 7/8” |
| d — max | 21.6 | 21.6 | 23.6 |
| min | 21.2 | 21.2 | 23.2 |
| dc — Nominal Size | 30.7 | 39 | 34.5 |
| max | 30.9 | 39.2 | 34.7 |
| min | 30.5 | 38.8 | 34.3 |
| h — Steel — Nominal Size | 3.4 | 3.4 | 3.4 |
| max | 3.65 | 3.65 | 3.65 |
| min | 3.15 | 3.15 | 3.15 |
| per 1000 units≈kg③ — Steel — ≈ | 9.3 | 20.9 | 12.5 |
| h — Stainless Steel — Nominal Size | 3 | 3.2 | 3.2 |
| max | 3.25 | 3.45 | 3.45 |
| min | 2.75 | 2.95 | 2.95 |
| per 1000 units≈kg③ — Stainless Steel — ≈ | 8.2 | 20.6 | 12.3 |
| Size | 22 Large② | 24 | 24 Large② |
|---|---|---|---|
| Bolt size — Metric | M22 | M24 | M24 |
| Inch | 7/8” | - | - |
| d — max | 23.6 | 25.5 | 25.5 |
| min | 23.2 | 25.1 | 25.1 |
| dc — Nominal Size | 42 | 39 | 48.5 |
| max | 42.2 | 39.2 | 48.7 |
| min | 41.8 | 38.8 | 48.3 |
| h — Steel — Nominal Size | 4.6 | 3.4 | 4.6 |
| max | 4.85 | 3.65 | 4.85 |
| min | 4.35 | 3.15 | 4.35 |
| per 1000 units≈kg③ — Steel — ≈ | 31.9 | 17.4 | 45.1 |
| h — Stainless Steel — Nominal Size | 3.2 | 3.2 | 3.2 |
| max | 3.45 | 3.45 | 3.45 |
| min | 2.95 | 2.95 | 2.95 |
| per 1000 units≈kg③ — Stainless Steel — ≈ | 22.2 | 15.9 | 35 |
| Size | 1① | 1 Large① ② | 27 |
|---|---|---|---|
| Bolt size — Metric | - | - | M27 |
| Inch | 1” | 1” | - |
| d — max | 28.1 | 28.1 | 28.6 |
| min | 27.7 | 27.7 | 28.2 |
| dc — Nominal Size | 39 | 48.5 | 42 |
| max | 39.3 | 48.8 | 42.3 |
| min | 38.7 | 48.2 | 41.7 |
| h — Steel — Nominal Size | 3.4 | 4.6 | 5.8 |
| max | 3.65 | 4.85 | 6.05 |
| min | 3.15 | 4.35 | 5.55 |
| per 1000 units≈kg③ — Steel — ≈ | 15.3 | 42 | 31.4 |
| h — Stainless Steel — Nominal Size | 3.2 | 3.2 | 6.8 |
| max | 3.2 | 3.2 | 6.8 |
| min | 2.7 | 2.7 | 6.3 |
| per 1000 units≈kg③ — Stainless Steel — ≈ | 14.2 | 27.9 | 34.5 |
| Size | 27 Large② | 30 | 30 Large② |
|---|---|---|---|
| Bolt size — Metric | M27 | M30 | M30 |
| Inch | - | 1 1/8” | 1 1/8” |
| d — max | 28.6 | 31.6 | 31.6 |
| min | 28.2 | 31.2 | 31.2 |
| dc — Nominal Size | 48.5 | 47 | 58.5 |
| max | 48.8 | 47.3 | 58.8 |
| min | 48.2 | 46.7 | 58.2 |
| h — Steel — Nominal Size | 5.8 | 5.8 | 6.6 |
| max | 6.05 | 6.05 | 6.6 |
| min | 5.55 | 5.55 | 6.1 |
| per 1000 units≈kg③ — Steel — ≈ | 52.7 | 41 | 85.8 |
| h — Stainless Steel — Nominal Size | 6.8 | 6.8 | 6.8 |
| max | 6.8 | 6.8 | 6.8 |
| min | 6.3 | 6.3 | 6.3 |
| per 1000 units≈kg③ — Stainless Steel — ≈ | 53.4 | 44.9 | 91.8 |
| Size | 33 | 33 Large② | 36 |
|---|---|---|---|
| Bolt size — Metric | M33 | M33 | M36 |
| Inch | 1 1/4” | 1 1/4” | 1 3/8” |
| d — max | 34.6 | 34.6 | 37.6 |
| min | 34.2 | 34.2 | 37.2 |
| dc — Nominal Size | 48.5 | 58.5 | 55 |
| max | 48.8 | 58.8 | 55.3 |
| min | 48.2 | 58.2 | 54.7 |
| h — Steel — Nominal Size | 5.8 | 6.6 | 5.8 |
| max | 6.05 | 6.6 | 6.05 |
| min | 5.55 | 6.1 | 5.55 |
| per 1000 units≈kg③ — Steel — ≈ | 38.9 | 80 | 54.9 |
| h — Stainless Steel — Nominal Size | 6.8 | / | 6.8 |
| max | 6.8 | / | 6.8 |
| min | 6.3 | / | 6.3 |
| per 1000 units≈kg③ — Stainless Steel — ≈ | 42.8 | / | 59.6 |
| Size | 36 Large② | 39 | 42 |
|---|---|---|---|
| Bolt size — Metric | M36 | M39 | M42 |
| Inch | 1 3/8” | 1 1/2” | - |
| d — max | 37.6 | 40.6 | 43.4 |
| min | 37.2 | 40.2 | 43 |
| dc — Nominal Size | 63 | 58.5 | 63 |
| max | 63.3 | 58.8 | 63.3 |
| min | 62.7 | 58.2 | 62.7 |
| h — Steel — Nominal Size | 6.6 | 5.8 | 5.8 |
| max | 6.6 | 6.05 | 6.05 |
| min | 6.1 | 5.55 | 5.55 |
| per 1000 units≈kg③ — Steel — ≈ | 91.5 | 58.9 | 79.7 |
| h — Stainless Steel — Nominal Size | / | 6.8 | 6.8 |
| max | / | 6.8 | 6.8 |
| min | / | 6.3 | 6.3 |
| per 1000 units≈kg③ — Stainless Steel — ≈ | / | 67.4 | 75 |
| Size | 45 | 48 | 52 |
|---|---|---|---|
| Bolt size — Metric | M45 | M48 | M52 |
| Inch | 1 3/4” | - | 2” |
| d — max | 46.7 | 50.1 | 54.1 |
| min | 46.2 | 49.6 | 53.6 |
| dc — Nominal Size | 70 | 75 | 80 |
| max | 70 | 75 | 80 |
| min | 68 | 73 | 78 |
| h — Steel — Nominal Size | 7 | 7 | 7 |
| max | 7.75 | 7.75 | 7.75 |
| min | 6.25 | 6.25 | 6.25 |
| per 1000 units≈kg③ — Steel — ≈ | 102 | 120 | 130 |
| h — Stainless Steel — Nominal Size | 6.8 | 6.8 | 9 |
| max | 7.55 | 7.55 | 9.75 |
| min | 6.05 | 6.05 | 8.25 |
| per 1000 units≈kg③ — Stainless Steel — ≈ | 102 | 120 | 180.4 |
| Size | 56 | 60 | 64 |
|---|---|---|---|
| Bolt size — Metric | M56 | M60 | M64 |
| Inch | 2 1/4” | - | 2 1/2” |
| d — max | 59.6 | 63.6 | 67.6 |
| min | 59.1 | 63.1 | 67.1 |
| dc — Nominal Size | 85 | 90 | 95 |
| max | 85 | 90 | 95 |
| min | 83 | 88 | 93 |
| h — Steel — Nominal Size | 7 | 7 | 7 |
| max | 7.75 | 7.75 | 7.75 |
| min | 6.25 | 6.25 | 6.25 |
| per 1000 units≈kg③ — Steel — ≈ | 135 | 152 | 167 |
| h — Stainless Steel — Nominal Size | 9 | 9 | 9 |
| max | 9.75 | 9.75 | 9.75 |
| min | 8.25 | 8.25 | 8.25 |
| per 1000 units≈kg③ — Stainless Steel — ≈ | 213 | 235 | 258 |
| Size | 68 | 72 | 76 |
|---|---|---|---|
| Bolt size — Metric | M68 | M72 | M76 |
| Inch | - | - | 3” |
| d — max | 71.6 | 75.6 | 79.6 |
| min | 71.1 | 75.1 | 79.1 |
| dc — Nominal Size | 100 | 105 | 110 |
| max | 100 | 105 | 110 |
| min | 98 | 103 | 108 |
| h — Steel — Nominal Size | 9.5 | 9.5 | 9.5 |
| max | 10.25 | 10.25 | 10.25 |
| min | 8.75 | 8.75 | 8.75 |
| per 1000 units≈kg③ — Steel — ≈ | 282 | 307 | 333 |
| h — Stainless Steel — Nominal Size | 9 | 9 | 9 |
| max | 9.75 | 9.75 | 9.75 |
| min | 8.25 | 8.25 | 8.25 |
| per 1000 units≈kg③ — Stainless Steel — ≈ | 282 | 307 | 333 |
| Size | 80 | 85 | 90 |
|---|---|---|---|
| Bolt size — Metric | M80 | M85 | M90 |
| Inch | 3 1/8” | - | - |
| d — max | 83.6 | 88.6 | 92.9 |
| min | 83.1 | 88.1 | 92.4 |
| dc — Nominal Size | 115 | 120 | 130 |
| max | 115 | 120 | 130 |
| min | 113 | 118 | 128 |
| h — Steel — Nominal Size | 9.5 | 9.5 | 9.5 |
| max | 10.25 | 10.25 | 10.25 |
| min | 8.75 | 8.75 | 8.75 |
| per 1000 units≈kg③ — Steel — ≈ | 360 | 378 | 477 |
| h — Stainless Steel — Nominal Size | 9 | / | / |
| max | 9.75 | / | / |
| min | 8.25 | / | / |
| per 1000 units≈kg③ — Stainless Steel — ≈ | 360 | / | / |
| Size | 95 | 100 | 105 |
|---|---|---|---|
| Bolt size — Metric | M95 | M100 | M105 |
| Inch | - | 4” | - |
| d — max | 97.9 | 103.9 | 108.9 |
| min | 97.4 | 103.4 | 108.4 |
| dc — Nominal Size | 135 | 145 | 150 |
| max | 135 | 145 | 150 |
| min | 133 | 143 | 148 |
| h — Steel — Nominal Size | 9.5 | 9.5 | 9.5 |
| max | 10.25 | 10.25 | 10.25 |
| min | 8.75 | 8.75 | 8.75 |
| per 1000 units≈kg③ — Steel — ≈ | 498 | 589 | 613 |
| h — Stainless Steel — Nominal Size | / | / | / |
| max | / | / | / |
| min | / | / | / |
| per 1000 units≈kg③ — Stainless Steel — ≈ | / | / | / |
| Size | 110 | 115 | 120 |
|---|---|---|---|
| Bolt size — Metric | M110 | M115 | M120 |
| Inch | - | - | - |
| d — max | 113.9 | 118.9 | 123.9 |
| min | 113.4 | 118.4 | 123.4 |
| dc — Nominal Size | 155 | 165 | 170 |
| max | 155 | 165 | 170 |
| min | 153 | 163 | 168 |
| h — Steel — Nominal Size | 9.5 | 9.5 | 9.5 |
| max | 10.25 | 10.25 | 10.25 |
| min | 8.75 | 8.75 | 8.75 |
| per 1000 units≈kg③ — Steel — ≈ | 635 | 753 | 779 |
| h — Stainless Steel — Nominal Size | / | / | / |
| max | / | / | / |
| min | / | / | / |
| per 1000 units≈kg③ — Stainless Steel — ≈ | / | / | / |
| Size | 125 | 130 |
|---|---|---|
| Bolt size — Metric | M125 | M130 |
| Inch | - | 5” |
| d — max | 128.9 | 133.9 |
| min | 128.4 | 133.4 |
| dc — Nominal Size | 173 | 178 |
| max | 173 | 178 |
| min | 171 | 176 |
| h — Steel — Nominal Size | 9.5 | 9.5 |
| max | 10.25 | 10.25 |
| min | 8.75 | 8.75 |
| per 1000 units≈kg③ — Steel — ≈ | 766 | 792 |
| h — Stainless Steel — Nominal Size | / | / |
| max | / | / |
| min | / | / |
| per 1000 units≈kg③ — Stainless Steel — ≈ | / | / |
Materials
- Steel and stainless steel tabulated by the source (thickness and mass differ per material); coating and hardness per RFQ — state the corrosion duty and vibration environment at quotation
Ordering & documentation
Documents
Shipments of DIN 25201 Dual Lock Washers are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 25201 Dual Lock Washers orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 25201 Dual Lock Washers), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 25201 Dual Lock Washers: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 25201 dual lock washers is 10,000 pieces (applies to the standard sizes and finishes for din 25201 dual lock washers; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 25201 dual lock washers run 3–7 days. Quantities or variants of din 25201 dual lock washers outside the standard range are confirmed at quotation.
Storage & shipping
DIN 25201 Dual Lock Washers are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 25201 dual lock washers dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
What do the ①, ② and ③ markers in the table mean?
They are the source's own footnotes, carried verbatim on the page: ① marks the sizes whose specification is in inches (1/4, 3/8, 1/2, 3/4, 1 — quoted with the source's inch-mark character), ② marks the Large Type variants (same bore, larger outside diameter, for soft or oversized seating surfaces), and ③ marks the mass rows ("per 1000 units≈kg③", the weight of a thousand sets). A size token like "3/8 Large ①②" is therefore the large-type washer for a 3/8-inch bolt. Order by the token your drawing names — Large Type is not interchangeable with the plain size in a bearing check, because the outside diameter and thickness ladders differ — and quote hardness and finish per RFQ, since the collected tables fix geometry and mass only.
What is the MOQ and lead time for DIN 25201 Dual Lock Washers?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 25201 Dual Lock Washers state?
State the full designation (DIN 25201), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 25201 Dual Lock Washers inquiry
- ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
- ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
- ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
- ✓ Describe the bearing surface or locking function, quantity per size and destination.
- ✓ Factory-direct pricing for your DIN 25201 Dual Lock Washers
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support