Insulating Isolation Washer Sets

Washer-and-sleeve isolation sets that electrically separate the fastener from the mounted component — flat, sleeve, cup, countersunk, perforated and pronged styles in ceramic, fiberglass, hard fiber, mica and plastic, covering screw sizes from No. 00 through 1/4" (inch and metric).

Last updated: 2026-11

Request a Quote

Insulating Isolation Washer Sets in an industrial setting
Illustrative image redrawn from real Insulating Isolation Washer Sets product references — not a photograph of stocked items.

Specifications

An isolation washer set does a job a plain washer cannot: it breaks the electrical path between the screw and the part it mounts. The set pairs an insulating washer under the head with an insulating sleeve through the hole, so neither the shank nor the head touches the chassis — the standard remedy when a grounded housing would short a sensor body, a bus bar, an anodized or painted enclosure that must stay isolated, or a galvanically mismatched pair of metals. Styles span flat, sleeve, cup, countersunk, perforated and pronged washers; materials run from hard fiber and plastic for everyday isolation to mica and ceramic where temperature climbs. Coverage starts at the smallest instrument screws — No. 00 — and runs through 1/4", in both inch and metric systems, which is why these sets are the default kit for electrical and electronics assembly work.

Function Electrically isolates the screw from the mounted component — washer and sleeve together break the metal path
Styles Sleeve, flat, cup, countersunk, perforated and pronged washers
Materials Ceramic, fiberglass, hard fiber, mica, plastic
Screw size coverage No. 00 through 1/4" (inch); metric series offered alongside — both systems in the same catalog line
Sleeve geometry band Sleeve ODs from 0.112" to 0.209"; sleeve heights from 0.015" to 0.063" across the range
Performance options Electrical insulating, flame retardant, acid resistant, chemical resistant grades
Typical applications Sensor and instrument mounting, bus bar standoffs, enclosure electronics, galvanic isolation of mixed-metal assemblies

Materials

  • Ceramic
  • Fiberglass
  • Hard fiber
  • Mica
  • Plastic

Ordering & documentation

Documents

Shipments of Insulating Isolation Washer Sets are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Insulating Isolation Washer Sets orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (Insulating Isolation Washer Sets), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for Insulating Isolation Washer Sets: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for insulating isolation washer sets is 10,000 pieces (applies to the standard sizes and finishes for insulating isolation washer sets; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for insulating isolation washer sets run 3–7 days. Quantities or variants of insulating isolation washer sets outside the standard range are confirmed at quotation.

Storage & shipping

Insulating Isolation Washer Sets are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store insulating isolation washer sets dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

When do I need a full isolation washer set instead of just an insulating flat washer?

When the fastener shank itself can complete the circuit. A flat insulating washer under the head isolates only one end — the shank still passes through the mounting hole and, in a conductive housing, touches its wall. If the hole is in metal, the set is the correct answer: the insulating sleeve lines the hole so the shank never contacts it, while the washer isolates the head. For mounting onto a non-conductive surface, a plain insulating flat washer is sufficient and the set adds cost without adding isolation.

What is the MOQ and lead time for this washer type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes in this washer type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Insulating Isolation Washer Sets inquiry

  • ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
  • ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
  • ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
  • ✓ Describe the bearing surface or locking function, quantity per size and destination.
  • ✓ Factory-direct pricing for your Insulating Isolation Washer Sets
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.