DIN 127B Helical Spring Lock Washers (Dimension Table)
DIN 127B helical spring lock washers, Φ2 to Φ100 — the full collected 30-size table across 11 block tables: bore d, section thickness n, free height h and loaded height H with their tolerance bands, plus the source's reference mass per 1000 units.
Last updated: 2026-11
Specifications
DIN 127B is the designation behind the classic split spring lock washer: a helical ring of square section, cut through at one point, that flattens under the nut and pushes back against it. The collected table is the dimension series behind the qualitative DIN 127 page on this site — every size from Φ2 to Φ100, in eleven block tables, each tabulating four dimension rows with their own limits: the bore d (min/max), the square section thickness n (Nominal / max / min), the free height h (Nominal / max / min) — the lift the ring delivers before flattening — and the loaded height H (min/max), the crushed height the joint actually sees at full clamp. The source also prints a reference mass per 1000 units per size. Note the design constant the table makes visible: H is roughly twice h across the series — the washer still carries about half its free spring height when fully flattened, which is what keeps tension on the nut after tightening. Materials and finishes are not printed by the collected specification and stay per RFQ.
| Standard | DIN 127B — helical spring lock washer, split type, square section (size-series table; qualitative DIN 127 overview on its own page) |
|---|---|
| Series | Φ2 – Φ100 (30 sizes across 11 block tables) |
| Tabulated geometry | Per size: bore d (min / max), section thickness n (Nominal / max / min), free height h (Nominal / max / min), loaded height H (min / max), reference mass per 1000 units ≈ kg |
| Dimensions at Φ8 | d 8.1–8.5; n nominal 3 (max 3.15 / min 2.85); h nominal 2 (max 2.1 / min 1.9); H 4–4.7; weight 1.6 kg/1000 |
| Dimensions at Φ16 | d 16.2–17; n nominal 5 (max 5.2 / min 4.8); h nominal 3.5 (max 3.7 / min 3.3); H 7–8.3; weight 8.91 kg/1000 |
| Dimensions at Φ36 | d 36.5–37.7; n nominal 10 (max 10.25 / min 9.75); h nominal 6 (max 6.2 / min 5.8); H 12–14.2; weight 67.3 kg/1000 |
| Geometry note | Loaded height H ≈ 2× free height h across the series — about half the spring lift remains at full clamp |
| Materials / strength | Not tabulated by the collected specification — per RFQ (spring steel grade and finish per drawing callout) |
Materials
- Material and finish specified per RFQ — the collected specification table covers geometry and reference mass only
Ordering & documentation
Documents
Shipments of DIN 127B Helical Spring Lock Washers (Dimension Table) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 127B Helical Spring Lock Washers (Dimension Table) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 127B Helical Spring Lock Washers (Dimension Table)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 127B Helical Spring Lock Washers (Dimension Table): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 127b helical spring lock washers (dimension table) is 10,000 pieces (applies to the standard sizes and finishes for din 127b helical spring lock washers (dimension table); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 127b helical spring lock washers (dimension table) run 3–7 days. Quantities or variants of din 127b helical spring lock washers (dimension table) outside the standard range are confirmed at quotation.
Storage & shipping
DIN 127B Helical Spring Lock Washers (Dimension Table) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 127b helical spring lock washers (dimension table) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
How does this table relate to the DIN 127 overview page?
The overview page explains the locking mechanism and where split washers do and do not hold. This page carries the DIN 127B size series itself: bore limits, section thickness, free and loaded height for each of the 30 collected sizes from Φ2 to Φ100. Use the overview to choose the locking approach; use this table to pick the size, check the bore against the bolt clearance, and confirm the loaded height H leaves the right crushed height in the joint stack.
Why does the loaded height H matter for the joint stack?
H is what remains of the washer at full clamp: the collected table shows H min about twice the section thickness n (for example 4–4.7 mm on the Φ8 size with n 3). When you stack a spring washer into a known grip length, budget H min into it — if the joint bottoms out before the washer flattens to H, the clamp never develops; if the stack is loose, the washer carries no tension at all. That is also why hardened flat washers, not spring washers, carry the load in high-strength joints: the spring section is a locking aid, not a load-bearing face.
What is the MOQ and lead time for this washer type?
Minimum order quantity is 1,000 pieces per item. Standard samples ship in 3–5 days, bulk standard parts in 15–25 days, and custom OEM parts in 30–45 days. Common sizes are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 127B Helical Spring Lock Washers (Dimension Table) inquiry
- ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
- ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
- ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
- ✓ Describe the bearing surface or locking function, quantity per size and destination.
- ✓ Factory-direct pricing for your DIN 127B Helical Spring Lock Washers (Dimension Table)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support