DIN 5417 Snap Rings for Bearings with Ring Groove

DIN 5417 snap rings retaining bearings with ring groove, bores 30 to 400: ring diameters d2 min/max, section g/s, groove and abutment dimensions — 2011 and 1976 editions.

Last updated: 2026-11

Request a Quote

DIN 5417 Snap Rings for Bearings with Ring Groove in an industrial setting
Illustrative image redrawn from real DIN 5417 Snap Rings for Bearings with Ring Groove product references — not a photograph of stocked items.

Specifications

DIN 5417 is the snap ring that retains a bearing whose outer ring carries a snap-ring groove — the external retaining ring that snaps into the housing bore and shoulders the bearing, deleting the housing shoulder that machining a plain bore would need. The collected 06/2011-edition table runs bores d1 30 to 400 with the free-state and installed ring diameters d2 min/max (383/386 at the 400 end), section g, ring thickness s (4.5 at 400) and the housing bore limit d4 max (414 at 400); the superseded 12/1976 edition is transcribed as a second table carrying the groove-side details (b, d3, d4, m) alongside the common dimensions — both verbatim. The ring orders as part of a system: ring + grooved bearing outer ring + housing tolerance (d4) — the bore limit column is the housing shop's acceptance dimension, which is why it sits in the ring standard.

Standard / scope DIN 5417 snap rings for bearings with ring groove — bores d1 30 to 400, edition 06/2011; superseded 12/1976 edition transcribed as a separate table
Ring diameters d2 min/max per size (383/386 at d1 400) — free vs installed state against the housing bore
Section / thickness g and s per size (s 4.5 at the 400 end) — the snap section that must open to bore diameter without set
Housing / groove data d4 max housing bore limit (414 at 400); the 1976-edition table carries the groove-side columns b, d3, d4, m verbatim
Not tabulated Material/spring grade, plier size, finish — per RFQ
DIN 5417 snap rings for bearings with ring groove — 06/2011 edition, ring geometry by bore d1Dimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
d1 nom dimensiond2 mind 2 maxgsd4 max≈ weigth in kg x1000 pcs
3027.527.931.1234.72.8
3229.529.931.1236.73
3532.532.931.1239.73.2
3734.134.531.1241.33.4
4037.437.831.1244.63.6
423939.531.1246.33.8
444141.531.1248.34
4743.844.341.1252.75.3
5046.847.341.1255.75.8
5248.949.441.1257.95.9
5551.852.341.1260.76.2
5652.653.241.1261.76.5
5854.655.241.1263.76.7
6258.45941.7067.710.5
6561.46241.7070.711
6863.664.251.7074.612.6
7267.668.251.7078.614.7
7570.671.251.7081.615.3
8075.676.251.7086.616.3
8580.681.251.7091.617.5
9085.686.252.4696.526.6
9590.691.252.46101.628.2
10095.496.252.46106.529.2
110105.4106.252.46116.632.8
115110.411.252.46121.634.4
120113.8114.672.82129.760.6
125118.8119.672.82134.763
130123.8124.672.82139.765.6
140133.4134.672.82149.770.6
145138.4139.672.82154.773
150143.3144.572.82159.777.2
160153.3154.572.82168.781
170161.7162.9103.1182.9122
180171.6172.8103.1192.9128
190181.4182.8103.1202.9139
200191.4192.8103.1212.9148
210201.3202.7103.1222.8156
215206.3207.7103.1227.8160
225214.7216.1103.5237196
230219.6221103.5242200
240229.6231103.5252209
250239.6241103.5262220
260247.5250103.5272230
270257.5260103.5282240
280267.5270103.5292250
290277.5280103.5302260
300284.5287104.5314400
310294297104.5324412
320304307104.5334420
340324327104.5354446
360343346104.5374475
370353356104.5384485
380363366104.5394500
400383386104.5414525
  • Source spanning title row carried verbatim: "Dimensions in mm - source DIN 5417 Publication date: 06-2011".
  • Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (9/7) — grid padded empty; per-row pre-pad widths: 9,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7.
DIN 5417 snap rings — superseded 12/1976 edition, ring and groove geometry by bore d1Dimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
d1 nom dimensiond2gsbd3d4m≈ weigth in kg x1000 pcs
3027.431.123.2528.1734.671.352.78
3229.431.123.2530.1536.651.352.98
3532.431.123.2533.1739.671.353.22
373431.123.2534.7741.271.353.36
4037.331.123.2538.1044.61.353.6
4238.931.123.2539.7546.251.353.75
4440.931.123.2541.7548.251.354
4743.741.124.0444.6052.681.355.3
5046.741.124.0447.655.681.355.78
5248.841.124.0449.7357.811.355.92
5551.741.124.0452.6060.681.356.17
5652.441.124.0453.661.681.356.45
5854.441.124.0455.663.681.356.67
6258.241.704.0459.6167.691.910.5
6561.241.704.0462.670.681.911
6863.451.704.8564.8274.521.912.6
7267.451.704.8568.8178.511.914.7
7570.451.704.8571.8381.531.915.3
8075.451.704.8576.8186.511.916.3
8580.451.704.8581.8191.511.917.5
9085.452.464.8586.7996.492.726.6
9590.452.464.8591.82101.522.728.2
10095.252.464.8596.8106.52.729.2
110105.252.464.85106.81116.512.732.8
115110.252.464.85111.81121.512.734.4
120113.652.827.21115.21129.633.160.6
125118.652.827.21120.22134.643.163
130123.652.827.21125.22139.643.165.5
14013372.827.21135.23149.653.170.6
14513872.827.21140.23154.653.173
150142.972.827.21145.24159.663.177.2
160152.972.827.21155.22168.643.181
170161.373.19.6163.65182.853.5122
180171.273.19.6173.66192.863.5128
19018173.19.6183.64202.843.5139
20019173.19.6193.65212.853.5148
210200.973.19.6203.6222.83.5156
215205.973.19.6208.6227.83.5160
225214.373.5102172374.5196
230219.273.5102222424.5200
240229.273.5102322524.5209
250239.273.5102422624.5220
260248103.5102522724.5230
270258103.5102622824.5240
280268103.5102722924.5250
290278103.5102823024.5260
300285104.5122903145.5400
310295104.5123003245.5412
320305104.5123103345.5420
340325104.5123303545.5446
360344104.5123503745.5475
370354104.5123603845.5485
380364104.5123703945.5500
400384104.5123904145.5525
  • Source spanning title row carried verbatim: "Dimensions in mm - source DIN 5417 Publication date: 12/1976".

Materials

  • Snap rings order in spring steel (hardened and tempered for snap set), phosphate or zinc finishes; stainless for corrosive housings at reduced snap life. Order by bearing bore designation with the housing bore tolerance stated — the ring, the bearing groove and the d4 bore limit are one fit system, and re-machining the housing without re-checking d4 is the usual failure path

Ordering & documentation

Documents

Shipments of DIN 5417 Snap Rings for Bearings with Ring Groove are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 5417 Snap Rings for Bearings with Ring Groove orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 5417 Snap Rings for Bearings with Ring Groove), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 5417 Snap Rings for Bearings with Ring Groove: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 5417 snap rings for bearings with ring groove is 10,000 pieces (applies to the standard sizes and finishes for din 5417 snap rings for bearings with ring groove; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 5417 snap rings for bearings with ring groove run 3–7 days. Quantities or variants of din 5417 snap rings for bearings with ring groove outside the standard range are confirmed at quotation.

Storage & shipping

DIN 5417 Snap Rings for Bearings with Ring Groove are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 5417 snap rings for bearings with ring groove dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

What does the d4 max column govern — and who uses it?

It is the largest housing bore the ring system accepts: the ring is sized to seat at its installed diameter d2 against a bore within tolerance, and d4 max (414 at the 400 end) is the point past which the ring no longer develops enough hoop contact to shoulder the bearing — or falls out. The column belongs to the housing shop: it is the acceptance check after boring, the same way a shaft diameter is checked before fitting a bearing. In practice the failures come from two directions — bores machined oversize past d4 (ring loose, bearing walks) and bores left rough or chamfered oversize at the ring seat (ring snaps into a bigger effective diameter). Check the bored housing against d4 max before snapping the ring, and keep the ring seat face square.

Why are there two edition tables with different column sets?

The source page prints the current 06/2011 edition and the superseded 12/1976 edition as separate tables, and they organize the data differently: the current table carries the ring's own dimensions (d2 min/max, g, s, d4 max, mass), while the 1976 table also prints the groove-side columns (b, d3, d4, m) that legacy drawings reference. Both are transcribed verbatim — nothing merged — because a maintenance shop auditing a 1980s housing drawing will find its groove dimensions in the old table and its ring dimensions in the new one. For new design, use the 2011 edition and the bearing maker's groove data; for replacement against legacy drawings, read the 1976 table and order the ring by the same d1 designation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 5417 Snap Rings for Bearings with Ring Groove inquiry

  • ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
  • ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
  • ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
  • ✓ Describe the bearing surface or locking function, quantity per size and destination.
  • ✓ Factory-direct pricing for your DIN 5417 Snap Rings for Bearings with Ring Groove
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.