DIN 463 Tab Washers (2 Tabs)

Tab washers per DIN 463 with two tabs at right angles — one tab locks against the component face, the other bends up against the flattened nut or screw flat for a positive mechanical lock, M3 through M52 in the collected table.

Last updated: 2026-11

Request a Quote

DIN 463 Tab Washers (2 Tabs) in an industrial setting
Illustrative image redrawn from real DIN 463 Tab Washers (2 Tabs) product references — not a photograph of stocked items.

Specifications

The DIN 463 tab washer is a positive mechanical lock: instead of relying on friction, one of its two tabs seats against a shoulder or the machined face of the assembly, and after tightening, the second tab — set at a right angle to the first — is bent up against a flat of the nut or screw head. The joint then cannot rotate back off without physically breaking or re-bending the tab, which is why tab washers remain standard on rotating equipment, rail and heavy machinery where a loose nut is a safety event. The collected table runs M3 to M52 with tab width B, washer diameter D, overall length L and tab position L1 per size; because the tab must bend, selection also depends on the nut position at final tightening — the L1 ladder gives the reachable bend positions per size.

Standard DIN 463 — tab washer with 2 tabs, long and short tab at right angles
Locking mechanism Internal tab seats against the component; outer tab bends up against a nut or screw flat after tightening — positive mechanical lock, no friction reliance
Size range M3 through M52 — washer diameter D 7 mm to 98 mm, overall length L 13 mm to 85 mm
Tab geometry Tab width B 4–44 mm; tab position L1 5–53 mm per size (bend against the nearest flat at final tightening)
Thickness 0.38 mm (M3–M4), 0.5 mm (M5–M7), 0.75 mm (M8–M10), 1 mm (M12–M24), 1.6 mm (M27–M52)
Installation The outer tab bends up against the nearest nut or screw flat at final tightening; the L1 ladder gives the reachable bend positions per size
DIN 463 tab washers with 2 tabs (long and short tab at right angles) - per-size dimensions (M3 - M52)All dimensions in millimeters; weight per 1000 pieces.
For nominal threadd (mm)B (mm)D (mm)L (mm)L1 (mm)h (mm)Weight (kg / 1000 pcs)
M33.2471350.380.229
M3.53.748135.50.380.251
M44.359146.50.380.327
M55.36101680.50.55
M66.4712.51890.50.8
M77.471418100.50.9
M88.481720110.751.71
M1010.5102122130.752.51
M12131224281514.41
M14151228281615.09
M16171530321816.3
M18191834362018.24
M20211837362119
M222320394223110
M242520444225112
M2728235048291.625.3
M3031265652321.631.4
M3334286056341.635.6
M3637306660381.642.5
M3940327264411.649.7
M4243357870441.659.2
M4546388575481.670.3
M4850409280501.680
M5254449885531.690.2

Materials

  • Material and finish specified per RFQ — the collected specification table covers geometry only

Ordering & documentation

Documents

Shipments of DIN 463 Tab Washers (2 Tabs) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 463 Tab Washers (2 Tabs) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 463 Tab Washers (2 Tabs)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 463 Tab Washers (2 Tabs): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 463 tab washers (2 tabs) is 10,000 pieces (applies to the standard sizes and finishes for din 463 tab washers (2 tabs); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 463 tab washers (2 tabs) run 3–7 days. Quantities or variants of din 463 tab washers (2 tabs) outside the standard range are confirmed at quotation.

Storage & shipping

DIN 463 Tab Washers (2 Tabs) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 463 tab washers (2 tabs) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why use a tab washer instead of a lock nut or threadlocker?

Because it does not depend on friction or chemistry. A tab washer deforms: one tab is clamped, the other bent up against a flat, and the nut physically cannot rotate without destroying the tab. That lock survives temperature swings that soften threadlockers and vibration that walks a friction lock nut loose, which is why tab washers hold their place on rotating and heavy machinery. The tradeoff is assembly effort: the tab is bent at final nut position, so plan the bend so the nut reaches its final torque with a reachable flat — and a tab that has been bent once does not fold back and forth indefinitely, so treat a re-tightened joint as a new-washer job.

What is the MOQ and lead time for this washer type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Confirm the exact schedule against quantity and size mix at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 463 Tab Washers (2 Tabs) inquiry

  • ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
  • ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
  • ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
  • ✓ Describe the bearing surface or locking function, quantity per size and destination.
  • ✓ Factory-direct pricing for your DIN 463 Tab Washers (2 Tabs)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.