DIN 126 Flat Washers (Un-chamfered, Normal Series)

DIN 126 flat washers, normal series without chamfer, M5 to M160 — the plain bearing washer in its simplest form — with the full collected 35-size table: bore and outside diameters, thickness limits and the source's reference mass per 1000 units.

Last updated: 2026-11

Request a Quote

DIN 126 Flat Washers (Un-chamfered, Normal Series) in an industrial setting
Illustrative image redrawn from real DIN 126 Flat Washers (Un-chamfered, Normal Series) product references — not a photograph of stocked items.

Specifications

DIN 126 is the plain flat washer in its un-chamfered form: a flat ring that spreads the fastener's clamp load over a wider bearing surface, covers oversized or slotted holes, and protects the workpiece face — with no countersink on the bore, which keeps it the cheapest washer in the normal series and the right choice wherever the washer does not need to sit tight against a formed head radius. The collected table runs M5 to M160 — from small machinery work up to the largest structural and plant sizes — with the bore d (nominal and max), outside diameter d c (nominal and min), the h thickness triple (Nominal Size / max / min), and the source's reference mass per 1000 units, the figure bulk purchasers price the washer line from. Where a chamfered bore must seat against a rolled-head fillet, the counterpart is DIN 125 on this site; for large fender-style coverage see DIN 9021; for structural bolting the HV line is DIN 6916. Materials and finishes are not printed by the collected specification and stay per RFQ.

Standard DIN 126 — flat washers, normal series, un-chamfered (product grade C)
Series M5 – M160 (35 sizes tabulated)
Tabulated geometry Per size: bore d (min=nominal size / max), outside diameter d c (max=nominal size / min), thickness h (Nominal Size / max / min), reference mass per 1000 units ≈ kg
Form Plain flat ring, no bore chamfer — load spreading, hole coverage and face protection
Family note Chamfered counterpart DIN 125; large-OD fender form DIN 9021; structural HV washer DIN 6916
Materials / strength Not tabulated by the collected specification — per RFQ (material and finish per drawing callout)
DIN 126 flat washers (un chamfered, normal series) - per-size dimensions (M5 - M160)All dimensions in millimeters. Attribute labels follow the source: d = bore diameter min=nominal size / max; d c = outside diameter max=nominal size / min; h = washer thickness Nominal Size / max / min. The final column is the source's approximate mass per 1000 units in kilograms (reproduced as printed). Materials and finishes are not tabulated by the collected specification.
Nominal threadd — min=nominal sized — maxd c — max=nominal sized c — minh — Nominal Sizeh — maxh — minper 1000 units ≈ kg
M55.55.8109.111.20.80.43
M66.66.961210.91.61.91.30.991
M77.67.961412.91.61.91.31.36
M899.361614.91.61.91.31.73
M101111.432018.722.31.73.44
M1213.513.932422.72.52.82.26.07
M1415.515.932826.72.52.82.28.38
M1617.517.933028.733.62.411
M182020.523432.433.62.414
M202222.523735.433.62.416.4
M222424.523937.433.62.417.5
M242626.524442.444.63.431.1
M273030.525048.444.63.439.5
M303333.625654.144.63.450.5
M3336376058.156471
M3639406664.156487.4
M3942437270.1675127
M4245467876.178.25.8175
M4548498582.878.25.8212
M485253.29289.889.26.8284
M525657.29895.889.26.8319
M566263.2105102.8910.27.8398
M606667.2110107.8910.27.8430
M647071.2115112.8910.27.8462
M727879.2125122.51011.28.8588
M808687.4140137.51213.610.4903
M909697.4160157.51213.610.41210
M100107108.4175172.51415.612.41660
M110117118.4185182.11415.612.41770
M120127128.6210207.11617.614.42760
M125132133.6220217.11617.614.43060
M130137138.6220217.11617.614.42920
M140147148.6240237.11819.617.43990
M150158159.6250247.11819.617.44170
M160168169.6250247.11819.617.43800

Materials

  • Material and finish specified per RFQ — the collected specification table covers geometry and reference mass only

Ordering & documentation

Documents

Shipments of DIN 126 Flat Washers (Un-chamfered, Normal Series) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 126 Flat Washers (Un-chamfered, Normal Series) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 126 Flat Washers (Un-chamfered, Normal Series)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 126 Flat Washers (Un-chamfered, Normal Series): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 126 flat washers (un-chamfered, normal series) is 10,000 pieces (applies to the standard sizes and finishes for din 126 flat washers (un-chamfered, normal series); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 126 flat washers (un-chamfered, normal series) run 3–7 days. Quantities or variants of din 126 flat washers (un-chamfered, normal series) outside the standard range are confirmed at quotation.

Storage & shipping

DIN 126 Flat Washers (Un-chamfered, Normal Series) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 126 flat washers (un-chamfered, normal series) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

DIN 126 or DIN 125 — when does the missing chamfer matter?

When the washer meets a formed head fillet. DIN 125's chamfered bore clears the radius under a rolled or washer-faced head so the washer seats flat against it; DIN 126's square-cut bore can sit proud on one side there, tilting the washer and loading it on an edge. In normal bolt-through-plate work with a plain nut and bolt, the chamfer buys nothing — DIN 126 does the same load-spreading job at lower cost, and in the larger sizes above the usual DIN 125 range it is often the stocked option. Check which one the joint drawing calls for before substituting.

What is the MOQ and lead time for this washer type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 126 Flat Washers (Un-chamfered, Normal Series) inquiry

  • ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
  • ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
  • ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
  • ✓ Describe the bearing surface or locking function, quantity per size and destination.
  • ✓ Factory-direct pricing for your DIN 126 Flat Washers (Un-chamfered, Normal Series)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.