DIN 125 Plain Flat Washers (Form A/B)
Plain flat washers per DIN 125 Form A (unchamfered; ISO 7089) and Form B (chamfered; ISO 7090) — the standard washer under hex bolts and nuts. 200 HV hardness class, dimensioned for assemblies up to property class 8.8, in steel, stainless and brass.
Last updated: 2026-11
Specifications
The DIN 125 flat washer is the default bearing part of a bolted joint: it spreads the clamp load, covers the clearance hole, and gives the nut or bolt head a true face to turn against. Form A is unchamfered and corresponds to ISO 7089; Form B has a chamfer and corresponds to ISO 7090. Hardness matters when pairing with the bolt: the 200 HV plain washer is dimensioned for assemblies up to property class 8.8 — a class 10.9 or 12.9 joint needs a hardened washer instead, because the hardened nut face will dish and embed into an unhardened washer and bleed off preload. For oversize or slotted holes and soft sheet, step up to the large-series DIN 9021 washer.
| Standard | DIN 125 Form A (unchamfered; ISO 7089) / Form B (chamfered; ISO 7090) — plain washers for hex bolts and nuts |
|---|---|
| Hardness class | 200 HV plain washer — dimensioned for assemblies up to property class 8.8 |
| Example size (M10) | 20 mm outer diameter × 10.5 mm inner diameter — about 228 mm² bearing area |
| Function | Distributes the clamp load and gives the nut or head a true bearing face |
| Class pairing | Up to class 8.8; class 10.9/12.9 joints call for a hardened washer instead |
| Typical applications | General bolted joints through clearance holes in steel, stainless and brass builds |
| Nominal diameter | Hole diameter D (mm) | Outside diameter D1 (mm) | Thickness S (mm) | Weight (kg / 1000 pcs) |
|---|---|---|---|---|
| M3 | 3.2 | 7 | 0.5 | 0.12 |
| M4 | 4.3 | 9 | 0.8 | 0.3 |
| M5 | 5.3 | 10 | 1 | 0.44 |
| M6 | 6.4 | 12.5 | 1.6 | 1.14 |
| M7 | 7.4 | 14 | 1.6 | 1.39 |
| M8 | 8.4 | 17 | 1.6 | 2.14 |
| M10 | 10.5 | 21 | 2 | 4.08 |
| M12 | 13 | 24 | 2.5 | 6.27 |
| M14 | 15 | 28 | 2.5 | 8.6 |
| M16 | 17 | 30 | 3 | 11.3 |
| M18 | 19 | 34 | 3 | 14.7 |
| M20 | 21 | 37 | 3 | 17.2 |
| M22 | 23 | 39 | 3 | 18.4 |
| M24 | 25 | 44 | 4 | 32.3 |
| M27 | 28 | 50 | 4 | 42.8 |
| M30 | 31 | 56 | 4 | 53.6 |
| M33 | 34 | 60 | 5 | 75.4 |
| M36 | 37 | 66 | 5 | 92 |
| M39 | 40 | 72 | 6 | 133 |
| M42 | 43 | 78 | 7 | 183 |
| M45 | 46 | 85 | 7 | 220 |
| M52 | 54 | 98 | 8 | 330 |
| M56 | 58 | 105 | 9 | 425 |
| M64 | 65 | 115 | 9 | 492 |
| M72 | 74 | 125 | 10 | 625 |
- Row 21 (M45): The source table labels "M45" twice; the second M45 row (50/92/8, weight 294) is the M48 series step mislabeled by the source and is dropped here — the correct "M48" designation is not printed in the source.
- Row 23 (M56): After the M56 row the source prints "M58" (60/110/9, weight 471); the dimension step matches M60, so the label is a source misprint. The row is dropped — the correct "M60" designation is not printed in the source.
Materials
- Steel
- Stainless steel
- Brass
Ordering & documentation
Documents
Shipments of DIN 125 Plain Flat Washers (Form A/B) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 125 Plain Flat Washers (Form A/B) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 125 Plain Flat Washers (Form A/B)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 125 Plain Flat Washers (Form A/B): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 125 plain flat washers (form a/b) is 10,000 pieces (applies to the standard sizes and finishes for din 125 plain flat washers (form a/b); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 125 plain flat washers (form a/b) run 3–7 days. Quantities or variants of din 125 plain flat washers (form a/b) outside the standard range are confirmed at quotation.
Storage & shipping
DIN 125 Plain Flat Washers (Form A/B) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 125 plain flat washers (form a/b) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
When does a DIN 125 washer need to be upgraded?
Two directions of upgrade, both driven by the joint. Against higher-strength bolts — property class 10.9 or 12.9 — the 200 HV plain washer is no longer enough: the hardened nut face dishes and embeds into it under load, so a hardened washer (ASTM F436 or the metric structural equivalents) belongs in the assembly. Against a slotted or oversized hole, or a soft substrate such as sheet or plastic, the standard outer diameter no longer covers the hole — the large-series DIN 9021 / ISO 7093 washer spreads the bearing instead. For ordinary class 8.8-and-below joints through normal clearance holes, DIN 125 is the correct, economical default.
What is the MOQ and lead time for this washer type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes in this washer type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What should an RFQ for this washer type state?
State the standard designation (for example DIN 125 or ASTM F436), the nominal bolt size it must fit, material and hardness requirements, finish (plain, zinc-plated, or hot-dip galvanized where the assembly calls for it), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 125 Plain Flat Washers (Form A/B) inquiry
- ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
- ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
- ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
- ✓ Describe the bearing surface or locking function, quantity per size and destination.
- ✓ Factory-direct pricing for your DIN 125 Plain Flat Washers (Form A/B)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support