DIN 1440 Washers for Pins (Medium Type)
DIN 1440 medium-type washers for pins, bores d1 3–100 mm — the plain unhardened washer sized to a clevis or taper-pin shaft, with the collected bore/outside-diameter/thickness ladder and the kg/1000 pcs figures.
Last updated: 2026-11
Specifications
DIN 1440 is the plain washer made to sit under a pin rather than a bolt: same geometry family as a plain flat washer, but the bore ladder follows the pin-diameter series (the source pairs each bore with a reference thread, e.g. the 6 mm bore at M6), and the medium-type wall prints a thickness ladder from 0,8 mm at the 3 mm bore up to 14 mm at the 100 mm bore. The collected table runs 39 sizes, d1 3 → 100 mm (H11 bore tolerance per the source header), with outside diameters d2 6 → 125 mm and the source's weight-per-1000 column — useful when the order is thousands of washers on a light gauge. Fitting note: the washer is the sacrificial bearing face between pin head and the joined part — pick it by pin diameter, not by thread; the "For thread" column is the ordering shorthand the standard prints, and on a clevis assembly the washer must cover the pin head seat without bridging the clevis fork. Where the washer rides a coarse clevis-pin series directly, DIN 1441 (the coarse companion, bore one size over the reference thread) is the counterpart in this catalog. Material, hardness and finish are not tabulated by the collected specification — per RFQ.
| Standard | DIN 1440 — washers for pins, medium type (plain flat washer, pin-bore ladder) |
|---|---|
| Size range | Bore d1 3 – 100 mm (H11), thirty-nine sizes in the collected ladder |
| Outside diameter | d2: 6 → 125 mm across the ladder |
| Thickness | s: 0,8 → 14 mm as printed by the source |
| Weight | kg/1000 pcs column carried verbatim from the source (0,13 → 472) |
| Bore fit (companion print) | Slide-fit by design: the companion collected tech table prints the bore as d min = nominal with a max limit widening from +0,06 mm at the 3 mm bore to +0,22 mm at 100 — loose enough to fit and rotate on the pin, tight enough not to skirt under vibration |
| Materials / finishes | Not tabulated by the collected specification — per RFQ (state pin diameter, joined material and environment at quotation) |
| Bore (d1, H11) | For Thread | Outside Dia. (d2) | Thickness (s) | Weight kg/1000 pcs |
|---|---|---|---|---|
| 3 | M3 | 6 | 0,8 | 0,13 |
| 4 | M4 | 8 | 0,8 | 0,23 |
| 5 | M5 | 10 | 0,8 | 0,36 |
| 6 | M6 | 12 | 1,6 | 1,05 |
| 7 | M7 | 14 | 1,6 | 1,42 |
| 8 | M8 | 16 | 2 | 2,22 |
| 10 | M10 | 20 | 2,5 | 4,56 |
| 12 | M12 | 25 | 3 | 8,99 |
| 13 | M13 | 25 | 3 | 8,36 |
| 14 | M14 | 28 | 3 | 10,8 |
| 16 | M16 | 28 | 3 | 9,68 |
| 18 | M18 | 30 | 4 | 13,8 |
| 20 | M20 | 32 | 4 | 15 |
| 22 | M22 | 34 | 4 | 16,2 |
| 23 | M23 | 36 | 4 | 18,5 |
| 24 | M24 | 38 | 4 | 21,4 |
| 25 | M25 | 40 | 4 | 23,6 |
| 26 | M26 | 40 | 5 | 28,5 |
| 27 | M27 | 40 | 5 | 26,5 |
| 28 | M28 | 42 | 5 | 29,7 |
| 30 | M30 | 45 | 5 | 34,2 |
| 32 | M32 | 50 | 5 | 44,8 |
| 33 | M33 | 50 | 5 | 43,3 |
| 35 | M35 | 52 | 6 | 52,8 |
| 36 | M36 | 52 | 6 | 49,5 |
| 40 | M40 | 58 | 6 | 63,7 |
| 45 | M45 | 62 | 7 | 76,8 |
| 50 | M50 | 68 | 8 | 101 |
| 55 | M55 | 75 | 9 | 141 |
| 60 | M60 | 80 | 9 | 151 |
| 65 | M65 | 90 | 9 | 211 |
| 70 | M70 | 95 | 10 | 250 |
| 75 | M75 | 100 | 10 | 265 |
| 80 | M80 | 110 | 12 | 413 |
| 85 | M85 | 110 | 12 | 371 |
| 90 | M90 | 115 | 12 | 370 |
| 95 | M95 | 120 | 12 | 387 |
| 100 | M100 | 125 | 14 | 472 |
Materials
- Material specified per RFQ — pin washers are usually soft low-carbon steel; where the clevis sees weather or washdown, say so and the finish follows at quotation
Ordering & documentation
Documents
Shipments of DIN 1440 Washers for Pins (Medium Type) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 1440 Washers for Pins (Medium Type) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 1440 Washers for Pins (Medium Type)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 1440 Washers for Pins (Medium Type): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 1440 washers for pins (medium type) is 10,000 pieces (applies to the standard sizes and finishes for din 1440 washers for pins (medium type); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 1440 washers for pins (medium type) run 3–7 days. Quantities or variants of din 1440 washers for pins (medium type) outside the standard range are confirmed at quotation.
Storage & shipping
DIN 1440 Washers for Pins (Medium Type) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 1440 washers for pins (medium type) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
How do I pick between DIN 1440 and DIN 1441 for a pin assembly?
Both are plain washers ordered through the pin's reference thread; they differ in where the bore sits relative to that thread. DIN 1440 (medium) carries the bore at the thread size itself — 6 mm bore for the M6 line — while DIN 1441 (coarse) steps the bore one size up (7 mm for M6), matching clevis pins whose shaft runs over the nominal thread size. Read the two ladders in this catalog side by side: for the M6 line, DIN 1440 gives a 12 mm outside diameter at 1,6 mm thickness, DIN 1441 a 12 mm outside diameter on the 7 mm bore at the same 1,6 mm — the pin, not the thread, decides which bore your shaft actually accepts. What neither table carries is material and hardness: these are RFQ lines, so state the pin diameter, the joined part and the environment at quotation.
What is the MOQ and lead time for DIN 1440 Washers for Pins (Medium Type)?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 1440 Washers for Pins (Medium Type) state?
State the full designation (DIN 1440), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 1440 Washers for Pins (Medium Type) inquiry
- ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
- ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
- ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
- ✓ Describe the bearing surface or locking function, quantity per size and destination.
- ✓ Factory-direct pricing for your DIN 1440 Washers for Pins (Medium Type)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support