DIN 128B Spring Lock Washers, Type B (Heavy Pattern)
DIN 128B spring lock washers type B, sizes 2 to 100 — the heavy-pattern helical washer for large-diameter bolted joints — with the full collected 28-size table: bore, section width, material thickness, free height and the source's reference mass per 1000 units.
Last updated: 2026-11
Specifications
DIN 128B is the type B spring lock washer: the heavy pattern of the helical family, with no adsorbing collar, running from size 2 all the way to 100 — the sizes where a collar would be impractical and the coil section is what carries the work. At the large end the washer is a serious spring: 12 mm section at size 48, 14 mm at sizes 56 through 100, giving the joint a maintained axial load under a heavy bolt. The collected table covers 28 sizes with bore d (min / max), section width n (Nominal Size / min / max), material thickness h (Nominal Size / min / max), free height H (min / max), and the source's reference mass per 1000 units. Spring force, materials and finishes are not printed by the collected specification and stay per RFQ. For the collared type A form see DIN 128A on this site.
| Standard | DIN 128 form B — helical spring lock washers, heavy pattern (no collar) |
|---|---|
| Series | 2 – 100 (28 sizes tabulated), matching nominal bolt diameters |
| Tabulated geometry | Per size: bore d (min / max), section width n (Nominal Size / min / max), thickness h (Nominal Size / min / max), free height H (min / max), reference mass per 1000 units ≈ kg |
| Function | Heavy helical coil maintains axial load under large bolts across a very wide size range |
| Spring force / materials | Not tabulated by the collected specification — per RFQ (spring steel grade and finish per drawing callout) |
| Size | d — min | d — max | n — Nominal Size | n — min | n — max | h — Nominal Size | h — min | h — max | H — min | H — max | per 1000 units ≈ kg |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 | 2.1 | 2.4 | 0.9 | 0.8 | 1 | 0.5 | 0.4 | 0.6 | 0.7 | 0.9 | 0.035 |
| 2.5 | 2.6 | 2.9 | 1 | 0.9 | 1.1 | 0.6 | 0.5 | 0.7 | 0.9 | 1.1 | 0.055 |
| 3 | 3.1 | 3.4 | 1.3 | 1.2 | 1.4 | 0.7 | 0.6 | 0.8 | 1.1 | 1.3 | 0.09 |
| 3.5 | 3.6 | 3.9 | 1.3 | 1.2 | 1.4 | 0.7 | 0.6 | 0.8 | 1.1 | 1.3 | 0.1 |
| 4 | 4.1 | 4.4 | 1.5 | 1.4 | 1.6 | 0.8 | 0.7 | 0.9 | 1.2 | 1.4 | 0.15 |
| 5 | 5.1 | 5.4 | 1.8 | 1.7 | 1.9 | 1 | 0.9 | 1.1 | 1.5 | 1.7 | 0.3 |
| 6 | 6.1 | 6.5 | 2.5 | 2.4 | 2.6 | 1.3 | 1.2 | 1.4 | 2 | 2.2 | 0.7 |
| 7 | 7.1 | 7.5 | 2.5 | 2.35 | 2.65 | 1.3 | 1.2 | 1.4 | 2 | 2.2 | 0.75 |
| 8 | 8.1 | 8.5 | 3 | 2.85 | 3.15 | 1.6 | 1.5 | 1.7 | 2.45 | 2.75 | 1.3 |
| 10 | 10.2 | 10.7 | 3.5 | 3.3 | 3.7 | 1.8 | 1.7 | 1.9 | 2.85 | 3.15 | 2.1 |
| 12 | 12.2 | 12.7 | 4 | 3.8 | 4.2 | 2.1 | 1.95 | 2.25 | 3.35 | 3.65 | 3.2 |
| 14 | 14.2 | 14.7 | 4.9 | 4.7 | 5.1 | 2.4 | 2.25 | 2.55 | 3.9 | 4.3 | 4.8 |
| 16 | 16.2 | 17 | 5 | 4.8 | 5.2 | 2.8 | 2.65 | 2.95 | 4.5 | 5.1 | 7 |
| 18 | 18.2 | 19 | 5 | 4.8 | 5.2 | 2.8 | 2.65 | 2.95 | 4.5 | 5.1 | 7.8 |
| 20 | 20.2 | 21.2 | 6 | 5.8 | 6.2 | 3.2 | 3 | 3.4 | 5.1 | 5.9 | 12.2 |
| 22 | 22.5 | 23.5 | 6 | 5.8 | 6.2 | 3.2 | 3 | 3.4 | 5.1 | 5.9 | 13.3 |
| 24 | 24.5 | 25.5 | 7 | 6.75 | 7.25 | 4 | 3.8 | 4.2 | 6.5 | 7.5 | 21.5 |
| 27 | 27.5 | 28.5 | 7 | 6.75 | 7.25 | 4 | 3.8 | 4.2 | 6.5 | 7.5 | 23.7 |
| 30 | 30.5 | 31.7 | 8 | 7.75 | 8.25 | 6 | 5.8 | 6.2 | 9.5 | 10.5 | 42.5 |
| 36 | 36.5 | 37.7 | 10 | 9.75 | 10.25 | 6 | 5.8 | 6.2 | 10.3 | 11.3 | 68 |
| 42 | 42.5 | 43.7 | 12 | 11.75 | 12.25 | 7 | 6.75 | 7.25 | 12 | 13 | 111 |
| 48 | 49 | 50.5 | 12 | 11.75 | 12.25 | 7 | 6.75 | 7.25 | 12 | 13 | 123 |
| 56 | 57 | 58.5 | 14 | 13.75 | 14.25 | 8 | 7.75 | 8.25 | 14 | 15.5 | 193 |
| 64 | 65 | 66.5 | 14 | 13.75 | 14.25 | 8 | 7.75 | 8.25 | 14 | 15.5 | 218 |
| 72 | 73 | 74.5 | 14 | 13.75 | 14.25 | 8 | 7.75 | 8.25 | 14 | 15.5 | 240 |
| 80 | 81 | 82.5 | 14 | 13.75 | 14.25 | 8 | 7.75 | 8.25 | 14 | 15.5 | 262 |
| 90 | 91 | 92.5 | 14 | 13.75 | 14.25 | 8 | 7.75 | 8.25 | 14 | 15.5 | 290 |
| 100 | 101 | 102.5 | 14 | 13.75 | 14.25 | 8 | 7.75 | 8.25 | 14 | 15.5 | 318 |
Materials
- Material and finish specified per RFQ — spring performance depends on the tempered spring-steel grade; confirm at quotation
Ordering & documentation
Documents
Shipments of DIN 128B Spring Lock Washers, Type B (Heavy Pattern) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 128B Spring Lock Washers, Type B (Heavy Pattern) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 128B Spring Lock Washers, Type B (Heavy Pattern)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 128B Spring Lock Washers, Type B (Heavy Pattern): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 128b spring lock washers, type b (heavy pattern) is 10,000 pieces (applies to the standard sizes and finishes for din 128b spring lock washers, type b (heavy pattern); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 128b spring lock washers, type b (heavy pattern) run 3–7 days. Quantities or variants of din 128b spring lock washers, type b (heavy pattern) outside the standard range are confirmed at quotation.
Storage & shipping
DIN 128B Spring Lock Washers, Type B (Heavy Pattern) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 128b spring lock washers, type b (heavy pattern) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Which spring washer for large-diameter bolts?
The heavy type B pattern exists because a spring washer scales badly: a plain DIN 127 washer at size 56 and above would need an impractical section to load the joint. DIN 128B carries a 14 mm section into the large sizes, so large bearing bolts, flanges and structural machine joints keep a live coil without changing washer type. Size it from the table — bore, section n and free height H are the three numbers that matter — and be honest about the joint: a spring washer maintains load, it does not create clamp force, so the bolt still has to be tightened to its proper preload first. Where the face is uneven, pair it with a plain washer to give the coil a flat seat.
What is the MOQ and lead time for this washer type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 128B Spring Lock Washers, Type B (Heavy Pattern) inquiry
- ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
- ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
- ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
- ✓ Describe the bearing surface or locking function, quantity per size and destination.
- ✓ Factory-direct pricing for your DIN 128B Spring Lock Washers, Type B (Heavy Pattern)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support