DIN 9021 Fender Washers (Large OD)
Large-series flat washers per DIN 9021 (ISO 7093 counterpart) — the fender washer. A much larger outer diameter than DIN 125 spreads bearing load over slotted or oversized holes, thin sheet and soft substrates.
Last updated: 2026-11
Specifications
The DIN 9021 fender washer is a DIN 125 washer with a dramatically wider outer diameter for the same bolt size. The extra diameter exists for one job: spreading the clamp load when the joint cannot carry it locally — over a slotted hole, an oversized hole, or a soft, thin substrate that a standard washer would pull through or trench into. Body panels, plastic housings, thin sheet-metal assemblies and repair work over enlarged holes are its natural territory. The pairing rule mirrors the DIN 125 page: a 200 HV large-series washer still serves assemblies up to property class 8.8; higher-strength joints need the hardened structural equivalents.
| Standard | DIN 9021 — large-series flat washer, "fender" pattern (ISO 7093 counterpart) |
|---|---|
| Function | Large outer diameter spreads bearing load over weak or oversized holes |
| Selection rule | Step up from DIN 125 over a slotted hole or soft sheet to spread bearing |
| Class pairing | 200 HV series — assemblies up to property class 8.8; hardened equivalents above |
| Typical applications | Slotted or oversized holes, thin sheet, plastics and soft substrates, body and fender work |
| For thread | Hole nominal (mm) | ID min (mm) | ID max (mm) | OD max (mm) | OD min (mm) | S nominal (mm) | S max (mm) | S min (mm) | Weight (kg / 1000 pcs) |
|---|---|---|---|---|---|---|---|---|---|
| M2.5 | 2.7 | 2.7 | 2.84 | 8 | 7.64 | 0.8 | 0.9 | 0.7 | 0.28 |
| M3 | 3.2 | 3.2 | 3.38 | 9 | 8.64 | 0.8 | 0.9 | 0.7 | 0.349 |
| M3.5 | 3.7 | 3.7 | 3.88 | 11 | 10.57 | 0.8 | 0.9 | 0.7 | 0.529 |
| M4 | 4.3 | 4.3 | 4.48 | 12 | 11.57 | 1 | 1.1 | 0.9 | 0.774 |
| M5 | 5.3 | 5.3 | 5.48 | 15 | 14.57 | 1.2 | 1.4 | 1 | 1.46 |
| M6 | 6.4 | 6.4 | 6.62 | 18 | 17.57 | 1.6 | 1.8 | 1.4 | 2.79 |
| M7 | 7.4 | 7.4 | 7.62 | 22 | 21.48 | 2 | 2.2 | 1.8 | 5.29 |
| M8 | 8.4 | 8.4 | 8.62 | 24 | 23.48 | 2 | 2.2 | 1.8 | 6.23 |
| M10 | 10.5 | 10.5 | 10.77 | 30 | 29.48 | 2.5 | 2.7 | 2.3 | 12.2 |
| M12 | 13 | 13 | 13.27 | 37 | 36.38 | 3 | 3.3 | 2.7 | 22.2 |
| M14 | 15 | 15 | 15.27 | 44 | 43.38 | 3 | 3.3 | 2.7 | 31.6 |
| M16 | 17 | 17 | 17.27 | 50 | 49.38 | 3 | 3.3 | 2.7 | 40.9 |
| M18 | 20 | 20 | 20.52 | 56 | 54.1 | 4 | 4.6 | 3.4 | 67.4 |
| M20 | 22 | 22 | 22.52 | 60 | 58.1 | 4 | 4.6 | 3.4 | 76.8 |
| M24 | 26 | 26 | 26.84 | 72 | 70.1 | 5 | 6 | 4 | 139 |
| M30 | 33 | 33 | 34 | 92 | 89.8 | 6 | 7 | 5 | 273 |
| M36 | 39 | 39 | 40 | 110 | 107.8 | 8 | 9.2 | 6.8 | 522 |
Materials
- Steel
- Stainless steel
Ordering & documentation
Documents
Shipments of DIN 9021 Fender Washers (Large OD) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 9021 Fender Washers (Large OD) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 9021 Fender Washers (Large OD)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 9021 Fender Washers (Large OD): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 9021 fender washers (large od) is 10,000 pieces (applies to the standard sizes and finishes for din 9021 fender washers (large od); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 9021 fender washers (large od) run 3–7 days. Quantities or variants of din 9021 fender washers (large od) outside the standard range are confirmed at quotation.
Storage & shipping
DIN 9021 Fender Washers (Large OD) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 9021 fender washers (large od) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Fender washer vs standard flat washer — when is the large OD actually needed?
When the hole or the substrate is the weak point, not the bolt. If the hole is slotted or has worn oversized, a DIN 125 washer can tilt into it or pull through; the DIN 9021 large series spans the damaged or elongated area and restores bearing. On thin sheet, plastics and other soft substrates, the wider face lowers the surface pressure so the washer does not trench or tear the material. Where the hole is a normal clearance hole in solid material, the extra diameter adds nothing — DIN 125 remains the standard choice.
Can a large-series fender washer stand in for a hardened washer on a high-strength joint?
No — outer diameter and hardness solve different problems. A DIN 9021 washer is a 200 HV-class part: its large face spreads load over weak substrate, but the material itself is still soft enough that a property class 10.9 or 12.9 bolt's hardened nut face embeds into it, losing preload the same way an undersized washer would. Above class 8.8, the hardened structural equivalents (ASTM F436 or the metric equivalents in the same large series where a large bearing face is genuinely required) are the pairing — and if the joint only needs the extra diameter because the hole is oversized, a hardened large-series washer is the part that answers both constraints at once.
What is the MOQ and lead time for this washer type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes in this washer type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What should an RFQ for this washer type state?
State the standard designation (for example DIN 125 or ASTM F436), the nominal bolt size it must fit, material and hardness requirements, finish (plain, zinc-plated, or hot-dip galvanized where the assembly calls for it), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 9021 Fender Washers (Large OD) inquiry
- ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
- ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
- ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
- ✓ Describe the bearing surface or locking function, quantity per size and destination.
- ✓ Factory-direct pricing for your DIN 9021 Fender Washers (Large OD)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support