DIN 433 Small-OD Flat Washers

Small-outer-diameter flat washers per DIN 433 (ISO 7092 counterpart) — the reduced-series washer for tight bolt patterns and confined bearing faces, dimensioned M1 to M36 in the collected series.

Last updated: 2026-11

Request a Quote

DIN 433 Small-OD Flat Washers in an industrial setting
Illustrative image redrawn from real DIN 433 Small-OD Flat Washers product references — not a photograph of stocked items.

Specifications

DIN 433 is the small-OD, or reduced-series, metric flat washer: for the same bolt size it carries a noticeably smaller outer diameter than the ISO 7089/DIN 125 normal series — 18 mm instead of 21 mm at M10, 34 mm instead of 44 mm at M24 — with the same nominal hole. That reduced footprint is what earns its place: clustered bolt patterns where full-size washers would overlap edges, confined bearing faces on small housings and channels, and assemblies where the washer must stay clear of adjacent geometry. The collected series runs M1 to M36, with thickness scaling from 0.3 mm at the small end to 5 mm at M36.

Standard DIN 433 — small outer diameter flat washers (ISO 7092 counterpart)
Series range M1 to M36 in the collected dimension series (metric reduced series)
Worked row (M10) 10.5 mm hole × 18 mm outer diameter × 1.6 mm thick (vs 21 mm OD in the normal series)
Worked row (M24) 25 mm hole × 39 mm outer diameter × 4 mm thick (vs 44 mm OD in the normal series)
Selection rule Choose where full-size washers would overlap in clustered patterns or foul adjacent geometry
Stock range Collected stock statement: M1.5 to M20 in A2 and marine-grade A4 stainless steel
Stainless strength classes A2/A4 austenitic classes 50 (to M39), 70 (to M20), 80 (to M20) — 500/700/800 N/mm²
DIN 433 small-series flat washers - per-size dimensions (M1 - M36)All dimensions in millimeters; weight per 1000 pieces. Source states hardness up to 250 HV, designed for use with cheese head screws.
For nominal threadHole d min (= nominal) (mm)Hole d max (mm)dc max (mm)dc min (mm)h nominal (mm)h max (mm)h min (mm)Weight (kg / 1000 pcs)
M11.11.242.52.250.30.350.250.01
M1.21.31.4432.750.30.350.250.014
M1.41.51.6432.750.30.350.250.012
M1.61.71.843.53.20.30.350.250.017
M1.822.1443.70.30.350.250.022
M22.22.344.54.20.30.350.250.029
M2.52.72.8454.70.50.550.450.055
M33.23.3865.70.50.550.450.079
M3.53.73.8876.640.50.550.450.109
M44.34.4887.640.50.550.450.14
M55.35.4898.6411.10.90.326
M66.46.621110.571.61.81.40.79
M88.48.621514.571.61.81.41.52
M1010.510.771817.571.61.81.42.11
M121313.272019.4822.21.82.85
M141515.272423.482.52.72.35.41
M161717.272827.482.52.72.37.63
M181919.333029.482.52.72.38.31
M202121.333433.3833.32.713.2
M242525.333938.3844.33.722.1
M303131.395049.3844.33.738
M363737.625856.855.64.461.5

Materials

  • Stainless steel A2
  • Stainless steel A4

Ordering & documentation

Documents

Shipments of DIN 433 Small-OD Flat Washers are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 433 Small-OD Flat Washers orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 433 Small-OD Flat Washers), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 433 Small-OD Flat Washers: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 433 small-od flat washers is 10,000 pieces (applies to the standard sizes and finishes for din 433 small-od flat washers; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 433 small-od flat washers run 3–7 days. Quantities or variants of din 433 small-od flat washers outside the standard range are confirmed at quotation.

Storage & shipping

DIN 433 Small-OD Flat Washers are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 433 small-od flat washers dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why choose a reduced-series DIN 433 washer over the standard ISO 7089 series?

Because the extra diameter of a standard washer only pays when it has room to work. In a clustered bolt pattern, full-size washers can overlap or come edge-to-edge, leaving uneven bearing; on narrow flanges, channel webs and small housings, the normal-series OD can hang past the face it is meant to bear on. The DIN 433 series trims the outer diameter — 18 mm versus 21 mm at M10, 39 mm versus 44 mm at M24 — while keeping the nominal hole, so the joint keeps its bearing area where it fits and gives up nothing but the footprint it cannot use.

What does the reduced outer diameter cost, and when is it the wrong choice?

Bearing area. The trimmed annulus raises surface pressure under the same clamp load, which is fine on solid steel and other hard bearing faces but is exactly the wrong trade on soft substrates — thin sheet, plastics, aluminum housings — where a lower-pressure, larger footprint is what prevents pull-through and creep. The reduced series also gives less margin for a worn or slotted hole, since a fender-scale washer cannot be fitted in a tight cluster. The selection order is substrate first, geometry second: keep the ISO 7089/DIN 125 normal series whenever the bearing face is soft or the hole condition is uncertain, and reach for DIN 433 only when the cluster or housing geometry actually forbids the full-size footprint.

What is the MOQ and lead time for this washer type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes in this washer type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for this washer type state?

State the standard designation and form (for example ISO 7090 chamfered or DIN 7980 high-collar), the nominal bolt or screw size it must fit, material and hardness requirements, finish (plain, zinc-plated, or hot-dip galvanized where the assembly calls for it), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 433 Small-OD Flat Washers inquiry

  • ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
  • ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
  • ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
  • ✓ Describe the bearing surface or locking function, quantity per size and destination.
  • ✓ Factory-direct pricing for your DIN 433 Small-OD Flat Washers
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.