ISO 7092 Washers for Cheese Head Screws
ISO 7092 small-series plain washers for cheese head screws — nominal sizes 1,1 to 37 mapped M1 to M36, the compact outside diameter that fits under small cylindrical heads, with the collected d1/d2/h ladder and kg/1000 weights.
Last updated: 2026-11
Specifications
ISO 7092 is the small-series washer matched to cheese head screws and other small cylindrical heads: a reduced outside diameter (5 mm at M2,5, 9 mm at M5 — roughly 1,8 d) that slips under a head whose bearing circle is narrow, in the machine-assembly gauges from M1 up to M36. The collected ladder tabulates each size with bore min/max, outside max/min, thickness nominal/max/min and a kg/1000 pcs weight (0,01 g-class at M1 up to 61,5 kg at M36). Size the washer by the screw — the "For thread" column in the collected table maps each nominal size to its thread — and expect the bore to run a hair over the thread nominal for clearance (M5 washers: 5,3 mm bore). One verbatim quirk is flagged on the table: the source prints the M2,5 bore max (2,64) below its min (2,7), so quote that size's bore per RFQ if it is measurement-critical. Material and finish are not tabulated by the collected specification — per RFQ.
| Standard | ISO 7092 — plain washers, small series, for cheese head screws |
|---|---|
| Size range | Nominal sizes 1,1 – 37, mapped to threads M1 – M36 per the source's "For thread" column |
| Hole diameter | d1: min./max. per size (e.g. M5: 5,3 / 5,48 mm); M2,5 min/max print flagged verbatim |
| Outside diameter | d2: max./min. per size (e.g. M5: 9 / 8,64 mm) |
| Thickness | h: nominal / max. / min. per size (e.g. M5: 1 / 1,1 / 0,9 mm) |
| Weight | kg/1000 pcs column carried verbatim (0,01 → 61,5) |
| Material / finish | Not tabulated by the collected specification — per RFQ |
| Nominal size | For thread | d1 min. | d1 max. | d2 max. | d2 min. | h Nominal size | h max. | h min. | Weight kg/1000pcs |
|---|---|---|---|---|---|---|---|---|---|
| 1,1 | M1 | 1,1 | 1,24 | 2,5 | 2,25 | 0,3 | 0,35 | 0,25 | 0,01 |
| 1,3 | M1,2 | 1,3 | 1,44 | 3 | 2,75 | 0,3 | 0,35 | 0,25 | 0,014 |
| 1,5 | M1,4 | 1,5 | 1,64 | 3 | 2,75 | 0,3 | 0,35 | 0,25 | 0,012 |
| 1,7 | M1,6 | 1,7 | 1,84 | 3,5 | 3,2 | 0,3 | 0,35 | 0,25 | 0,017 |
| 2 | M1,8 | 2 | 2,14 | 4 | 3,7 | 0,3 | 0,35 | 0,25 | 0,022 |
| 2,2 | M2 | 2,2 | 2,34 | 4,5 | 4,2 | 0,3 | 0,35 | 0,25 | 0,029 |
| 2,7 | M2,5 | 2,7 | 2,64 | 5 | 4,7 | 0,5 | 0,55 | 0,45 | 0,065 |
| 3,2 | M3 | 3,2 | 3,38 | 6 | 5,7 | 0,5 | 0,55 | 0,45 | 0,079 |
| 3,7 | M3,5 | 3,7 | 3,88 | 7 | 6,64 | 0,5 | 0,55 | 0,45 | 0,109 |
| 4,3 | M4 | 4,3 | 4,48 | 8 | 7,64 | 0,5 | 0,55 | 0,45 | 0,14 |
| 5,3 | M5 | 5,3 | 5,48 | 9 | 8,64 | 1 | 1,1 | 0,9 | 0,32 |
| 6,4 | M6 | 6,4 | 6,62 | 11 | 10,57 | 1,6 | 1,8 | 1,4 | 0,79 |
| 8,4 | M8 | 8,4 | 8,62 | 15 | 14,57 | 1,6 | 1,8 | 1,4 | 1,52 |
| 10,5 | M10 | 10,5 | 10,77 | 18 | 17,57 | 1,6 | 1,8 | 1,4 | 2,11 |
| 13 | M12 | 13 | 13,27 | 20 | 19,48 | 2 | 2,2 | 1,8 | 2,65 |
| 15 | M14 | 15 | 15,27 | 24 | 23,48 | 2,5 | 2,7 | 2,3 | 5,41 |
| 17 | M16 | 17 | 17,27 | 28 | 27,48 | 2,5 | 2,7 | 2,3 | 7,63 |
| 19 | M18 | 19 | 19,33 | 30 | 29,48 | 2,5 | 2,7 | 2,3 | 8,31 |
| 21 | M20 | 21 | 21,33 | 34 | 33,38 | 3 | 3,3 | 2,7 | 13,2 |
| 25 | M24 | 25 | 25,33 | 39 | 39,38 | 4 | 4,3 | 3,7 | 22,1 |
| 31 | M30 | 31 | 31,39 | 50 | 49,38 | 4 | 4,3 | 3,7 | 38 |
| 37 | M36 | 37 | 37,62 | 58 | 56,8 | 5 | 5,6 | 4,4 | 61,5 |
- Row 7 (2,7): Nominal size 2,7 (M2,5): the source prints d1 min. 2,7 and d1 max. 2,64 — max. below min. Carried verbatim, not normalized.
Materials
- Material and finish specified per RFQ — small-series washers for instrument and machine assembly are commonly steel or stainless; state the application at quotation
Ordering & documentation
Documents
Shipments of ISO 7092 Washers for Cheese Head Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 7092 Washers for Cheese Head Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ISO 7092 Washers for Cheese Head Screws), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for ISO 7092 Washers for Cheese Head Screws: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for iso 7092 washers for cheese head screws is 10,000 pieces (applies to the standard sizes and finishes for iso 7092 washers for cheese head screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 7092 washers for cheese head screws run 3–7 days. Quantities or variants of iso 7092 washers for cheese head screws outside the standard range are confirmed at quotation.
Storage & shipping
ISO 7092 Washers for Cheese Head Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 7092 washers for cheese head screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Why choose the small series over a normal-series washer for a small screw?
Bearing area versus clearance. A cheese head screw bears on a circle roughly equal to its own head diameter, so a normal-series washer whose outside diameter is 2,5–3× the thread sticks out past the head and carries no load on the overhang — it also needs more room on crowded mounting plates. ISO 7092 keeps the outside diameter close to the head (9 mm at M5 against the normal series' 10 mm and the ISO 7093 large series' 15 mm), so the washer spreads the head load without overhanging. The collected weights make the material saving legible too: 0,32 kg/1000 at M5. If your seat is flat steel and clearance is no issue, the ISO 7089/7090 pages carry the normal-series ladders; material and finish go on the RFQ either way.
What is the MOQ and lead time for ISO 7092 Washers for Cheese Head Screws?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for ISO 7092 Washers for Cheese Head Screws state?
State the full designation (ISO 7092), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ISO 7092 Washers for Cheese Head Screws inquiry
- ✓ Identify the washer form and dimensional standard (for example flat, fender, spring-lock or hardened structural washer).
- ✓ Give the mating bolt size plus inside diameter, outside diameter and thickness; include the applicable dimensional series.
- ✓ State washer material and any specified hardness class or coating. Washer hardness is not a bolt property class.
- ✓ Describe the bearing surface or locking function, quantity per size and destination.
- ✓ Factory-direct pricing for your ISO 7092 Washers for Cheese Head Screws
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support