DIN 6913 Spring Lock Washers with Safety Rings (M3 – M42)

DIN 6913 spring lock washers with safety rings — curved spring washers whose inner edge carries a separate safety ring, dimensioned d1/d2/d3/s/h1/h2/k/r for M3 to M42 with weights per 1000 pieces, for bolted joints where the ring must stay captured when the bolt is released.

Last updated: 2026-11

Request a Quote

DIN 6913 Spring Lock Washers with Safety Rings (M3 – M42) in an industrial setting
Illustrative image redrawn from real DIN 6913 Spring Lock Washers with Safety Rings (M3 – M42) product references — not a photograph of stocked items.

Specifications

A DIN 6913 washer is a spring lock washer with a second part doing the safety job: the curved spring washer provides the resilient face and preload retention, while the separate safety ring sits on the washer's inner edge so that when the bolt is loosened the washer cannot fly off, drop into the assembly or get lost inside a housing — the reason this pattern shows up on equipment where a dropped fastener is a safety or contamination event (frames, covers, maintenance-facing assemblies). The collected grid runs M3 to M42 in one continuous ladder: d1 (washer bore) 3,1 to 42,5, d2 5,4 to 60, d3 (safety-ring seat) 6,7 to 74 in min./max. bands, thickness s 1,25 to 11,1, heights h1/h2 to 26,6/25, k and r to 0,8/2, and source weights 0,3 to 269 kg per 1000 pieces. Reading notes before engineering use: the source's min./max. sub-header band is incomplete and partly inverted (d1 has only a "Min." label; d3/h1/h2 print "Max." before "Min.") — the columns here follow the captured DOM order, verbatim and flagged; the M3 row prints "-" for k; and a few neighbouring steps are non-monotonic as printed (M24 weight 46,1 vs M22 46,6; M30 k/r below M27's). None of these are silently corrected. Materials and finishes are not printed on the source page and are not claimed — per RFQ.

Standard / scope DIN 6913 spring lock washers with safety rings (source title as printed), nominal sizes M3 to M42, 20 sizes in one ladder
Bore (d1) 3,1 (M3) to 42,5 (M42) per the source's "Min."-labelled column
Outer / ring diameters d2 5,4 to 60; d3 (safety-ring seat) min./max. 6,7/7 (M3) to 69/74 (M42) — the d3 pair prints "Max." before "Min." in the source, order carried verbatim
Thickness / heights s 1,25 (M3) to 11,1 (M42); h1 max./min. 3/2 to 26,6/17,8; h2 max./min. 3/2 to 25/16,2 — same verbatim Max.-before-Min. order
k / r k 0,15 to 0,8 (M3 prints "-"); r 0,2 to 2
Weight 0,3 (M3) to 269 (M42) kg per 1000 pieces per the source's own header column
Not tabulated No materials, finishes, spring-curve load data or equivalents printed on the source page — per RFQ against the standard document
Spring lock washers with safety rings to DIN 6913dimensions in mm; weight column is kg per 1000 pieces per the source's own header
Nominal sized1 (Min.)d2d3 (Max.)d3 (Min.)sh1 (Max.)h1 (Min.)h2 (Max.)h2 (Min.)krWeight kg/1000pcsFor thread size
33,15,476,71,253232-0,20,3M3
44,16,798,71,754,22,83,92,50,150,40,68M4
55,18,251110,624,83,24,52,90,150,41,18M5
66,19,51211,62,255,43,653,20,20,51,49M6
88,212,51615,62,756,64,463,80,30,83,18M8
1010,2151918,537,24,86,64,20,30,84,7M10
1212,217,52221,53,58,45,67,64,80,41,27,28M12
1414,2212726,54,510,87,2106,40,41,214,5M14
1616,2243029,5512811,270,41,219,8M16
1818,2273433,55,513,28,812,480,41,227,6M18
2020,2303837,26,114,69,813,890,41,238,3M20
2222,5344241,26,615,810,6159,80,41,246,6M22
2424,5344241,27,11711,41610,40,5246,1M24
2727,5394847,27,11711,41610,40,5267,4M27
3030,54252517,11711,415,49,80,8276,3M30
3333,54858578,119,41317,811,40,82105M33
3636,55262619,121,814,620,2130,82141M36
3939,556706910,124,216,22314,60,82208M39
4242,560757411,126,617,82516,20,82269M42
  • Row 1 (3): the M3 row prints '-' (no value) in the k column — the source tabulates no k at M3; carried verbatim.
  • Row 13 (24): the ladder prints non-monotonic steps in places as captured: M24 weight 46,1 below M22 46,6 (row 12); M30 k/r 15,4/9,8 below M27 16/10,4 (row 14) — verbatim, flagged, not smoothed; verify a leaned-on row against the standard document.
  • the source's min./max. sub-header band pairs are its own printing: d1 carries a single 'Min.' label (no Max.); d3, h1 and h2 print 'Max.' before 'Min.' — column labels above follow the captured DOM order verbatim, not re-ordered into min./max.
  • the source page prints no materials, finishes, load data or equivalents — only this grid; everything outside it is per RFQ.

Materials

  • The source page prints no materials or finish line, so this page makes no material claim: spring lock washers live or die by their spring properties, which is exactly why the class of steel (spring steel, stainless spring grades) and any coating belong on the RFQ as explicit requirements matched to a certificate — not assumed from a catalogue line. State size, material class, finish and quantity per size; requirements outside the tabulated grid (sizes past M42, load-tested batches, special finishes) are confirmed at quotation.

Ordering & documentation

Documents

Shipments of DIN 6913 Spring Lock Washers with Safety Rings (M3 – M42) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 6913 Spring Lock Washers with Safety Rings (M3 – M42) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 6913 Spring Lock Washers with Safety Rings (M3 – M42)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 6913 Spring Lock Washers with Safety Rings (M3 – M42): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 6913 spring lock washers with safety rings (m3 – m42) is 10,000 pieces (applies to the standard sizes and finishes for din 6913 spring lock washers with safety rings (m3 – m42); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 6913 spring lock washers with safety rings (m3 – m42) run 3–7 days. Quantities or variants of din 6913 spring lock washers with safety rings (m3 – m42) outside the standard range are confirmed at quotation.

Storage & shipping

DIN 6913 Spring Lock Washers with Safety Rings (M3 – M42) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 6913 spring lock washers with safety rings (m3 – m42) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

The min./max. labels under d3, h1 and h2 run "Max." then "Min." — is that column order a transcription error?

No — it is the source's own printing, captured cell-by-cell from the live DOM: the sub-header band prints Max. before Min. under d3, h1 and h2 (and gives d1 only a "Min." label), and the data values follow that order (M4: d3 9 then 8,7; h1 4,2 then 2,8). The sensible reading — the larger "outer" figure printed first — matches the values, so nothing here needs correcting, but this page does not silently swap the columns into min./max. order either: both header order and values are carried verbatim and flagged. For design use, take the pair as a band (e.g. d3 of an M4 washer sits between 8,7 and 9) rather than trusting the label sequence for a tolerance stack; the standard document is the authority if a drawing needs the label semantics resolved.

Why does the M3 row print "-" for k, and why do some neighbouring sizes print smaller values than the size before them?

Both are the source's prints, carried verbatim. The M3 row's k cell is a literal "-" (the source tabulates no k value at M3); every other size prints one (0,15 up to 0,8). And the ladder is not perfectly monotonic as printed: M24's weight (46,1) is lower than M22's (46,6), and M30's k/r (15,4/9,8) sit below M27's (16/10,4). These could be source rounding or genuine standard behavior — this page does not adjudicate or smooth them, it flags them. Practical consequence: use the printed value for the size you are actually buying, and if a design calculation leans on one of the non-monotonic steps, verify that one row against the standard document before finalising.

What does the safety ring actually do — and when would I pick DIN 6913 over a plain spring lock washer?

The safety ring is a captive ring on the washer's inner edge: when the bolt is undone, the spring washer stays on the bolt or in the assembly instead of springing free. That is a service-behavior difference, not a clamping-force upgrade — a plain curved spring lock washer (e.g. the DIN 137B-type parts on this site) retains preload similarly but is loose once the clamp is off. Pick DIN 6913 where the loose-washer consequence matters: overhead or vertical covers, equipment opened repeatedly for maintenance, food or clean environments where a dropped part is contamination, or any assembly where a lost washer stops the line. The tabulated d3 column is the ring seat envelope — check it against the mating bolt clearance if the ring must pass over the thread.

What should an RFQ for DIN 6913 washers state?

Nominal size (M3-M42 per the ladder), the material class your spring requirements call out (spring steel vs stainless spring grade — the source tabulates none, so this is a quotation item), finish if not plain, whether the safety ring must be supplied fitted or separately, quantity per size — and, if your joint design leans on one of the flagged prints (the M3 k gap or a non-monotonic step), the note that those rows are quoted verbatim from the collected reference and should be confirmed against the standard document. Anything outside the table — load-tested batches, sizes past M42, special finishes — is confirmed at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 6913 Spring Lock Washers with Safety Rings (M3 – M42) inquiry

  • ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
  • ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
  • ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
  • ✓ Describe the bearing surface or locking function, quantity per size and destination.
  • ✓ Factory-direct pricing for your DIN 6913 Spring Lock Washers with Safety Rings (M3 – M42)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.